VisionQuest PVQ42VGB User Manual

1

PLASMA TV

USER MANUAL

Please READ this manual carefully before

operating your TV, and retain it for future

reference.

MODEL :PVQ42VGB

2

WARNING : To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside refer service to qualified service personnel.

Operator Safety has been taken into consideration at the design and manufacture phase, but inappropriate
operation may cause electric shock or fire. To prevent the product from being damaged, the following rules
should be observed for the installation, use and maintenance of the product. Read the following safety
instruction before starting the operation.
The User Manual uses the following symbols to ensure a safe operation and prevent any damage to
operators’ r properties:

WARNING

RISK ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS IN THE LITERATUR
ACCOMPANYING THE APPLIANCE.

CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003.

3

IMPORTANT SAFETY INSTRUCTIONS

Read all of the instructions before using this appliance. When using this
appliance, always exercise basic safety precautions, including the following:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer`s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of

time.

14) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

15) WARNING-to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.

The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.

The mains plug is used as the disconnect device, remain it readily operable during the
apparatus normal use.

4

SAVE THESE INSTRUCTIONS

Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use
of your product. Remember to record the model and serial number. They are on label in back of the unit.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain warranty service.

5

Contents

Warning…………………………….. …………………………....……………….……………....……………………………..…………2

Important Safety Instructions ……………………………..……………………...………..…………………………….. ………………3
Save These Instructions…………………………….. …………………………..….. …………………………………………….. ……4
Controls …………………………….. …………………………….. …………….……………………………….. ………………………5
Connection Options…………………………….. ……………………………….……………………………….. ………………………7
Universal Remote Control…………………………….. ………………………………………………………….. …………………….8
Accessories…………………………….. ………………………………………………………….. …………………………………….9
Antenna Connection…………………………….. ………………………………………………………….. ………………………….10
External Equipment Connections…………………………….. ………………………………………………………….. ……………11
Operation………………….. …………………………….. ………………………………………………………….. …………….……17
Menu Operation…………………………….. ………………………………………………………….. ……………………………….18

Maintenance………………………….. ……………………...…………………………………….. ……………………………………30

Cleaning the screen…………………………….. ………………………………………………………….……………………………30
Cleaning the Cabinet……………..…………….. ………………………………………………………….……………………………30
Extended absence………………………….………………………………………………….……………………………………….…30
Product specification………………………….………………………………...……………………….………………………………..31

6

Controls

This is a simplified representation of front panel.
Here shown may be somewhat different from your TV.

Front panel controls

1

INPUT: Press to show the input source mode. In the MENU/INPUT

screen, these buttons serve as ENTER buttons.

2 MENU: Menu display.

3 CH-/+ : Press to scan through channels. To scan quickly through

channels, press and hold down either +/- . In the MENU
screen, these buttons serve as Ÿ/ź buttons.

4 VOL -/+ : Press to adjust the volume .In the MENUscreen, these

buttons serve as Ż/Ź buttons.

5 POWER: Press to turn on and off the TV.

7

Connection options

Back panel controls

1 YPbPr 1-Left Audio In 11 YPbPr 2-Y in
2 YPbPr 2-Left Audio In 12 YPbPr 2-Pb In
3 CVBS & S-Video Left Audio In 13 YPbPr 2- Pr In
4 YPbPr 1-Y in 14 PC- Audio In
5 YPbPr 1-Pb In 15 PC-RGB In
6 YPbPr 1- Pr In 16 HDMI 1 In
7 CVBS In 17 HDMI 2 In
8 YPbPr 1-Right Audio In 18 S-Video In
9 YPbPr 2-Right Audio In 19 Coaxial output terminal

10 CVBS & S-Video Right Audio In 20 TV signal In

1 3 4 5 762

8 12 13 16 17 18 19 20 14 159 10 11

8

Universal Remote Control

The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote control sensor on the TV.

Fonctions introduction

1 POWER

Press toturn on and off the TV

2 MUTE

Switches the sound on or off.

3 Numeric buttons

Press to change the channel.

4 - Button

Press to select additional channels (digital) being broadcast by
the same station. For example, to select channel “54-3”, press
“54”, then press “-” and “3”.

5

Tv mode recall

6 MTS

Mono”,”Stereo”and “Sap”.

7.VOLUME UP/DOWN

Press to adjust the volume.

8 CC(closed caption)

Select a closed caption.

9CHANNEL UP/DOWN

Press to scan through channels. To scan quickly through
channels, press and hold down either +/- .

10 Display

Display present mode

11,16 Ÿ/ź
UP/DOWN
14,13Ż/Ź
RIGHT/LEFT
15 EXIT

Clears all on-screen displays and returns to TV viewing from any
MENU

17 MENU

Brings up the main menu to the screen.

18 PMODE

Selects the picture mode appropriate for the program's character.

19 INPUT

Show the input source mode.

20 FAV

Favorite television programs

21 ZOOM
The zoom mode settings can be alse in the screen setting
22 EPG

Electronic program guide

24 SMODE

Selects the sound mode appropriate for the program's character.

25 SLEEP

Displays the Sleep Timer option.

26 ,27 FAV+/-

Favorite television programs up/down

28 NC : No use buttoms.

9

Accessories

Remote control User manual Power cable

Attention Card Quick Start Guide(English Version) Quick Start Guide(French Version)

10

Antenna Connection

Generally speaking, to enjoy a clearer picture,we recommand that you use a CATV system or an
outdoor antenna. Over-the-air TV reception quality will depend on your antenna type,antenna location
and antenna positioning.

Connexions de l'équipement externe
Quick set-up

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket

Bronze Wire

RF Coaxial Wire (75

VHF Antenna
UHF Antenna

Single-family Dwellings /Houses
(Connect to wall jack for outdoor
antenna)
Outdoor Antenna

Turn clockwise to tighten

Bronze Wire

Be careful not to bend the
bronze wire

gTo improve the picture quality in a poor signal

area, please purchase a signal amplifier and install
properly.

gIf the antenna needs to be split for two TV’s, install

a 2-Way Signal Splitter in the connections.

gTo install the antenna properly please contact a

professional in your area.