19225
VLMO30.., VLMS30.., VLMY30..
Low Current SMD LED
FEATURES
• SMD LED with exceptional brightness
• Compatible with automatic placement
equipment
• EIA and ICE standard package
• Compatible with IR reflow, vapor phase
and wave solder processes according to
CECC 00802 and J-STD-020
• Available in 8 mm tape
• Low profile package
• Non-diffused lens: excellent for coupling to light
pipes and backlighting
• Very low power consumption
• Luminous intensity ratio in one packaging unit
I
Vmax./IVmin.
• ESD withstand voltage: up to 2 kV according to
JESD22-A114-B
• Preconditioning: according to JEDEC level 2a
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Vishay Semiconductors
≤ 1.6
DESCRIPTION
These new devices have been designed to meet the
increasing demand for AllnGaP based low current
SMD LEDs.
The package of the VLM.30.. is the PLCC-2 package.
It consists of a lead frame which is embedded in a
white thermoplast. The reflector inside this package is
filled up with clear epoxy.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: SMD PLCC-2
APPLICATIONS
• Automotive: backlighting in dashboards and
switches
• Telecommunication: indicator and backlighting in
telephone and fax
• Indicator and backlight for audio and video
equipment
• Indicator and backlight for battery driven equipment
• Indicator and backlight in office equipment
• Flat backlight for LCDs, switches and symbols
• General use
• Product series: low current
• Angle of half intensity: ± 60°
PARTS TABLE
PART COLOR, LUMINOUS INTENSITY TECHNOLOGY
VLMS3000-GS08
VLMS3000-GS18
VLMS30J1K2-GS08
VLMS30J1K2-GS18
VLMS30K1L2-GS08
VLMS30K1L2-GS18
Super red, I
Super red, I
Super red, I
Super red, I
Super red, I
Super red, I
> 2.8 mcd
V
> 2.8 mcd
V
= (4.5 to 11.2) mcd
V
= (4.5 to 11.2) mcd
V
= (7.1 to 18) mcd
V
= (7.1 to 18) mcd
V
AllnGaP
AllnGaP
AllnGaP
AllnGaP
AllnGaP
AllnGaP
Document Number 81322
Rev. 1.2, 01.-Dec-09
For technical support, please contact: LED@vishay.com
www.vishay.com
1
VLMO30.., VLMS30.., VLMY30..
Vishay Semiconductors
PARTS TABLE
PART COLOR, LUMINOUS INTENSITY TECHNOLOGY
VLMS30J1L2-GS08
VLMS30J1L2-GS18
VLMS30J2K2-GS08
VLMS30J2K2-GS18
VLMS30K2L2-GS08
VLMO3000-GS08
VLMO3000-GS18
VLMO30K1L2-GS08
VLMO30K1L2-GS18
VLMO30L1M2-GS08
VLMO30L1M2-GS18
VLMO30K1M2-GS08
VLMO30K1M2-GS18
VLMY3000-GS08
VLMY3000-GS18
VLMY3001GS08
VLMY3001-GS18
VLMY30J2L1-GS08
VLMY30J2L1-GS18
VLMY30K2M1-GS08
VLMY30K2M1-GS18
VLMY30J2M1-GS08
VLMY30J2M1-GS18
Super red, I
Super red, I
Super red, I
Super red, I
Super red, I
Orange, I
Orange, I
Orange, I
Orange, I
Orange, I
Orange, I
Ye l l o w, I
Ye l l o w, I
Ye l l o w, I
Ye l l o w, I
Ye l l o w, I
Ye l l o w, I
Ye l low, I
Ye l low, I
= (4.5 to 18) mcd
V
= (4.5 to 18) mcd
V
= (5.6 to 11.2) mcd
V
= (5.6 to 11.2) mcd
V
= (9 to 18) mcd
V
Orange, I
Orange, I
Ye l l o w, I
Ye l l o w, I
> 5.6 mcd
V
> 5.6 mcd
V
= (7.1 to 18) mcd
V
= (7.1 to 18) mcd
V
= (11.2 to 28) mcd
V
= (11.2 to 28) mcd
V
= (7.1 to 28) mcd
V
= (7.1 to 28) mcd
V
> 4.5 mcd
V
> 4.5 mcd
V
= (7.1 to 18) mcd
V
= (7.1 to 18) mcd
V
= (5.6 to 14) mcd
V
= (5.6 to 14) mcd
V
= (9 to 22.4) mcd
V
= (9 to 22.4) mcd
V
= (5.6 to 22.4) mcd
V
= (5.6 to 22.4) mcd
V
AllnGaP
AllnGaP
AllnGaP
AllnGaP
AllnGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
ABSOLUTE MAXIMUM RATINGS 1) VLM30..
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage
2)
DC forward current I
Surge forward current t
≤ 10 µs I
p
Power dissipation P
Junction temperature T
Operating temperature range T
Storage temperature range T
Thermal resistance junction/
ambient
Note:
1)
T
= 25 °C, unless otherwise specified
amb
2)
Driving the LED in reverse direction is suitable for short term application
www.vishay.com
Mounted on PC board
(pad size > 16 mm
2
)
For technical support, please contact: LED@vishay.com
2
R
V
F
FSM
amb
stg
thJA
R
6V
15 mA
0.1 A
V
j
40 mW
125 °C
- 40 to + 100 °C
- 40 to + 100 °C
400 K/W
Document Number 81322
Rev. 1.2, 01.-Dec-09
VLMO30.., VLMS30.., VLMY30..
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMS30.., RED
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
2)
Dominant wavelength
Peak wavelength
Angle of half intensity
Forward voltage
Reverse voltage
Note:
1)
T
= 25 °C, unless otherwise specified
amb
2)
In one packing unit I
Vmax./IVmin.
≤ 1.6
IF = 2 mA
= 10 mA
I
F
= 2 mA
I
F
= 2 mA
I
F
= 2 mA
I
F
= 2 mA
I
F
I
= 2 mA
F
= 2 mA λ
I
F
I
= 2 mA λ
F
= 2 mA
I
F
I
= 2 mA V
F
= 10 µA V
I
R
VLMS3000
VLMS3000
VLMS30J1K2
VLMS30K1L2
VLMS30J1L2
VLMS30J2K2
VLMS30K2L2
OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMO30.., ORANGE
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IF = 2 mA VLMO3000 I
I
= 10 mA VLMO3000 I
F
Luminous intensity
2)
Dominant wavelength
Peak wavelength
Angle of half intensity
Forward voltage
Reverse voltage
Note:
1)
T
= 25 °C, unless otherwise specified
amb
2)
In one packing unit I
Vmax./IVmin.
≤ 1.6
I
= 2 mA VLMO30K1L2 I
F
I
= 2 mA VLMO30L1M2 I
F
I
= 2 mA VLMO30K1M2 I
F
I
= 2 mA λ
F
= 2 mA λ
I
F
I
= 2 mA ϕ ± 60 deg
F
= 2 mA V
I
F
I
= 10 µA V
R
I
V
I
V
I
V
I
V
I
V
I
V
I
V
d
p
2.8 mcd
20 mcd
4.5 11.2 mcd
7.1 18 mcd
4.5 18 mcd
5.6 11.2 mcd
918mcd
624 636 nm
635 nm
ϕ ± 60 deg
F
R
V
V
V
V
V
d
p
F
R
615 V
5.6 mcd
7.1 18 mcd
11.2 28 mcd
7.1 28 mcd
600 609 nm
615 V
1.8 2.2 V
50 mcd
610 nm
1.8 2.2 V
OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMY30.., YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
2)
Dominant wavelength I
Peak wavelength I
Angle of half intensity I
Forward voltage I
Reverse voltage I
Note:
1)
T
= 25 °C, unless otherwise specified
amb
2)
In one packing unit I
Vmax./IVmin.
≤ 1.6
Document Number 81322
Rev. 1.2, 01.-Dec-09
IF = 2 mA VLMY3000 I
I
= 10 mA VLMY3000 I
F
I
= 10 mA VLMY3001 I
F
I
= 2 mA VLMY30J2L1 I
F
I
= 2 mA VLMY30K2M1 I
F
I
= 2 mA VLMY30J2M1 I
F
= 2 mA λ
F
= 2 mA λ
F
= 2 mA ϕ ± 60 deg
F
= 2 mA V
F
= 10 µA V
R
V
V
V
V
V
V
d
p
F
R
For technical support, please contact: LED@vishay.com
4.5 mcd
50 mcd
7.1 18 mcd
5.6 14 mcd
9 22.4 mcd
5.6 22.4 mcd
581 594 nm
585 nm
1.8 2.2 V
615 V
www.vishay.com
3
VLMO30.., VLMS30.., VLMY30..
Vishay Semiconductors
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD OPTIONAL MIN. MAX.
H
J
K
L
M
Note:
Luminous Intensity is tested at a current pulse duration of 25 ms and
an accuracy of ± 11 %. The above type numbers represent the order
grous which include only a few brightness groups. Only one group
will be shipped in one reel (there will be no mixing of two groups on
each reel). In order to ensure availability, single brightness groups
will not be orderable. In a similar manner for colors where
wavelength groups are measured and binned, single wavelength
groups will be shipped in any one reel. In order to ensure availability,
single wavelength groups will not be orderable.
1 2.8 3.55
2 3.55 4.5
1 4.5 5.6
2 5.6 7.1
1 7.1 9.0
2 9.0 11.2
1 11.2 14.0
2 14.0 18.0
1 18.0 22.4
2 22.4 28.0
COLOR CLASSIFICATION
YEL LO W ORANGE
GROUP
DOM. WAVELENGTH (nm)
MIN. MAX. MIN. MAX.
1 581 584
2 583 586 600 603
3 585 588 602 605
4 587 590 604 607
5 589 592 606 609
6 591 594
Note:
Wavelengths are tested at a current pulse duration of 25 ms and an
accuracy of ± 1 nm.
CROSSING TABLE
VISHAY OSRAM
VLMO30K1L2 LOT67K-K1L2
VLMO30K1M2 LOT67K-K1M2
VLMO30L1M2 LOT67K-L1M2
VLMS30J1K2 LST67K-J1K2
VLMS30J1L2 LST67K-J1L2
VLMS30K1L2 LST67K-K1L2
VLMY30J2L1 LYT67K-J2L1
VLMY30J2M1 LYT67K-J2M1
VLMY30K2M1 LYT67K-K2M1
TYPICAL CHARACTERISTICS
T
= 25 °C, unless otherwise specified
amb
25
20
15
10
- Forward Current (mA)
5
F
I
0
18254
Figure 1. Forward Current vs. Ambient Temperature
T
- Ambient Temperature (°C)
amb
1000
tp/T= 0.01
0.02
0.05
100
0.2
- Forward Current (mA)
F
I
100806040200
17557
0.5
1
10
0.01 0.1 1 10 100
tp - Pulse Duration (ms)
0.1
Figure 2. Forward Current vs. Pulse Length
www.vishay.com
4
For technical support, please contact: LED@vishay.com
Document Number 81322
Rev. 1.2, 01.-Dec-09
0°
10° 20°
30°
40°
1.0
0.9
0.8
0.7
- Relative Luminous Intensity
V rel
I
95 10319
0.6
0.4 0.2 0
50°
60°
70°
80°
Figure 3. Rel. Luminous Intensity vs. Angular Displacement
ϕ - Angular Displacement
VLMO30.., VLMS30.., VLMY30..
Vishay Semiconductors
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
- Relative Luminous Intensity
V rel
0.25
I
0
- 40 - 20 0 20 40 60 80 100
18251
Figure 6. Rel. Luminous Intensity vs. Ambient Temperature
yellow
orange
red
T
- Ambient Temperature (°C)
amb
1.2
1.0
0.8
0.6
0.4
- Relative Luminous Intensity
0.2
V rel
I
0.0
18266
yellow
540 580 620 660 700
orange
red
λ - Wavelength (nm)
Figure 4. Relative Intensity vs. Wavelength
100
10
2.00
1.95
1.90
1.85
1.
80
1.75
- Forward Voltage (V)
F rel
V
1.70
1.65
- 40 - 20 0 20 40 60 80 100
18252
T
yellow
orange
red
- Ambient Temperature (°C)
amb
Figure 7. Forward Voltage vs. Ambient Temperature
- Forward Current (mA)
F
I
1
1 1.5 2 2.5 3
95 10878
VF - Forward Voltage (V)
Figure 5. Forward Current vs. Forward Voltage
Document Number 81322
Rev. 1.2, 01.-Dec-09
For technical support, please contact: LED@vishay.com
www.vishay.com
5
VLMO30.., VLMS30.., VLMY30..
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
± 0.2
3.5
± 0.1
1.75
0.9
Pin identification
± 0.15
CA
2.8
Ø 2.4
+ 0.15
3
2.2
Drawing-No.: 6.541-5067.01-4
Issue: 5; 04.11.08
20541
2.6 (2.8)
1.6 (1.9)
technical drawings
according to DIN
specifications
Mounting Pad Layout
1.2
4
area covered with
solder resist
4
www.vishay.com
6
For technical support, please contact: LED@vishay.com
Document Number 81322
Rev. 1.2, 01.-Dec-09
VLMO30.., VLMS30.., VLMY30..
METHOD OF TAPING/POLARITY AND TAPE AND REEL
Vishay Semiconductors
SMD LED (VLM.3 - SERIES)
Vishay’s LEDs in SMD packages are available in an
antistatic 8 mm blister tape (in accordance with DIN
IEC 40 (CO) 564) for automatic component insertion.
The blister tape is a plastic strip with impressed
component cavities, covered by a top tape.
Adhesive tape
Blister tape
Component cavity
94 8670
TAPING OF VLM.3...
3.5
3.1
2.2
2.0
REEL PACKAGE DIMENSION IN MILLIMETERS
FOR SMD LEDS, TAPE OPTION GS08
(= 1500 PCS.)
10.0
13.00
12.75
14.4 max.
9.0
63.5
60.5
94 8665
Identification
Label:
Vishay
type
group
tape code
production
code
quantity
180
178
4.5
3.5
120°
2.5
1.5
Figure 9. Reel Dimensions - GS08
REEL PACKAGE DIMENSION IN MILLIMETERS
FOR SMD LEDS, TAPE OPTION GS18
(= 8000 PCS.) PREFERRED
10.4
120°
8.4
5.75
5.25
3.6
3.4
1.85
1.6
1.4
4.1
3.9
2.05
1.95
4.1
3.9
1.65
Figure 8. Tape Dimensions in mm for PLCC-2
8.3
7.7
0.25
94 8668
4.0
3.6
Identification
Label:
Vishay
type
group
tape code
production
code
quantity
4.5
321
329
3.5
2.5
1.5
13.00
12.75
14.4 max.
Figure 10. Reel Dimensions - GS18
62.5
60.0
18857
Document Number 81322
Rev. 1.2, 01.-Dec-09
For technical support, please contact: LED@vishay.com
www.vishay.com
7
VLMO30.., VLMS30.., VLMY30..
Vishay Semiconductors
SOLDERING PROFILE BAR CODE PRODUCT LABEL
EXAMPLE:
IR Reflow Soldering Profile for Lead (Pb)-free Soldering
300
250
200
150
Temperature (°C)
100
50
0
0 50 100 150 200 250 300
19885
Preconditioning acc. to JEDEC Level 2a
255 °C
240 °C
217 °C
max. 120 s
max. ramp up 3 °C/s
max. 100 s
max. ramp down 6 °C/s
Time (s)
max. 260 °C
245 °C
max. 30 s
max. 2 cycles allowed
Figure 11. Vishay Lead (Pb)-free Reflow Soldering Profile
(acc. to J-STD-020)
TTW Soldering (acc. to CECC00802)
300
250
200
150
100
Temperature (°C)
50
0
0 50 100 150 200 250
948626-1
235 °C
to 260 °C
first wave
ca. 200 K/s
100 °C
to 130 °C
5 s
2 K/s
forced cooling
Time (s)
lead temperature
second
full line: typical
wave
dotted line: process limits
ca. 2 K/s
ca. 5 K/s
Figure 12. Double Wave Soldering of Opto Devices (all Packages)
106
A
H
VISHAY
BC D E F G
A) Type of component
B) Manufacturing plant
C) SEL - selection code (bin):
e.g.: K1 = code for luminous intensity group
3 = code for color group
D) Date code year/week
E) Day code (e.g. 5: Friday)
F) Batch no.
G) Total quantity
H) Company code
37
20119
www.vishay.com
8
For technical support, please contact: LED@vishay.com
Document Number 81322
Rev. 1.2, 01.-Dec-09
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Loading...