Vision VFM-DA2 User Manual

The Vision Flat-Panel Mount – Desk range is tough and flexible. The VFM-DA2 (desk arm) fits any flat-panel LCD
or LED screen which has 100 x 100mm rear mounting holes – most computer monitors.

Flat-Panel Desk Arm
100×100

VFM-DA2 EU SAP: 4291128 US SAP: 12939532

visionaudiovisual.com/vfm-da2

Double-articulated desk mount for flat panels up to 34″
Cable Management and adjustable dampers
Premium Aluminium construction

SWL 9 kg

The VFM-DA2 can support monitors up to 9 kg (20 lb).

Up to 34″

Fits screens that ranges from 10″ to 34″. If a larger display has the correct mounting
points and weighs less than the SWL this mount can support it safely.

Adjustable Dampers

To allow for different loads the dampers can be tightened or loosened to make sure the
display stays where it is when you let go of it.

Cable Management

Clip on covers allow tidy cable routing.

Clamp or Fix

The VFM-DA2 can be clamped or a fixing adaptor is included to bolt it to the table
(requires drilling hole in table).

Freedom of Movement

Almost endless tilt, rotation, swivel, and height adjustment puts the display right where
you need it.

Maximum Height

The maximum height from the desk top to the centre of the screens is 390 mm (15.3″).