Visionis VIS-7001 Installation Manual
Technology Within Your Reach
Indoor + Outdoor Weather and Waterproof
Rated IP65 Stainless Steel Door Bell Type
Round Request To Exit Button Standard Size
For Door Access Control With LED Light +
NC COM and NO Outputs
INSTALLATION MANUAL
ref.
VIS-7001
Rear ViewFront View
115mm
(4.52in.)
Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
83mm
(3.26in.)
70mm (2.75in.)
19mm
(0.74in.)
40mm
(1.57in.)
sales@visionistech.com
www.visionistech.com
19mm
(0.74in.)
Indoor + Outdoor Weather and Waterproof
Rated IP65 Stainless Steel Door Bell Type
Round Request To Exit Button Standard Size
For Door Access Control With LED Light +
Technology Within Your Reach
NC COM and NO Outputs
Exit Button Wiring Diagram
Green (1): COM
Green (2): COM
White: NC
Yellow: NO
Red: +12VDC
Black: -GND
ref.
VIS-7001
(1) Push-button dry contact rating: 250VAC 5A. For safe operations, do not exceed the ratings
above.
(2) For normally open requirements, connect wires to N.O dry contact of PUSH-BUTTON.
(3) For normally closed requirements, connect wire to N.C dry contact of PUSH-BUTTON.
(4) LED Supply Voltage POWER ：DC-12V.
Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
sales@visionistech.com
www.visionistech.com
Loading...