Visionhitech VQ29SFHD2, Full HD Mini Square Camera Installation Manual

Full HD Mini Square Camera
QUICK INSTALLATION GUIDE
Special features
Uncompressed high quality Full HD video with full frame rate 4.3mm Board Lens
Pinhole lens : 4.3mm
HD video transmission up to 100M 1920 x 1080 25p / 30p, 1280 x 720 50p / 60p Quick and easy OSD control Enhanced WDR performance 2D / 3D DNR (Digital Noise Reduction) Defog function Dynamic digital zoom and PIP Integral cable OSD key Supports 15 Languages 12VDC
Dear Customers!
By selecting this product, you have decided to use a professional device that guarantees highest quality and reliability. We would like to thank you very much for your confidence and kindly ask you to read the following instructions carefully before installation and operation in order to take full advantage of all quality features regarding this product.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
CAUTION – To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified. Do NOT expose this appliance to rain or moisture.
1. Precautions
Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
Please keep the manual in good condition for your future reference and service
application.
Installation and services should be only carried out by an authorized personnel
according to local safety regulations.
If any liquid or solid matter gets into the housing, immediately disconnect the camera
from power supply and have it checked by your authorized dealer before reusing.
Avoid installing the camera at extremely hot or cold places. If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts inside that need maintenance by the user. All maintenance should be carried out by qualified personnel.
Avoid installing the camera at a place of high humidity. Avoid installing the camera at the place exposed to gas or oil. Keep the top glass of the lens always clean in order to obtain the best picture quality
all the time. Be careful not to be stained by fingerprint.
Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
Please give a special attention to keep the unit from dangerous drop or external shock
during the process of transportation or handling.
Never try to touch the camera in wet hand. It may cause an electric shock. Do not expose the camera to radioactivity. It causes a serious damage on the sensor.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for any particular purpose, or non-infringement of the third party's right. This publication could include technical inaccuracies or typographical errors. Changes are added to the information herein, at any time, for the improvements of this publication and / or the corresponding product(s).
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for replacement or reasonable maintenance of the product, for the cases, including but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent operation of
the user; (3) Unauthorized disassemble, repair or modification of the product by the user; (4) Inconvenience or any loss arising when images are not displayed, due to any reason
or cause including any failure or problem of the product; (5) Any problem, consequential inconvenience, or loss or damage, arising out of the
system combined by the devices of third party. (6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that surveillance-
camera's picture, including saved data, for some reason, becomes public or is used
for the purpose other than surveillance.
4. Package
5. Cable connection
5-1. How to mount to ceiling / wall
- Standard_DIY Cable : 4f (1.2M)
The lighting flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.
This installation should be made by a qualified service person and should conform to
all local codes.
Camera x 1
Installation
guide x 1
Bracket x 1
Mounting screws x 2
Cable x 1
Tapping screws x 2
5. Cable connection
- OSD Key
< NOTE : > For detailed information regarding OSD menu options, refer to the guide of the OSD Manual.
6. Installation
- Adjustment of Bracket
7. Troubleshooting
If there are problems in operating, please refer to the checklist below. If the problem persists, please contact the agent where this product is purchased.
Problems
Troubleshooting
Nothing appears on the screen.
Please check that the power cord and line connection between the
camera and the monitor are fixed properly.
Please check that you have properly connected VIDEO cable to
the camera VIDEO output jack.
The image on the screen is dim.
Is lens stained with dirt? Clean your lens with soft, clean cloth. Set the monitor to proper condition.
The image on the screen is dark.
Adjust the contrast feature of the monitor. If there is an intermediate device, set the 75Ω / Hi-Z properly.
The camera is not working properly, and the surface of the camera is hot.
Please check that you have properly connected the camera to an
appropriate power source.
Color is not correct.
Please check the setting of White AWB menu.
The screen flickers continually.
Please check that direction of camera turns toward the Sun.
7. Dimension (mm)
8. Specifications
MODEL
Full HD Mini Square Camera
Sensor Device
Sony 1/2.8 inch 2.1MP Exmor CMOS Sensor
Total Pixels
1952(H) x 1116(V) 2.18 Megapixel
Effective Pixels
1944(H) x 1104(V) 2.14MP
Scanning System
Progressive Scan
Horizontal
More than 1100 TVL
S/N Ratio
More than 52dB
Min. Illumination
0.2 Lux (AGC On)
Shutter Speed
1/30s Default, (Long Exposure Mode, ~1Sec)
Video Output
1920 x 1080 @25p / 30P, 1280 x 720 @50p / 60P (Mode Select)
Video Output Format
1.5G/s, SDI Output
CVBS Output
1V p-p Composite. 75 Ohms
Digital Output
SDI Output
Day & Night
Digital Day & Night
Lens
4.3mm Lens (Option) Board Lens : 2.9mm / 3.7mm / 6mm Mini Varifocal Lens : 3 ~ 6mm Pinhole lens : 4.3mm
Lens Control
Auto
IR Distance
Non-IR
Power Source
DC12V Only
Operating Current
150mA
Operating Temperature
-10°C ~ 50°C
Storage Temperature
-20°C ~ 60°C
Operating Humidity
(Humidity: 0%RH ~ 90%RH)
Measurement (mm)
Refer to dimensions
Weight ( Approx.)
150g
OSD
Video Mode / D&N / AWB / AE / Privacy Mask / Flicker less / Brightness / Sharpness / Mirror & Flip / DSS / DNR, etc.
* specifications are subject to change without prior notice for improvement.
Loading...