Vision Akkus CP1270D User manual
CP1270D
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid
electrolyte is absorbed by separators and plates and thus immobilized. Should the
12V 7Ah(20hr)
battery be accidentally overcharged producing hydrogen and oxygen, special oneway valves allow the gases to escape thus avoiding excessive pressure build-up.
Otherwise, the battery is completely sealed and is, therefore, maintenance-free,
leak proof and usable in any position.
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
General Features
Absorbent Glass Mat (AGM) technology
●
for efficient gas recombination of up to
99% and freedom from electrolyte
maintenance or water adding.
Not restricted for air transport-complies
●
with IATA/ICAO Special Provision A67.
UL-recognized component.
●
Can be mounted in any orientation.
●
Computer designed lead, calcium tin alloy
●
grid for high power density.
Long service life, float or cyclic
●
applications.
●
Maintenance-free operation.
●
Low self discharge.
Dimensions and Weight
Length(mm / inch) 151 / 5.94
Width(mm / inch) 65 / 2.56
Height(mm / inch) 93.5 / 3.68
Total Height(mm / inch) 100 / 3.94
Approx. Weight(Kg / lbs) 2.32 / 5.12
Performance Characteristics
Nominal Voltage 12V
Number of cell 6
Design Life 3~5 years
Nominal Capacity 77
o
F(25oC)
20 hour rate (0.35A, 10.5V) 7Ah
10 hour rate (0.65A, 10.5V) 6.5Ah
5 hour rate (1.10A, 10.5V) 5.5Ah
1 hour rate (4.42A, 9.6V) 4.42Ah
Internal Resistance
Fully Charged battery 77
o
F(25oC)
Self-Discharge
3% of capacity declined per month at 20oC(average)
Operating Temperature Range
Discharge
Charge
Storage
Max. Discharge Current 77
o
F(25oC)
Short Circuit Current 350A
o
Charge Methods: Constant Voltage Charge 77
Cycle use 14.5-14.9V
F(25oC)
28mOhms
o
-20~60
-10~60
-20~60
C
o
C
o
C
105A(5s)
Maximum charging current 2.8A
Temperature compensation
-30mV/
o
C
Standby use 13.6-13.8V
Temperature compensation
-20mV/
o
C
o
93.5±1
Discharge Constant Current (Amperes at 77
End Point
Volts/Cell
1.60V 27.6 17.4 14.0 8.10 4.42 1.74 1.23 0.68 0.363
1.65V 26.0 16.5 13.6 7.70 4.26 1.70 1.19 0.67 0.359
1.70V 24.5 15.7 13.0 7.42 4.08 1.64 1.14 0.66 0.355
1.75V 22.9 14.7 12.2 7.04 3.90 1.58 1.10 0.65 0.350
1.80V 21.3 13.8 11.6 6.83 3.70 1.53 1.05 0.64 0.344
Discharge Constant Power (Watts at 77oF25oC)
End Point
Volts/Cell
1.60V 48.0 33.1 26.5 14.2 11.0 8.91 4.98 3.58 2.32
1.65V 45.4 31.3 25.5 13.6 10.5 8.52 4.85 3.49 2.27
1.70V 42.9 29.6 24.4 13.0 10.0 8.16 4.71 3.39 2.24
1.75V 40.5 27.8 23.3 12.3 9.6 7.93 4.57 3.29 2.20
1.80V 38.6 26.0 22.3 11.9 9.25 7.54 4.42 3.18 2.14
(Note)The above characteristics data are average values obtained within
three charge/discharge cycles not the mimimum values.
5min 10min 15min 30min 1h 3h 5h 10h 20h
5min 10min 15min 30min 45min 1h 2h 3h 5h
page1 of 2
F25oC)
www.vision-batt.com
CP1270D
12V7Ah
Discharge characteristic (25 C)
O
Voltage(v)
Discharge time
Relationship between
charging voltage and temperature
15.6
C
y
15.0
14.4
Voltage(V)
13.8
13.2
-10 0 10 20 30 40 50 60
c e
l
Us
e
St
an
db
y Us
e
Ambient temperature( C)
o
Constant voltage charging
characteristic (0.25CA,25 C)
Voltage
(V)
Charged Volume
Charge Voltage
Charging Current
0 2 4 6 8 10 12 14 16 18 20
Charging time (hours)
140
120
100
Volume
Charged
Current
(%)
(XCA)
0.25
15.0
0.20
80
60
40
20
14.0
0.15
13.0
0.10
12.0
0.05
11.0
0
0
Self-discharge characteristic
110
100
90
80
70
Capacity(%)
60
50
40
o
C
o
C
o
C
0 2 4 6 8 10 12 14 16 18 20
Storage time: months
o
100% D.O.D
50% D.O.D
D.O.D
30%
Life characteristics of Standby use
120
100
80
60
Testing conditions:floating voltage:2.27 to 2.30V Cell
Capacity(%)
ambient temperature: 25C(77 F)
40
20
0
1 2 3
Temperature effects on float life
10
Life(year)
1
Life(years)
0.1
10 20 30 40 50 60
Temperature(C)
o
oo
2.30V Cell
Cycle service life in relation to
depth of discharge
100% D.O.D
Capacity(%)
50% D.O.D
Number of cycles(cycles)
Temperature effects on capacity
120
100
80
60
Capacity (%)
40
20
0
-20 -10 0 10 20 30 40 50( C)
0.0
0.1C
0
1.0
2.0
3
C
5
C
2
.
C
C
.0C
30%
D.O.D
o
THE INTERNATIONAL CERTIFICATION NETWORK
THE INTERNATIONAL CERTIFICATION NETWORK
ISO9001:2000
MH25860
Shenzhen Center Power Tech. Co., Ltd.
Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China
Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail: sales@vision-batt.com
Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2003-9)
G4M19906-9202-E-16
www.vision-batt.com
Page 2 of 2
Loading...