Solid-Electrolyte TANTALEX® Capacitors,
+
+
+
+
Resin-Coated, Radial-Lead
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C, ± 20 %,
± 10 % standard. ± 5 % available as special
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
shall not exceed the values listed in the Standard Ratings
Tables.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
199D
Vishay Sprague
FEATURES
• Terminations: Tin/lead (SnPb), 100 % tin (Sn)
• Economy and high performance are combined
in these radial-lead, solid-electrolyte T
ANTALEX
capacitor
• Rugged, reliable capacitors featuring low
leakage current and low dissipation factor
• Six miniature case sizes and five lead styles. All case sizes
are available in standard tape and reel packaging per
EIA-RS-468
• Standard ratings include replacements for Type 196D
capacitors
• Lead (Pb)-free capacitors have “L” in body marking
APPLICATIONS
• Suitable for a broad range of consumer, commercial and
industrial equipment
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At + 125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 1000 h with a circuit resistance not
greater than 3 Ω.
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements
2. Dissipation Factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 10 %
®
RoHS*
COMPLIANT
Pb-free
Available
LEAD STYLE CONFIGURATIONS AND DIMENSIONS** (LL = Lead Length)
-
“LONG/SHORT” LL
1, 3 and Y
D
H
3 ± 1
P
(1) - WIRE DIAMETER (NOMINAL) 0.020" [0.51 mm]
L
EVEN LL
2, 4 and 5
D
H
L
P
“OUTSIDE HOCKEYSTICK”
6 and 7
D
+
+
H
1
L
P
1.1 ± 0.05
“SNAP
P
IN”
9
D
+
+
H
L
“HAIRPIN” X, Z
6.35 max.
D
H
L
P
AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE
LEAD
STYLE/CASE
A
B
C
D
E BulkV1Bulk/Reel
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 40020 For technical questions, contact: tantalum@vishay.com
Revision: 18-Mar-08 111
F
123 4 5679XYZ
Bulk
V1
Bulk
V1
Reel
B1
Ammo
A1
Ammo
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
www.vishay.com
H
1
Bulk
V1
Reel
B1
Ammo
A1
199D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Resin-Coated, Radial-Lead
DIMENSIONS in inches [millimeters]
LEAD STYLE 1, 2, 3, 4 1, 2, 3 2, 4 5, Y 6
CASE
A
B
C
D
E
F
D
max.
0.173
[4.40]
0.197
[5.00]
0.217
[5.50]
0.236
[6.00]
0.339
[8.60]
0.378
[9.60]
P
± 0.024
[0.60]
0.100
[2.54]
0.200
[5.08]
H
max.Lmin.
0.280
[7.11]
0.300
[7.62]
0.360
[9.14]
0.400
[10.16]
0.492
[12.50]
0.650
[16.50]
0.591
[15.0]
DIMENSIONS in inches [millimeters]
LEAD
STYLE
CASE
A
B
C
D
Note:
• Lead space measured within 0.05 [1.27] of the body of the capacitor or from the bottom of the crimp
7, 9 7 9 X, Z X Z
D
max.
0.173
[4.40]
0.197
[5.00]
0.217
[5.50]
0.236
[6.00]
P
± 0.024
[0.60]
0.25
[6.35]
H1
max.
0.378
[9.61]
0.398
[10.12]
0.458
[11.64]
0.498
[12.66]
L
± 0.03
[0.76]
0.240
[6.10]
± 0.118
[3.0]
0.748
[19.0]
P
± 0.024
[0.60]
0.200
[5.08]
L
H1
max.
0.398
[10.11]
0.418
[10.62]
0.478
[12.14]
0.518
[13.16]
P
± 0.03
[0.76]
0.125
[3.18]
--
--
L
± 0.03
[0.76]
0.240
[6.10]
L
± 0.118
[3.0]
0.748
[19.0]
D
max.Hmax.H1max.L± 0.125P± 0.024P± 0.024
0.173
[4.40]
0.197
[5.00]
0.217
[5.50]
0.236
[6.00]
± 0.024
[0.60]
0.200
[5.08]
0.280
[7.11]
0.300
[7.62]
0.360
[9.14]
0.400
[10.16]
P
0.340
[8.64]
0.360
[9.14]
0.420
[10.67]
0.460
[11.68]
H1
max.
0.378
[9.61]
0.398
[10.12]
0.458
[11.64]
0.498
[12.66]
0.591
[15.00]
0.748
[19.00]
[19.05]
0.750
L
0.240 ± 0.030
[6.1 ± 0.76]
1 ± 0.122
[25.4 ± 3.1]
0.100
[2.54]
0.125
[3.175]
ORDERING INFORMATION
199D 475 X9 003 A 1
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
Note:
(1)
see lead styles table
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40020
112 Revision: 18-Mar-08
X0 = ± 20
X9 = ± 10
** X5 = ± 5
** Special Order
DC VOLTAGE RATING
AT + 85 °C
%
This is expressed in V.
%
%
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
CASE CODE LEAD
See Ratings
and
Case Codes
table.
(1)
STYLE
V1 E3
PACKAGING RoHS
COMPLIANT
V1 = Bulk
B1 = Tape and reel
A1 = Ammo
E3 = 100 %
tin termination
(RoHS compliant)
Blank = Tin/lead
termination
199D
Solid-Electrolyte TANTALEX® Capacitors,
Resin-Coated, Radial-Lead
199D OBSOLETE VS. CURRENT ORDERING CROSS REFERENCE
OBSOLETE NEW DESCRIPTION
A1 1V1 0.100 SP, UNEVEN STRAIGHT LL, BULK CASES A - D
A1 3V1 0.200 SP, UNEVEN STRAIGHT LL, BULK, CASES E, F
A1 2V1 0.100 SP, EVEN STRAIGHT LL, BULK, CASES A - D
A6 2B1 0.100 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
A6 2A1 0.100 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
A1 4V1 0.200 SP, EVEN STRAIGHT LL, BULK, CASES E, F
A6 4B1 0.200 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES E, F
A6 4A1 0.200 SP, EVEN STRAIGHT LL, AMMO, CASES E, F
A2 5V1 0.125 SP, EVEN STRAIGHT LL, BULK, CASES A - D
A7 5B1 0.125 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
A7 5A1 0.125 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
Vishay Sprague
A2 YV1 0.125 SP, UNEVEN STRAIGHT LL, BULK, CASES A - D
B1 XV1 0.100 SP, HAIRPIN LL, BULK CASES A - D
B6 XB1 0.100 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
B6 XA1 0.100 SP, HAIRPIN LL, AMMO, CASES A - D
B2 ZV1 0.125 SP, HAIRPIN LL, BULK, CASES A - D
B7 ZB1 0.125 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
B7 ZA1 0.125 SP, HAIRPIN LL, AMMO, CASES A - D
E2 6V1 0.200 SP, HOCKEY STICK LL, BULK, CASES A - F
E7 6B1 0.200 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - F
E7 6A1 0.200 SP, HOCKEY STICK LL, AMMO, CASES A - F
E3 7V1 0.250 SP, HOCKEY STICK LL, BULK, CASES A - D
E8 7B1 0.250 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - D
E8 7A1 0.250 SP, HOCKEY STICK LL, AMMO, CASES A - D
E4 OBSOLETE
G2 9V1 0.200 SP, SNAP-IN LL, BULK, CASES A - D
G7 9B1 0.200 SP, SNAP-IN LL, REEL POSITIVE LEADER, CASES A - D
G7 9A1 0.200 SP, SNAP-IN LL, AMMO, CASES A - D
Document Number: 40020 For technical questions, contact: tantalum@vishay.com
Revision: 18-Mar-08 113
www.vishay.com
199D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Resin-Coated, Radial-Lead
STANDARD RATINGS
CAPACITANCE
(µF)
4.7 A 199D475(1)003A(2)(3) 0.5 6
6.8 A 199D685(1)003A(2)(3) 0.5 6
10.0 A 199D106(1)003A(2)(3) 0.5 8
15.0 A 199D156(1)003A(2)(3) 0.5 8
22.0 B 199D226(1)003B(2)(3) 0.6 8
33.0 B 199D336(1)003B(2)(3) 1.0 8
47.0 C 199D476(1)003C(2)(3) 1.4 8
68.0 C 199D686(1)003C(2)(3) 2.0 8
100.0 D 199D107(1)003D(2)(3) 3.0 10
150.0 D 199D157(1)003D(2)(3) 4.0 10
220.0 E 199D227(1)003E(2)(3) 5.0 10
330.0 E 199D337(1)003E(2)(3) 6.0 10
470.0 F 199D477(1)003F(2)(3) 8.0 10
680.0 F 199D687(1)003F(2)(3) 10.0 10
4.7 A 199D475(1)6R3A(2)(3) 0.5 6
6.8 A 199D685(1)6R3A(2)(3) 0.5 6
10.0 B 199D106(1)6R3B(2)(3) 0.6 8
15.0 B 199D156(1)6R3B(2)(3) 0.9 8
22.0 C 199D226(1)6R3C(2)(3) 1.3 8
33.0 C 199D336(1)6R3C(2)(3) 2.0 8
47.0 D 199D476(1)6R3D(2)(3) 2.9 8
68.0 D 199D686(1)6R3D(2)(3) 4.0 8
100.0 D 199D107(1)6R3D(2)(3) 5.0 10
150.0 E 199D157(1)6R3E(2)(3) 6.0 10
220.0 E 199D227(1)6R3E(2)(3) 7.0 10
330.0 F 199D337(1)6R3F(2)(3) 8.0 10
3.3 A 199D335(1)010A(2)(3) 0.5 6
4.7 A 199D475(1)010A(2)(3) 0.5 6
6.8 B 199D685(1)010B(2)(3) 0.6 6
10.0 B 199D106(1)010B(2)(3) 1.0 8
15.0 C 199D156(1)010C(2)(3) 1.5 8
22.0 C 199D226(1)010C(2)(3) 2.0 8
33.0 D 199D336(1)010D(2)(3) 3.0 8
39.0 D 199D339(1)010D(2)(3) 3.9 8
47.0 D 199D476(1)010D(2)(3) 4.0 8
68.0 D 199D686(1)010D(2)(3) 5.0 8
100.0 E 199D107(1)010E(2)(3) 6.0 10
150.0 E 199D157(1)010E(2)(3) 7.0 10
220.0 F 199D227(1)010F(2)(3) 8.0 10
2.2 A 199D225(1)016A(2)(3) 0.5 6
3.3 A 199D335(1)016A(2)(3) 0.5 6
4.7 B 199D475(1)016B(2)(3) 0.7 6
6.8 B 199D685(1)016B(2)(3) 1.0 6
10.0 C 199D106(1)016C(2)(3) 1.5 8
15.0 C 199D156(1)016C(2)(3) 2.4 8
22.0 D 199D226(1)016D(2)(3) 3.5 8
33.0 D 199D336(1)016D(2)(3) 4.0 8
47.0 E 199D476(1)016E(2)(3) 5.0 8
68.0 E 199D686(1)016E(2)(3) 6.0 8
100.0 F 199D107(1)016F(2)(3) 7.0 10
150.0 F 199D157(1)016F(2)(3) 8.0 10
Notes:
* (1) For capacitance tolerance: (X0 = ± 20 %), (X9 = ± 10 %) or (X5 = 5 %)
(2) To specify Lead Style/Spacing/Packaging insert the last three characters in the Part Number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS compliant 100 % tin leads. Blank or no suffix = standard tin/lead termination.
CASE CODE PART NUMBER*
3 WVDC AT + 85 °C, SURGE = 3.6 V . . . 2 WVDC AT + 125 °C, SURGE = 2.4 V
6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V
10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 9 V
16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V
MAX. DCL
at + 25 °C
(µA)
MAX. DF
at + 25 °C
120 Hz (%)
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40020
114 Revision: 18-Mar-08
199D
Solid-Electrolyte TANTALEX® Capacitors,
Vishay Sprague
Resin-Coated, Radial-Lead
STANDARD RATINGS
CAPACITANCE
(µF)
3.3 B 199D335(1)020B(2)(3) 0.8 6
4.7 B 199D475(1)020B(2)(3) 1.0 6
6.8 C 199D685(1)020C(2)(3) 1.5 6
10.0 C 199D106(1)020C(2)(3) 2.0 8
15.0 D 199D156(1)020D(2)(3) 2.5 8
22.0 D 199D226(1)020D(2)(3) 3.0 8
33.0 E 199D336(1)020E(2)(3) 4.0 8
47.0 E 199D476(1)020E(2)(3) 5.0 8
68.0 F 199D686(1)020F(2)(3) 6.0 8
100.0 F 199D107(1)020F(2)(3) 7.0 10
1.0 A 199D105(1)025A(2)(3) 0.5 4
1.5 A 199D155(1)025A(2)(3) 0.5 6
2.2 A 199D225(1)025A(2)(3) 0.5 6
3.3 B 199D335(1)025B(2)(3) 0.8 6
4.7 B 199D475(1)025B(2)(3) 1.0 6
6.8 C 199D685(1)025C(2)(3) 1.5 6
10.0 C 199D106(1)025C(2)(3) 2.5 8
15.0 D 199D156(1)025D(2)(3) 3.0 8
22.0 D 199D226(1)025D(2)(3) 4.0 8
33.0 E 199D336(1)025E(2)(3) 5.0 8
47.0 E 199D476(1)025E(2)(3) 6.0 8
68.0 F 199D686(1)025F(2)(3) 7.0 8
0.1 A 199D104(1)035A(2)(3) 0.5 4
0.15 A 199D154(1)035A(2)(3) 0.5 4
0.22 A 199D224(1)035A(2)(3) 0.5 4
0.33 A 199D334(1)035A(2)(3) 0.5 4
0.47 A 199D474(1)035A(2)(3) 0.5 4
0.68 A 199D684(1)035A(2)(3) 0.5 4
1.0 A 199D105(1)035A(2)(3) 0.5 4
1.5 A 199D155(1)035A(2)(3) 0.5 6
1.8 B 199D185(1)035B(2)(3) 0.7 6
2.2 B 199D225(1)035B(2)(3) 0.7 6
3.3 B 199D335(1)035B(2)(3) 1.0 6
4.7 C 199D475(1)035C(2)(3) 1.5 6
6.8 D 199D685(1)035D(2)(3) 2.3 6
10.0 D 199D106(1)035D(2)(3) 3.5 8
15.0 E 199D156(1)035E(2)(3) 4.0 8
22.0 E 199D226(1)035E(2)(3) 5.0 8
33.0 F 199D336(1)035F(2)(3) 6.0 8
47.0 F 199D476(1)035F(2)(3) 7.0 8
0.1 A 199D104(1)050A(2)(3) 0.5 4
0.15 A 199D154(1)050A(2)(3) 0.5 4
0.22 A 199D224(1)050A(2)(3) 0.5 4
0.33 A 199D334(1)050A(2)(3) 0.5 4
0.47 A 199D474(1)050A(2)(3) 0.5 4
0.68 A 199D684(1)050A(2)(3) 0.5 4
1.0 B 199D105(1)050B(2)(3) 0.5 4
1.5 C 199D155(1)050C(2)(3) 0.7 6
2.2 C 199D225(1)050C(2)(3) 1.1 6
3.3 D 199D335(1)050D(2)(3) 1.5 6
4.7 D 199D475(1)050D(2)(3) 2.0 6
6.8 F 199D685(1)050F(2)(3) 3.0 6
10.0 F 199D106(1)050F(2)(3) 4.0 8
15.0 F 199D156(1)050F(2)(3) 5.0 8
22.0 F 199D226(1)050F(2)(3) 6.0 8
Notes:
* (1) For capacitance tolerance: (X0 = ± 20 %), (X9 = ± 10 %) or (X5 = 5 %)
(2) To specify Lead Style/Spacing/Packaging insert the last three characters in the Part Number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS compliant 100 % tin leads. Blank or no suffix = standard tin/lead termination.
Document Number: 40020 For technical questions, contact: tantalum@vishay.com
Revision: 18-Mar-08 115
CASE CODE PART NUMBER*
20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V
25 WVDC AT + 85 °C, SURGE = 33 V . . . 17 WVDC AT + 125 °C, SURGE = 21 V
35 WVDC AT + 85 °C, SURGE = 46 V . . . 23 WVDC AT + 125 °C, SURGE = 28 V
50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 40 V
MAX. DCL
at + 25 °C
(µA)
MAX. DF
at + 25 °C
120 Hz (%)
www.vishay.com
199D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Resin-Coated, Radial-Lead
STANDARD REEL PACKAGING SPECIFICATIONS PER EIA RS-468 in inches [millimeters]
LEAD CONFIGURATION 6.7
LEAD CONFIGURATION 2, 4, 5
LEAD CONFIGURATION X, Z
0.118 [3.0]
MAX.
0.0354 + 0.030 - 0.020
[8.99 + 0.762 - 0.508]
ADHESIVE TAPE
CARRIER TAPE
CASE CODE OBSOLETE LEAD STYLE LEAD SPACING
A, B, C, D A1, A6
SEE LEAD STYLE/SPACING
TABLE FOR LEAD SPACING
1V1 (Bulk),
2B1 (T and R)
LEAD DIAMETER
0.500 ± 0.012
[12.70 ± 0.305]
0.100 + 0.024 - 0.016
1.270 [32.26]
MAX.
0.728 ± 0.020
0.630 ± 0.020
[16.0 ± 0.508]
[2.54 + 0.60 - 0.40]
[18.49 ± 0.508]
LL MIN.
(BULK)
0.187 [4.7]
A, B, C, D B1, B6
A, B, C,
D, E , F
Note:
• Lead space measured within 0.05 [1.27] of the body of the capacitor, or from the bottom of the crimp. Lead Style ‘A’ may be supplied with
0.59 [15] anode lead and 0.47 [12] cathode lead.
E2, E7
XV1 (Bulk),
XB1 (T and R)
6V1 (Bulk),
6B1 (T and R)
0.100 + 0.024 - 0.016
[2.54 + 0.60 - 0.40]
0.200 + 0.024 - 0.016
[5.08 + 0.06 - 0.40]
0.187 [4.7]
0.187 [4.7]
Tape and Reel Packaging: Type 199D radial-leaded tantalum capacitors, all lead styles exept 1, 3 and Y are available taped
and reeled per EIA-468.
CASE CODE A B C D E F
Quantity per box bulk 1000 500 100
Quantity per box ammopack 2500 2000 1500 1000 500
Quantity per reel 1000 500
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40020
116 Revision: 18-Mar-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Loading...