Vista VK2-3MPVRDIR37e Installation Manual

VK2-3MPVRDIR37e

INSTALLATION MANUAL

Please read this manual thoroughly before use and keep it handy for future reference.

2

Before You Begin

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have the
following minimum qualifications:

 A basic knowledge of CCTV systems and components
 A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and user
documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to this
document and any other documentation provided. If you still have questions, please contact Norbain
Technical Support and Sales:

Norbain SD, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41 5TP, England.
UK [phone]

Note: You should be at the equipment and ready with details before calling Technical Support.

Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note

statements identify potential hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU standards has been made. The
manufacturer declares that the product supplied with this document is compliant the provisions of
the EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all associated
amendments.

All lead-free products offered by the company comply with the requirements of the European
law on the Restriction of Hazardous Substances (RoHS) directive: 2011/65/EU, which means
our manufacture processes and products are strictly “lead-free” and without the hazardous
substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must
be collected separately at the product end-of-life. This applies to your product and any
peripherals marked with this symbol. Do not dispose of these products as unsorted municipal
waste.

* This symbol indicates electrical warnings and cautions.

** This symbol indicates general warnings and cautions.

NORBAIN SD reserves the right to make changes to the product and specification of the product from time to
time without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other
openings on the equipment.

3

IMPORTANT SAFEGUARDS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that product heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE

PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM
ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.

15. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 powe

r source only.

16. ITE is to be connected only to PoE networks without routing to the outside plant.

4

CE COMPLIANCE STATEMENT

Contents

WARNING

This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

5

Contents

1

Introduction 6

1.1 Components

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.2

Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2

Installation 8

2.1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2

Connection ........................................................................................................................ 10

2.3

Resetting to the factory default settings ....................................................................... 11

A Appendix 12

A.1 Product Specification ....................................................................................................... 12