How it Works
Vista
Loading...
Quantum Evolution QUANTUM04DVDXXXEVs

Vista Quantum Evolution QUANTUM04DVDXXXEVs, Quantum Evolution QUANTUM04-XXEVs, Quantum Evolution QUANTUM08DVDXXXEVs, Quantum Evolution QUANTUM16DVDXXXEVs Installation And User Manual

KD16-0205E
Quantum Evolution – Installation and User manual
Intelligent Security & Fire
2
Quantum Evolution installation and user manual
This page is intentionally left blank
Intelligent Security & Fire
3
Quantum Evolution installation and user manual
CE INFORMATION
The product must be installed according to the currently valid installation regulations for EMC to guarantee the designed use and to prevent EMC problems.
The device supplied with this manual is according to the EC, EMC Directive, 89/336/EEC & LVD 73/23/EEC
Standard used for showing compliance with the essential requirements of the device: EN 55022 EN 61000-3-2 EN 61000-3-3 EN 50130-4 EN 55024 LVD: EN60950-1
ELECTRICAL SAFETY
Explanation of electrical safety symbols
Intelligent Security & Fire
4
Quantum Evolution installation and user manual
This page is intentionally left blank
Intelligent Security & Fire
5
Quantum Evolution installation and user manual
Contents
Description
Page No
Safety Precautions
8
Contents of packaging
9
Features
10
Front Panel
11
Rear Panel connections
13
System Connection diagram
15
Remote Control
16
OSD Description ( On Screen Display )
17
Menu Tree
18
Default Password
20
Main Menu
21
Menu Navigation
21
DISPLAY
21
Camera Covert
21
Cameras Name
21
OSD on/off
21
Set Display Sequence
22
Event Clear
22
Camera Control
23
RECORDING
24
Global Parameters
24
Normal Record
25
Alarm Recording
26
Motion Recording
28
Schedule Recording
30
Recording Priority
32
SYSTEM
33
Basic
33
Intelligent Security & Fire
6
Quantum Evolution installation and user manual
Disk Format
36
Password Change
36
Client Account
37
Program Update
38
Sensor
40
Auto Delete Mode
40
PTZ Set-up
41
PTZ Control
42
NETWORK
43
DDNS
43
IP SET
44
EVENT NOTIFICATION
45
E-Mail Registration
45
E-Mail Report
46
Notification Out
46
SEARCHING VIDEO FOOTAGE
47
Date / Time Search
47
Calendar Search
48
DOWNLOADING EVIDENCE
50
LOG
52
VISTA – VIEWER SOFTWARE
53
Minimum PC Specification
53
Live monitoring
54
Recording and Playing back
55
Downloading of video from Quantum Hard drive to PC
57
Playback video downloaded to PC
60
Playback video on PC direct from Quantum hard drive
62
PTZ Control via software
64
SET-UP
65
Remote Set-up
65
Local Set-up
67
Firmware Upgrade
68
Intelligent Security & Fire
7
Quantum Evolution installation and user manual
Explanation of on screen buttons
70
APPENDIX 1 – Alarm Sensor Installation
72
APPENDIX 2 – DYNAMIC IP (Supporting DDNS)
75
APPENDIX 3 – Setup for DVR port / Web server port using IP Sharing router ( Port Forwarding)
77
APPENDIX 4 – Making a partition on an External USB hard drive
79
APPENDIX 5 – System Specification
85
Intelligent Security & Fire
8
Quantum Evolution installation and user manual
SAFETY PRECAUTIONS
CAUTION BEFORE USE
Please read this manual before installing or using the Vista Quantum DVR. Please keep this manual in a safe place, to allow for future reference For the safety and proper use, The DVR is marked with various symbols. Please read these to prevent injury of financial loss.
INSTALLATION SITE
Ensure installation position is level, secure and adequately ventilated. Avoid installing close to sources of humidity or water.
Intelligent Security & Fire
9
Quantum Evolution installation and user manual
CONTENTS OF PACKAGING
Power Cable
Digital Video Recorder System
User Manual
Remote Controller ( Not included with 4chn Non DVD units)
Battery
Intelligent Security & Fire
10
Quantum Evolution installation and user manual
FEATURES
● Convenience
- User-friendly GUI ( Graphic Based User Interface)
- Easy-to-use menu structure
- Easy-to-use recorded data search (Time, Date, Motion, Alarm)
● Stability
- Auto restart after power interruption
- DB structure offers data stabilization and best storage utilization
● Expandability
- Various remote multi DVR‟s can be controlled by Web browser (PC Client System)
● Technology
- Embedded LINUX OS
- Maximum recording rate 100 fps
- High-resolution & high-quality MPEG-4 algorithm
- Using Water marking & scrambling technologies,
- MPEG-4: 1 ~ 2 Kbytes per image with resolution 360x240
● Functionality
- Variable recording function (normal, alarm, motion, schedule)
- Full channel real-time monitoring
- Live monitoring, recording, playback, backup and remote access similtaneously
- Multi channel playback
- Variable events notification to e-mail, buzzer or PC Client system
Intelligent Security & Fire
11
Quantum Evolution installation and user manual
FRONT PANEL
(1) LED
- REC: Recording status (When recording is on, the red light is blinking)
- PWR: System Power On/Off (When power is on, the green light is lit up)
(2) USB 2.0 PORT
- USB2.0 connector, for downloading to USB pens / drives (plus upgrading firmware )
(3) POWER BUTTON
- System Power On/Off
(4) NUMERIC & CHARACTER
- Input for numeric‟s & letters
(5) MENU
- Displays the menu on the screen
(6) SEARCH
- Entering search mode
(7) PLAY ( )
- Playback of the recorded data
- When in play mode press again to enter fast forward mode.
(8) REWIND ( )
- Playback on the reverse
Intelligent Security & Fire
12
Quantum Evolution installation and user manual
(9) PAUSE ( ▌▌)
- To freeze picture on playback mode and live mode.
(10) STOP / EJECT ( █ )
- To stop playback and go back to live mode.
- To eject DVD-RW
(11) REC (●)
- It starts & stop manual recording of relevant camera in a full screen live mode.
(12) VOL (▲▼)
- To make the volume up and down.
(13) AUDIO (8/16CH only)
- When user select “audio” key, available audio will be switched.
(14) ARROW KEY
- Moves the cursor while in menu mode
- Selection of multi screen functions
(15) SELECT
- Menu selection
Intelligent Security & Fire
13
Quantum Evolution installation and user manual
REAR PANEL CONNECTIONS
(1) Video Input (BNC)
- 4,8,16 Camera input (1.0 v p-p, 75Ω)
(2) Video Out (BNC / S-VIDEO / VGA)
- Composite Output through BNC / S-VIDEO / VGA
(3) Line Audio Input
- 4 Audio Input on 8 and 16 channel, single audio on 4 channel
< 4Channel Quantum>
< 8/16 Channel Quantum>
Intelligent Security & Fire
14
Quantum Evolution installation and user manual
(4) Audio Output
- 1 Audio Output
(5) RS232 (8/16 channel only)
- 1 Serial Communication
(6) Network Port (RJ-45)
- Available to monitor live screen and recorded data on the HDD through Internet or LAN
(7) DIP switch (NTSC/PAL Video Selection)
-Selectable either NTSC or PAL
ATTENTION
When the video format is changed, the system should be re-booted; the video format should be selected before booting.
(8) RS 485
- 1 Serial Communication for Pan / Tilt Camera
(9) Alarm/Sensor
- Alarm / 4 Sensor input / 1 output port
(10) AC Power
- 110~240 Vac
Intelligent Security & Fire
15
Quantum Evolution installation and user manual
SYSTEM CONNECTION DIAGRAM
< 4Channel Quantum >
< 8/16 Channel Quantum >
Intelligent Security & Fire
16
Quantum Evolution installation and user manual
REMOTE CONTROL (Not included with 4 Chn Non DVD units)
1. Power: Power ON/OFF
2. Rec: Start & Stop Recording
3.ⓞ~⑨: Key for figure and character
4. P/T/Z: Entering PTZ menu directly
5. OSD: Operating OSD ON/OFF
6. SEQ: Key for SEQ operation
7. LOG: Direct access Log list
8. INFO: Direct access system Info.
9. ID: Reserved.
10. MUTE: Audio Mute
11. AUDIO: Available audio switching when user select this key
12. MENU: Entering system menu
13. SEARCH: Entering search
14. ARROW & SPLIT: Key moving left, right, up and down. Also, Screen split display shows
15. VOL”+,-“ : Up, down volume
16. CH “+,-“ : Up, down channel(s)
17. ( ) : Play(or fast forward)
18. ◀ (◀ ) : Reverse play 19 II : Pause
20. █: Stopping playback
21. Cam: Changing PTZ icon
22. P/T: Pan &Tilt
23. Z/F: Zoom/ & Focus
24. DIS: Channel Division
21~24:doesn‟t work with Quantum Evo.
Intelligent Security & Fire
17
Quantum Evolution installation and user manual
OSD DESCRIPTION
Recording on
HD: 99%, this shows how much as a percentage is used on the Hard Disk Drive 04-11-2008 15:26:12: It shows the system date & time
This shows; “Power fail”, “USB stick in” “Network”. You would see other icons as well if happens such as
Intelligent Security & Fire
18
Quantum Evolution installation and user manual
MMEENNUU TTRREEEE
Menu tree
Display Set
Recording Set
System Set
Monitor Adjustment (4CH Only)
Camera Covert
Camera Name
OSD On/Off
Event Clear
Frame Rate
Recording
Setup Motion
(post motion/area/sensitivity)
P. Alarm Duration
Global Parameter
Normal Recording
Alarm Recording
Motion Recording
Schedule Recording
Audio
Basic
Disk Format
Password change
Client Account
Program Update
Main Menu
Repeat
Setup Schedule
Watermark
Date Format
Initialization
Date/Time/DST
Language
Recording Priority
Sensor
Information
Add New
Delete Account
Record
Save and exit
Client List
P.T.Z
Set Display
Save and exit
Camera Control
System ID
Auto Delete Mode
Intelligent Security & Fire
19
Quantum Evolution installation and user manual
Network Set
DDNS SET
IP SET
Date/Time Search
Calendar Search
Backup
Search
E-Mail
E-Mail Report
Notification Out
Event
Alarm Out
Beep
E-Mail
Log
DDNS DDNS User ID DDNS Password HOST Name
DDNS Status check
Save and Exit
Use Dynamic IP IP address Gate Way Net Mask DNS Server XDSL User ID XDSL Password DVR Port Web Server Port Save and Exit
F.F.: Exclusive / AVI
B.D.: CD-RW /
Intelligent Security & Fire
20
Quantum Evolution installation and user manual
DEFAULT PASSWORDS
Front Panel
Password is required if you need to enter the menus; down power; stop recording or changing an IP setting.
A prompt will be displayed asking for password. The default Password is: 00000000 (8 zeros)
Viewer Software
When using the supplied browser software the following password will be required.
User ID is “admin” (not case sensitive). Password is “00000000” i.e. 8x Zero‟s
(Admin ID cannot be changed, as this is the full administrator ID)
Intelligent Security & Fire
21
Quantum Evolution installation and user manual
MAIN MENU
To enter the set-up menu press the Menu button and enter the password (default password is 00000000 – 8 zeros). The following screen will be displayed.
Menu Navigation
All menus are navigated around using the left / Right / Up / Down and the SEL Select button. To step back through the menus press MENU button
DISPLAY
Camera Covert
Cameras can be hidden from the viewer in live or play back mode. Turn the camera on or off
using the left and right buttons around the SELECT button.
Camera Name
Each camera can be titled using the Alphanumeric buttons on the front panel.
OSD On/Off
OSD on/ off: Selecting whether the time and date etc is shown on the screen or not.
Intelligent Security & Fire
22
Quantum Evolution installation and user manual
Set Display Sequence
Within the FULL DISPLAY SEQUENCE an a switching sequence of all or a selection of cameras can be set, with individual times allocated to selected cameras.
Within the QUAD DISPLAY SEQUENCE a selection of screens displaying 4 cameras at a time can be set-up, the quad displays are fixed e.g. Quad 1 contains cameras 1,2,3 and 4; Quad 2 contains cameras 5,6,7 and 8 etc
Use the START options to start the sequences running. To stop them simply select a single camera from the front panel.
Event Clear
This is used to erase the list, in the memory, of previous events such as alarm activations.
Intelligent Security & Fire
23
Quantum Evolution installation and user manual
Camera Control
The picture displayed from each camera can be individually adjusted to balance the multi screen view.
Intelligent Security & Fire
24
Quantum Evolution installation and user manual
RECORDING
Global Parameter
Within this section:
1. The 4 audio tracks can be switched on or off, Note Audio tracks 1, 2,3and 4 are linked to channels 1,2,3,and 4. (only one audio track on 4 channel unit)
2. Repeat recording can be set to continually overwrite or stop when the drives are full.
3. Watermarking should be set to on, this allows the supplied software to verify the downloaded information to ensure it has not been tampered with or changed.
4. Recording resolution can be set to 2CIF -720 X 288 (giving 50ips recording) or CIF - 360 X 288 (100ips).
These settings are applied to all channels
Intelligent Security & Fire
25
Quantum Evolution installation and user manual
Normal Recording
The frame rates can be set individually per camera, the number of frames available is dependant on the resolution set (within GLOBAL PARAMETERS) e.g. 720X288 allows 50ips across the cameras, and 360X288 allows 100ips across the cameras. On the 8 and 16 channel units go the PAGE 1 and use “ ” arrow to move to access further channels
Recording Quality
Three levels of compression: High, Mid, Low. Can be set per channel.
Save and Exit
All the values set-up will be stored and screen will step back to higher level menu..
Intelligent Security & Fire
26
Quantum Evolution installation and user manual
Alarm Recording
There are 4 Alarm inputs on the rear of the Quantum these can be used to initiate the Alarm record mode.
Setup Alarm
Using the following screen, the individual alarm inputs can be configured to activate recording on any of the 16 cameras
Post Alarm Duration
After alarm activates, it sets how long the recording continues. The value is selectable among: 5/ 30/ 60/ 90/ 120/ 150/ 180/ 210/ 240 sec.
Frame rates
The frame rates can be set individually per camera, the number of frames available is dependant on the resolution set (within GLOBAL PARAMETERS) e.g. 720X288
Intelligent Security & Fire
Loading...
+ 60 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use