Visonic TOWER-32AM-PG2 Specsheet
TOWER-32AM PG2
PowerG, Wireless, Dual, Mirror
Detector with Anti-mask
Features that Make a
Difference:
•Dual PIR and K-band microwave
technologies dramatically reduce
false alarms and decrease
associated operational costs
•Ideal for commercial and harsh
residential installations
•Unprecedented, active antimasking (AM) protection
technology for both the PIR
and microwave sensors
•Disguise mode detects intruders
even in extreme temperature
conditions
•Complies with EN 50131-2-2
Grade 3 Standard
•Compatible with PowerMaster
systems
•Uses revolutionary PowerG
technology to deliver outstanding
reliability, robustness and efficiency
Outstanding Detection Reliability in
Commercial and Harsh Residential
Environments
The TOWER-32AM PG2 dual
technology detector combines
advanced PIR detection algorithms
with K-band microwave detection
to dramatically reduce false alarms
events even in harsh residential
and commercial installations. The
unique anti-disguise mode increases
detection reliability by detecting an
intruder who manipulates his body
temperature to be very close to the
ambient temperature.
The TOWER-32AM PG2 unique
Anti-mask features further enhance
security with protection against
attempts to mask either the PIR or
the microwave sensors.
Using the mirror detection
technology of Visonic’s TOWER
family combined with Visonic’s
PowerG full, two-way, wireless
technology, the TOWER-32AM
PG2 detector provides unmatched
reliability, robustness to interferences
and effortless installation.
•Vandal-resistant design – Enabled
by patented V-Slot technology
•Pet-tolerant model – Immune to
animals up to 18kg (40lb)
www.visonic.com
Advanced Detection Technologies
•Dual technology: PIR and microwave – An alarm
signal is sent only after both the PIR and K-band
microwave sensors have detected an intruder. This
significantly reduces false alarms, saving associated
costs for both the end-user and installer.
•Combination elliptical-parabolic mirror optics –
An innovative mirror with extremely high optical gain
delivers an extended range and provides superior
detection sensitivity.
•Digital temperature compensation – The detection
sensitivity continuously adjusts according to the ambient
temperature. It improves the detection of intruders even
when the ambient temperature is close to human body
temperature.
• Anti-disguise mode – This mode is used when an
intruder tries to disguise himself by manipulating his body
temperature to be close to the ambient temperature.
A unique detection algorithm and increased microwave
sensitivity together improve detection sensitivity and
reduce the likelihood of a false alarm.
•Obsidian Black Mirror technology – Unique, nickel-
based, obsidian-like, reflective surface acts as a
selective optical filter of infrared energy. It virtually
eliminates white light interference and increases
detection sensitivity.
•Extended detection area – Unique optics enable
extended 15m/90˚ range. It provides wall creep zone
coverage with no dead spots. The pet-tolerant model
prevents false alarms caused by house pets.
•Front and back tamper – An alarm is activated if an
intruder tries to open the TOWER-32AM PG2 cover or
remove the detector from the wall.
•V-Slot technology – This revolutionary, exceptionally
small and recessed slot window is extremely strong
and well protected against mechanical damage and
vandalism.
•Installer-friendly
•Built-in link status LED – The RF link quality is clearly
displayed with a built-in LED, enabling selection of the
optimal installation location with no need to physically
approach the control panel.
•Remote configuration – All parameters can be pre-
enrolled and configured from the panel or from the
central station without hardware switches or the need to
re-open the detector.
•Remote maintenance – The TOWER-32AM PG2 can
be accessed from a central monitoring station, enabling
remote diagnostics and activation of walk tests. This
saves truck rolls to customer sites.
•Prolonged battery life – Based on the very low power
consumption of PowerG technology.
Specifications
Operating frequencies ....433-434, 868-869, 912-919MHz
Coverage.............15m (50ft) / 90° with creep zone
Battery type.............3V lithium CR-123A or 17450
Battery life .................Five years with typical use
Unmatched Reliability
and Robustness
•Dual anti-masking – With an advanced anti-masking
mechanism, the TOWER-32AM PG2 issues alerts upon
any attempt to mask the PIR or the microwave sensors.
•Frequency hopping – Able to hop between frequency
bands, the TOWER-32AM PG2 is resistant to almost
any radio frequency interference. It also enables long
distance communication with the panel even in harsh
security environments.
•Unprecedented, anti-masking protection – Based on
Visonic’s active IR transmitter and receiver anti-masking
technology, TOWER-32AM PG2 sends IR signals which
are reflected back from the surrounding area into the
receiver. Any attempt to mask these signals using
blocking devices or a spray will activate an alert.
Mounting height . . . . . . . . . . . . . . . . . . . . 1.8-3m (6-10ft)
RF/Radio technology. . . . . . . . . . . . . . . . . . . . . . .PowerG
Microwave frequency. . . . . . . . . . . . . . . . . . . . . . . K-band
Anti-masking . . . . . . . . . . . . . . . . . Active dual mechanism
Dimensions ........115 x 60 x 48mm (4.5 x 2.3 x 1.1in)
Operating temperature . . . . . -10° to 50°C (14° to 122°F)
Tamper protection . . . . . . . . . . . . . . Front cover and back
Compliance . . . .EN 50131-2-2 (Europe) Grade 3, Class II
CFR 47 Part 15, FCC (USA), IC Canada
Optional accessories . . . .Wall, corner and ceiling brackets
(BR-1, BR-2, BR-3)
Approvals
www.visonic.com
Contact Visonic for further information:
@
Email: info
Tel: +972 3 6456789
Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.
© 2013 Visonic Ltd. All rights reserved. CUSD TOWER-32AM PG2 DATA SHEET ENG C-800967 (Rev.01)
visonic.com
Loading...