Page 1
TLUR2400, TLUR2401
Vishay Semiconductors
Universal LED, Ø 1.8 mm Tinted Diffused Miniplast Package
FEATURES
• For DC and pulse operation
• Luminous intensity categorized
• End-to-end stackable in centre-to-centre
spacing of 0.1" (2.54 mm)
• Compliant to RoHS Directive 2002/95/EC
and in accordance to WEEE 2002/96/EC
19229
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: 1.8 mm (miniplast)
• Product series: standard
• Angle of half intensity: ± 20°
APPLICATIONS
• General indicating and lighting purposes
PARTS TABLE
PART COLOR, LUMINOUS INTENSITY TECHNO LOG Y
> 15 mcd (typ.)
TLUR2400
TLUR2400-AS12
TLUR2401
TLUR2401-AS12
ABSOLUTE MAXIMUM RATINGS (T
Red, I
V
Red, I
> 15 mcd (typ.)
V
Red, I
= (4 to 32) mcd
V
Red, I
= (4 to 32) mcd
V
= 25 °C, unless otherwise specified)
amb
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
TLUR2400, TLUR2401
PARAMETER TEST CONDITION SYMBOL VA LUE UNIT
T
T
R
V
I
FSM
T
amb
stg
T
T
thJA
R
F
V
j
sd
sd
6V
20 mA
0.5 A
60 mW
100 °C
- 40 to + 100 °C
- 55 to + 100 °C
260 °C
260 °C
450 K/W
Reverse voltage
DC Forward current
Surge forward current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction/
ambient
10 sI
t
p
T
55 °C P
amb
t 3 s, 2 mm from body
t 5 s, 4 mm from body
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Document Number 83288
Rev. 1.4, 30-May-11
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
www.vishay.com
1
Page 2
TLUR2400, TLUR2401
0
5
10
15
20
25
30
35
40
0 1020304050607080 90 100
T
amb
- Ambient Temperature (°C)
17517
I - Forward Current (mA)
F
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
TLUR2400, TLUR2401, RED
= 25 °C, unless otherwise specified)
amb
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
Dominant wavelength
Peak wavelength
Angle of half intensity
Forward voltage
Reverse voltage
Junction capacitance
Note:
1)
In one packing unit I
1)
Vmin./IVmax.
0.5
IF = 10 mA
= 10 mA
I
F
= 10 mA
I
F
I
= 10 mA
F
I
= 20 mA V
F
I
= 10 AV
R
= 0, f = 1 MHz C
V
R
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD MIN. MAX.
P 4 8
Q 6.3 12.5
R 10 20
S 16 32
T 25 50
TLUR2400
TLUR2401
Note:
Luminous intensity is tested at a current pulse duration of 25 ms.
The above type numbers represent the order groups which include
only a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not be
orderable.
In a similar manner for colors where wavelength groups are measured
and binned, single wavelength groups will be shipped on any one bag.
In order to ensure availability, single wavelength groups will not be
I
V
I
V
d
p
415 mcd
432mcd
630 nm
640 nm
± 20 deg
F
R
j
615 V
23V
50 pF
orderable.
TYPICAL CHARACTERISTICS (T
Figure 1. Forward Current vs. Ambient Temperature
www.vishay.com
2
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
= 25 °C, unless otherwise specified)
amb
1.0
0.9
0.8
- Relative Luminous Intensity
0.7
V rel
I
0.6
95 10094
Figure 2. Rel. Luminous Intensity vs. Angular Displacement
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
0°
10° 20°
0.4 0.2 0 0.2 0.4
Document Number 83288
30°
40°
50°
60°
70°
80°
0.6
Rev. 1.4, 30-May-11
Page 3
TLUR2400, TLUR2401
0.1
1
10
100
0
VF - Forward Voltage (V)
16634
I
F
- Forward Current (mA)
super red
5 432
1
red
0
0.4
0.
8
1.2
1.6
95 10074
I
V rel
- RelativeLuminous Intensity
IF = 10 mA
T
amb
- Ambient Temperature (°C)
20 40 60 800100
red
IF - Forward Current (mA)
100
0.01
0.1
1
10
95 10076
I
V rel
- Relative Luminous Intensity
101
0.0
0.2
0.4
0.6
0.8
1.0
1.2
550 590 630 670 710 750
17521
λ - Wavelength (nm)
red
I
rel
- Relative Intensity
95 11262
Drawing-No.: 6.544-5052.01-4
Issue: 1; 12.10.95
Vishay Semiconductors
Figure 3. Forward Current vs. Forward Voltage
Figure 4. Rel. Luminous Intensity vs. Ambient Temperature
PACKAGE DIMENSIONS in millimeters
Figure 5. Relative Luminous Intensity vs. Forward Current
Figure 6. Relative Intensity vs. Wavelength
Document Number 83288
Rev. 1.4, 30-May-11
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
www.vishay.com
3
Page 4
TLUR2400, TLUR2401
Identification label:
355
90
30
48
45
52 max.
948641
Vishay/type/group/tape code/production code/quantity
Paper
Adhesive tape
Identification label
Reel
Tape
Diodes: anode before cathode
Phototransistors: emitter before collector
Code 21
Diodes:
cathode before anode
Phototransistors:
collector before emitter
Code 12
94 8671
Vishay Semiconductors
REEL DIMENSIONS in millimeters TAPE
Figure 7. Reel
TAPE DIMENSIONS in millimeters
± 0.2
0.3
± 0.5
± 0.3
+ 1
- 0.5
9
12
18
2.54
Quantity per:
94 8171
Ø 4
+ 0.6
5.08
- 0.1
Figure 8. LED in Tape
± 1
± 0.2
± 0.7
12.7
± 1
12.7
± 0.7
6.35
± 0.2
Measure limit over 20 index-holes: ± 1
± 2
“H”
0.9 max.
Reel
(Mat. - No. 1764)
2000
www.vishay.com
4
THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Option Dim. “H” ± 0.5 mm
AS 17.3
For technical support, please contact: LED@vishay.com
This document is subject to change without notice.
Document Number 83288
Rev. 1.4, 30-May-11
Page 5
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Loading...