Vista VVRD4V9DN, 1/3"" EX-VIEW CCD COLOR CAMERA Installation Instructions Manual

Installation & Instruction Manual

VISTA VANDAL RESISTANT

DAY & NIGHT DOME CAMERA

1/3" EX-VIEW CCD COLOR CAMERA

Please read this manual thoroughly before use, and keep it handy for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO N OT INSE RT
ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS

OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

CAUTIONCAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shoc k to per sons .

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

FCC COMPLIANCE STATEMENT

INFORMATION TO THE USER : THIS EQUIPMENT HAS BEEN

TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A
CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES,
USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF
NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION
OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO
CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER
WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.

NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING :

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT
THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH
CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE
MEASURES.

IMPORTANT SAFEGUARDS

1.

READ INSTRUCTIONS -- All the safety and operating instructions should be read before the
appliance is operated.

2.

RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for
future reference.

3.

CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.

ATTACHMENTS -- Do not use attachments not recommended by the video monitor or
equipment manufacturer as they may result in the risk of fire, electric shock or injury to
persons.

5.

WATER AND MOISTURE -- Do not use video monitor or equipment near water -- for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, or the like.

6.

ACCESSORIES -- Do not place video monitor or equipment on an unstable cart, stand or
table. The video monitor or equipment may fall, causing serious injury to a child or adult, and
serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's
instructions, and should use a mounting kit approved by the manufacturer.

6A.

Video monitor or equipment and cart combinations should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.

VENTILATION -- Slots and openings in the cabinet and the back or bottom are provided for

7.
ventilation, and to ensure reliable operation of the video monitor or equipment and to protect

it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the video monitor or equipment on a bed, sofa, rug, or other
similar surface. Video monitor or equipment should never be placed near or over a radiator or
heat register. Video monitor or equipment receiver should not be placed in a built-in
installation such as a bookcase unless proper ventilation is provided.

8.
POWER SOURCES -- Video monitor or equipment should be operated only from the type of

power source indicated on the marking label. If you are not sure of the type of power supplied
to your home, consult your video monitor or equipment dealer or local power company. For
video monitor or equipment designed to operate from battery power refer to the operating
instructions.

GROUNDING OR POLARIZATION -- This video monitor may be equipped with a polarized

9.
alternating - current line plug (a plug having one blade wider than the other). This plug will fit
into the power outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.

Alternate Warnings - This video monitor is equipped with a three-wire grounding-type plug, a
plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.

IMPORTANT SAFEGUARDS

10.

POWER CORDS -- Do not allow anything to rest on the power cord. Do not locate
video monitor or equipment where the cord will be abused by persons walking on it.

11.

HEED WARNINGS -- Follow all instructions marked on the video monitor or equi pmen t.

12.

LIGHTNING -- For added protection for video monitor or equipment during a lightning
storm, or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent damage to
the video product due to lightning and power-line surges.

OVERLOADING --Do not overload outlets and extension cords as this can result in a

13.
risk of fire or electric shock.

OBJECT AND LIQUID ENTRY -- Never push objects of any kind into video monitor or

14.
equipment through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind o n the
product.

SERVICING -- Do not attempt to service video monitor or equipment yourself as

15.
opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

DAMAGE REQUIRING SERVICE -- Unplug video monitor or equipment from the wall

16.
outlet and refer servicing to qualified service personnel under the following cond itio ns:

A. When the power-supply cord or the plug has been damaged.
B. If liquid has spilled, or objects have fallen into the video product.
C. If the video product has been exposed to rain or water.
D. If the video product does not operate normally by following the ope rat ing
instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician
to restore the video product to its normal operation.
E. If the video product has been dropped, or the cabinet damaged.
F. When the video product exhibits a distinct change in performance -­ this indicates a need for service.

REPLACEMENT PARTS -- When replacement parts are required, be sure the service

17.
technician has used replacement parts specified by the manufacturer or that have the
same characteristics as the original part. Unauthorized substitutions may result in f ire,
electric shock or other hazards.

SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask

18.
the service technician to perform safety checks to determine that the video product is i n

proper operating condition.

FIELD INSTALLATION -- This installation should be made by a qualified service person

19.
and should conform to all local codes.

INTRODUCTION

The 1/3" DSP color security camera provides SONY, true-color images especially
for closed-circuit television (CCTV) and security surveillance applications.

FEATURES:

High-performance 1/3" SONY DSP color Exview HAD CCD technology

NTSC: 330 lines(Color), 380 lines(B/W) of resolution(Standard)
480 lines(Color), 530 lines(B/W) of resolution(High)

PAL: 320 lines(Color), 360 lines(B/W) of resolution(Standard)
470 lines(Color), 510 lines(B/W) of resolution(High)

0.3lux(Color), 0.02lux(B/W), F1.2 Sensitivity(Standard)

0.5lux(Color), 0.04lux(B/W), F1.2 Sensitivity(High)

Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter
modes

1/3" CCD Colo(u)r Image Sensor:
This is a professional level camera chip which achieves a very high quality
picture.

Angle 4-9mm Vari-focal Lens, 4-9mm DC Auto Iris Lens, 12mm DC Auto Iris Lens:
Allows a large area to be monitored from a single camera.

Flicker less, BLC, D/N Conversion(Color/BW), AGC, D&N(Auto/Manual), Sync
adjustments

12VDC or 24VAC

Unpack and identify the following parts from the shipping container:

A. Camera B. Mounting Screw C. Instruction manual

Note : The user of this system is responsible for checking and
complying with local, state and federal laws and statutes
concerning the recording and monitoring of audio signals.

- 1 -