Vista VVRD28V12CM760H, VVRD28V12DN760H, VVRD28V12DNLED760H Installation Manual

Set up and user manual for the

VVRD28V12CM760H

VVRD28V12DN760H

VVRD28V12DNLED760H

Cameras

Installation Manual

1

2

Before You Begin

Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should

conform to local codes.
This manual provides installation and operation information. To use this document, you

must have the following minimum qualifications:

 A basic knowledge of CCTV systems and components
 A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and
user documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer
to this document and any other documentation provided. If you still have questions,
please contact Norbain Technical Support and Sales:

Vista, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41
5TP, England.

UK [phone]

Note: You should be at the equipment and ready with details before calling Technical

Support.

Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING,

CAUTION and Note statements identify potential hazards that can occur if the

equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or
equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

3

This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU
standards has been made. The manufacturer declares that the product
supplied with this document is compliant the provisions of the EMC
Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all
associated amendments.

All lead-free products offered by the company comply with the
requirements of the European law on the Restriction of Hazardous
Substances (RoHS) directive: 2011/65/EU, which means our
manufacture processes and products are strictly “lead-free” and
without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the
European Union the product must be collected separately at the
product end-of-life. This applies to your product and any peripherals
marked with this symbol. Do not dispose of these products as
unsorted municipal waste.

* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.

NORBAIN SD LTD reserves the right to make changes to the product and specification
of the product from time to time without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the
ventilation grills or other openings on the equipment.

CAUTION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

4

IMPORTANT SAFEGUARDS

1. READ AND RETAIN INSTRUCTIONS

Read the instruction manual before operating the equipment.
Retain the manual for future reference.

2. CLEANING

Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth
for cleaning. Do not use harsh cleansers or aerosol cleaners.

3. ATTACHMENTS

Do not use attachments unless recommended by manufactured as they may affect
the functionality of the unit and result in the risk of fire, electric shock or injury.

4. MOISTURE

Do not use equipment near water or other liquids.

5. ACCESSORIES

Equipment should be installed in a safe, stable location. Any wall or shelf mounting
accessory equipment should be installed using the manufacture's Instructions. Care
should be used when moving heavy equipment. Quick stops, excessive force, and
uneven surfaces may cause the equipment to fall causing serious injury to persons
and objects.

6. VENTILATION

Openings in the equipment, if any, are provided for ventilation to ensure reliable
operation of the unit and to protect if from overheating. These openings must not be
blocked or covered

7. POWER SOURCES

The equipment should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supplied at the installation
location, contact your dealer. For equipment designed to operate from battery
power, refer to the operating instructions.

8. GROUNDING OR POLARIZATION

Equipment that is powered through a polarized plug (a plug with one blade wider
than the other) will fit into the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try reversing the plug. Do not
defeat the safety purpose of the polarized plug.
Alternate Warning: If the equipment is powered through a three-way grounding­type plug, a plug having a third (grounding) pin, the plug will only fit into a grounding­type power outlet. This is a safety feature. Do not defeat the safety purpose of the
grounding-type plug.
If your outlet does not have the grounding plug receptacle, contact your local
electrician.

9. CORD AND CABLE PROTECTION

Route power cords and cables in such a manner to protect them from damage by
being walked on or pinched by items places upon or against them.

10. LIGHTNING

For protection of the equipment during a lightning storm or when it is left unattended
and unused for long periods of time, unplug the unit from the wall outlet. Disconnect
any antennas or cable systems that may be connected to the equipment.

This will prevent damage to the equipment due to Lightning or power-line surges.

11. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.

5

12. SERVICING

Do not attempt to service the video monitor or equipment yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

13. DAMAGE REQUIRING SERVICE

Unplug the equipment from the wall outlet and refer servicing to qualified service

personnel under the Following conditions:
A. When the power supply cord or the plug has been damaged.
B. If liquid has spilled or objects have fallen into the Unit.

C. If the equipment has been exposed to water or other liquids.

D. If the equipment does not operate normally by following the operating

instructions, adjust those controls that are covered by the operating instructions as

Improper adjustment for other controls may result in damage to the unit.
E. If the equipment has been dropped or the casing is damaged.
F. When the equipment exhibits a distinct change in performance.

14. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses

replacement parts specified by the manufacturer or that have the same

characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.

15. SAFETY CHECK

Upon completion of any service or repairs to the equipment, ask the service

technician to perform safety checks to verify that the equipment is in proper

operating condition.

16. FIELD INSTALLATION

The installation of equipment should be made by a qualified service person and

should conform to all local codes.

17. CAUTION

THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE

PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE

OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

18. Use certified/Listed Class 2 power source only.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.