How it Works
Vista
Loading...
MiniD400

Vista MiniD400 Installation & User Manual

Vista MiniD400
Installation & User’s Manual
2
Before Y ou Begin
Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should conform to local codes.
This manual provides installation and operation information. To use this document, you must have the following minimum qualifications:
y A basic knowledge of CCTV systems and components y A basic knowledge of electrical wiring and low-voltage electrical connections
Intended use
Only use this product for its designated purpose; refer to the product specification and user documentation.
Customer Support
For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any other documentation provided. If you still have questions, please contact Norbain Technical Support and Sales:
210 Wharfedale Road Winnersh Triangle, Wokingham, Berks RG41 5TP
0118-912-5000
Note: You should be at the equipment and rea dy with details before calling Technical Support.
Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CA UTION and Note statements identify potential hazards that can occur if the
equipment is not handled properly:
*
WARNING:
Improper use of this equipment can cause severe bodily injury or equipment damage.
** Caution:
Improper use of this equipment can cause equipment damage.
Note:
Notes contain important information about a product or procedure.
RoHS Announcement All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and without the hazardous substances cited in the directive.
CE Mark This apparatus is manufactured to comply with the radio interference. European representative for manu fact ure ( EMC): Norbai n Ltd., 210 Wharfedale Road, Winnersh Triangle, WOKINGHAM. Berks. RG41 5TP, UK.
* This symbol indicates electrical warnings and cautions. ** This symbol indicates general warnings and cautions.
NORBAIN SD LTD reserves the right to make changes to the product and specification of the product from time to time without prior notice.
WARNINGS AND CAUTIONS
To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other openings on the equipment.
CAUTION
24VAC Type Model: Use Certified/Listed Class 2 power supply transformer only.
Equipment Disposal: Within in the European Union products marked with the WEEE logo cannot be disposed of as unsorted municipal waste. Upon the purchase of equivalent new equipment return this product to your local supplier or dispose of it at designated collection points. For more information please visit www.recyclethis.info
or http://www.vista-cctv.com/weee/
3
PRECAUTIONS
Safety-----------------------------------------
Should any liquid or solid object fall into the MiniD400, unplug the unit and have it checked by a qualified person before operating again.
Unplug the unit from the wall outlet if it is not going to be used for several days. To disconnect the cord, pull it out by the plug, never by the cord itself.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.)
The height and linearity controls located at the rear panel are for adjustments by qualifies personnel only.
Installation----------------------------------------
Do not install the unit in extremely hot or humid environments or places exposed to excessive dust or mechanical vibrations.
Cleaning------------------------------------------- Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzene as they might damage the finish of the unit.
4
TABLE OF CONTENTS
Chapter 1: Packing Contents
CONTENTS IN THE PACKAGE
6
Chapter 2: Getting To Know Your MiniD400
MiniD400 7
Chapter 3: Remote control
REMOTE CONTROL PANEL 9
Chapter 4: Getting Started
OVERVIEW OF SET UP PROCEDURES 11
Chapter 5: Hardware Installation
SD MEMORY INSTALLATION 12
CONNECTING MiniD400 TO YOUR TV SET OR MONITOR 13
ALARM INSTALLATION 14
Chapter 6: OSD MODE
1. ACCESS TO OSD MENU 15
2. MAIN MENU 15
3. SYSTEM SETUP
3.1 TIME SET > DAY LIGHT SAVING
3.2 LANGUAGE SETUP
3.3 VIDEO OUTPUT
3.4 BRIGHTNESS:
16
4. VIDEO SETUP
4.1 RESOLUTION
4.2 VIDEO QUALITY
4.3 FRAME RATE
4.4 PRE RECORDING TIME
4.5 POST RECORDING TIME
4.6 AUDIO RECORDING
4.7 DISK OVERWRITE
17
5
5. EVENT SETUP
5.1 ALARM SETUP
5.1.1 ALARM INPUT
5.1.2 INPUT TYPE
5.1.3 ALARM OUTPUT
5.2 MOTION DETECTION
5.2.1 SENSITIVIITY
5.3 SCHEDULE SETUP
19
6. SUB MENU
6.1 PASSWORD CHANGE
6.2 FILE INDEX RENEW
20
Chapter 7: SCREEN MODE
1. LIVE SCREEN MODE
1.1 SCREEN MESSAGE
1.2 SCREEN ICON
21
2. SEARCH LIST
2.1 SEARCH FACTOR
22
Appendix:
TECHNICAL SPECIFICATIONS
24
RECORDING TIME TABLE
26
6
Chapter 1: Packing Contents
▶ Contents in the package
MiniD400 Main Unit Remote Controller AV-IN / AV-OUT Connector
Terminal Block 12V Power Supply Installation CD
Quick Guide 1GB SD Card Supplied, 8GB
Maximum allowed
SD Reader (Option)
7
Chapter 2: Getting To Know Your MiniD-400
This chapter briefly describes the functions of each button on MiniD400. The buttons are used to operate the basic functions of MiniD400, such as recording, playback, fast-forward, reverse play and etc. For more details on the set-up and operation of MiniD400, refer to Chapter 6, MiniD400 MENU.
①
⑧
⑨
⑩
8
1 Sensor-in / Alarm-out
The sensor terminal block is used to connect a sensor such as PIR to the MiniD400. This will trigger the device to event record. The alarm output terminal is used to install a single alarm device.
2 SD Memory Slot
Insert SD Card into the slot for storing data.
3 Recording LED
This light illuminates when the MiniD400 is recording.
4 Status LED
This light blinks when events have occurred or there is an error.
5 Power LED
This light illuminates when the MiniD400 is powered up.
6 Remote control Receiver
When controlling MiniD400 by remote control, be sure to point at the receiver.
7 Reset
Press the reset button if you want to return setting values to the default.
8 AV-IN
Connect AV-IN connector
9 AV-OUT
Connect AV-OUT connector
10 Power
Connect 12V power supply in the package.
9
Chapter 3: Remote control
1
REC
Starts and stops MiniD400 recording. Turn the SD power off when pressing the REC button for 3 seconds. (Recording can resume after 20 seconds)
2
MENU
Enter OSD menu. On OSD menu, go to the upper menu.
3
UP/ DOWN
On OSD menu, chooses menu fields and change values. On search mode, play the previous or next recorded file.
4
LEFT/ RIGHT
REW: Fast Rewind (X2-X4-X8-X16) FF: Fast Forward (X2-X4-X8-X16)
5
REW
REW: Fast Rewind (X2-X4-X8-X16)
6
FF FF: Fast Forward (X2-X4-X8-X16)
7
PLAY
Playback at X1
8
STOP
Stop recording or playback. In playback mode, go back to the first frame.
9
PAU S E
Pause playback or resume playback.
10
MUTE
Remove audio.
11
ENT
On playback mode, playback at X1. On OSD menu, enter values.
12
SEARCH
Enter Search menu. On search menu, move to upper search menu.
13
MODE
Switch between playback mode and live view mode.
Loading...
+ 18 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use