Visonic RP-600 PG2 Specsheet
RP-600 PG2
RP-600 PG2 extends the communi-
PowerG® Wireless Repeater
PowerG® two-way Frequency Hopping
•
Spread Spectrum FHSS-TDMA technology provides robustness and reliability closer
than ever to wired
Extends the communication range between
•
the PowerMaster
PowerG transmitters
Transmission range is by far greater than
•
the industry standard
Visible link quality indication shown on the
•
device
Mains powered, with rechargeable 48-hour
•
backup battery
Compact and easy to install
•
®
systems and other
cation range between PowerMaster
alarm systems and other PowerG
transmitters. It receives alarm, status
and control messages from the wireless
devices, and sends these messages to
the control panel.
Specications:
Power supply: 230VAC, 50Hz/9VAC,
0.35A min
120VAC, 60Hz/9VAC,
0.35A min (USA)
Back-up battery type: 4.8V, 1300mAh
Battery back-up: 48 hours (rechargeable)
Weight
(including battery):
Operating
temperature:
Operating
environment:
Dimensions: 161 x 161 x 50mm
470g (16.5oz)
0°C to 49°C
(32°F to 120°F)
Indoor
(6.44 x 6.44 x 1.75in)
Front and back tamper protected
•
LED indications for power failure, activity
•
and installation performance diagnostics
Compatible with PowerMaster systems and
•
PowerG receivers
of their owners. Visonic reserves the right to change information or specications without notice.
, PowerG and PowerMaster are registered trademarks of Visonic Ltd. Other names are the property
Certications:
Loading...