Vista VK2-PVM27CAM, VK2-PVM32CAM Quick Start Manual

i

Quick start guide for the

VK2-PVM27CAM
VK2-PVM32CAM

ii

Before You Begin

Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should conform to local

codes.
This manual provides installation and operation information. To use this document, you must have

the following minimum qualifications:

 A basic knowledge of CCTV systems and components
 A basic knowledge of electrical wiring, low-voltage electrical connections and IP networking /

infrastructure

Intended use

Only use this product for its designated purpose; refer to the product specification and user
documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to this
document and any other documentation provided. If you still have questions, please contact
Norbain Technical Support and Sales:

Norbain SD,Inspired, East Hampstead RD, Bracknell, RG12 1YQ.
UK [phone] Vista Technical Helpline: [phone]

Note: You should be at the equipment and ready with details before calling Vista Technical

Support.

Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CAUTION and
Note statements identify potential hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

iii

This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU standards has been
made. The manufacturer declares that the product supplied with this document is
compliant the provisions of the EMC Directive 2004/108/EC, the CE Marking Directive
93/68 EEC and all associated amendments.

All lead-free products offered by the company comply with the requirements of the
European law on the Restriction of Hazardous Substances (RoHS) directive:

2011/65/EU, which means our manufacture processes and products are strictly “lead­free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the
product must be collected separately at the product end-of-life. This applies to your
product and any peripherals marked with this symbol. Do not dispose of these
products as unsorted municipal waste.

* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.

NORBAIN SD reserves the right to make changes to the product and specification of the product
from time to time without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation
grills or other openings on the equipment.

CAUTION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

iv

IMPORTANT SAFEGUARDS

1. READ AND RETAIN INSTRUCTIONS

Read the instruction manual before operating the equipment. Retain the manual for future
reference.

2. CLEANING

Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth for
cleaning. Do not use harsh cleansers or aerosol cleaners.

3. ATTACHMENTS

Do not use attachments unless recommended by manufactured as they may affect the
functionality of the unit and result in the risk of fire, electric shock or injury.

4. MOISTURE

Do not use equipment near water or other liquids unless it is IP rated.

5. ACCESSORIES

Equipment should be installed in a safe, stable location. Any wall or shelf mounting accessory
equipment should be installed using the manufacture's Instructions. Care should be used when
moving heavy equipment. Quick stops, excessive force, and uneven surfaces may cause the
equipment to fall causing serious injury to persons and objects.

6. VENTILATION

Openings in the equipment, if any, are provided for ventilation to ensure reliable operation of the
unit and to protect if from overheating. These openings must not be blocked or covered.

7. POWER SOURCES

The equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied at the installation location, contact your
dealer. For equipment designed to operate from battery power, refer to the operating
instructions.

8. GROUNDING OR POLARIZATION

Equipment that is powered through a polarized plug (a plug with one blade wider than the other)
will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized
plug.
Alternate Warning: If the equipment is powered through a three-way grounding-type plug, a
plug having a third (grounding) pin, the plug will only fit into a grounding-type power outlet. This
is a safety feature. Do not defeat the safety purpose of the grounding-type plug. If your outlet
does not have the grounding plug receptacle, contact your local electrician.

9. CORD AND CABLE PROTECTION

Route power cords and cables in such a manner to protect them from damage by being walked
on or pinched by items places upon or against them.

10. LIGHTNING

For protection of the equipment during a lightning storm it is recommended that adequate surge
protection is used. This will assist / prevent damage to the equipment due to lightning or power­line surges.

11. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.

12. SERVICING

Unless qualified to do so, do not attempt to service the equipment yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.

13. DAMAGE REQUIRING SERVICE

Unplug the equipment from the wall outlet and refer servicing to qualified service personnel

under the Following conditions:
A. When the power supply cord or the plug has been damaged.
B. If liquid has spilled or objects have fallen into the Unit.
C. If the equipment has been exposed to water or other liquids.