Page 1
TLUG240., TLUO240., TLUY240.
19229
Vishay Semiconductors
Universal LED, Ø 1.8 mm Tinted Diffused Miniplast Package
FEATURES
• Three colors
• For DC and pulse operation
• Luminous intensity categorized
• End-to-end stackable in centre-to-centre
spacing of 0.1" (2.54 mm)
• Compliant to RoHS Directive 2002/95/EC
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: 1.8 mm (miniplast)
• Product series: standard
• Angle of half intensity: ± 20°
and in accordance to WEEE 2002/96/EC
APPLICATIONS
• General indicating and lighting purposes
PARTS TABLE
PART COLOR, LUMINOUS INTENSITY TECHNO LOG Y
> 1.6 mcd
TLUO2400
TLUO2401
TLUO2401-AS12
TLUY2400
TLUY2400-AS12
TLUY2401
TLUY2401-AS12
TLUY2401-AS12Z
TLUG2400
TLUG2400-AS12Z
TLUG2400-ASZ
TLUG2400-MS12Z
TLUG2400-MS21Z
TLUG2401
TLUG2401-AS12
TLUG2401-AS12Z
Red, I
Red, I
Ye l lo w, I
Ye l lo w, I
Ye l lo w, I
Green, I
Green, I
Green, I
Green, I
Green, I
Green, I
Green, I
Green, I
Red, I
V
= (4 to 20) mcd
V
= (4 to 20) mcd
V
Yellow, I
Yellow, I
> 1 mcd
V
> 1 mcd
V
= (2.5 to 12.5) mcd
V
= (2.5 to 12.5) mcd
V
= (2.5 to 12.5) mcd
V
> 1.6 mcd
V
> 1.6 mcd
V
> 1.6 mcd
V
> 1.6 mcd
V
> 1.6 mcd
V
= (4 to 20) mcd
V
= (4 to 20) mcd
V
= (4 to 20) mcd
V
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaAsP on GaP
GaP on GaP
GaP on GaP
GaP on GaP
GaP on GaP
GaP on GaP
GaP on GaP
GaP on GaP
GaP on GaP
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Document Number 83053
Rev. 2.1, 23-Mar-11
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
www.vishay.com
1
Page 2
TLUG240., TLUO240., TLUY240.
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (T
= 25 °C, unless otherwise specified)
amb
TLUO240., TLUY240., TLUG240.
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
Reverse voltage
TLUO240. I
DC forward current
TLUY240. I
TLUG240. I
10 µs I
Surge forward current
t
p
TLUO240. P
Power dissipation
T
amb
55 °C
TLUY240. P
TLUG240. P
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
t 3 s, 2 mm from body T
t 5 s, 4 mm from body T
TLUO240. R
Thermal resistance junction/
ambient
TLUY240. R
TLUG240. R
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
V
R
F
F
F
FSM
V
V
V
T
j
T
amb
T
stg
sd
sd
thJA
thJA
thJA
= 25 °C, unless otherwise specified)
amb
6V
30 mA
30 mA
30 mA
1A
100 mW
100 mW
100 mW
100 °C
- 40 to + 100 °C
- 55 to + 100 °C
260 °C
260 °C
450 K/W
450 K/W
450 K/W
TLUO240., RED
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
Dominant wavelength
Peak wavelength
Angle of half intensity
Forward voltage
Reverse voltage
Junction capacitance
Note:
1)
in one packing unit I
1)
Vmin./IVmax.
0.5
IF = 10 mA
= 10 mA
I
F
= 10 mA
I
F
= 10 mA
I
F
I
= 20 mA V
F
= 10 µA V
I
R
V
= 0, f = 1 MHz C
R
TLUO2400
TLUO2401
I
V
I
V
d
p
1.6 2 mcd
4520mcd
612 625 nm
630 nm
± 20 deg
F
R
j
615 V
23V
50 pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
= 25 °C, unless otherwise specified)
amb
TLUY240., YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
1)
Dominant wavelength
Peak wavelength
Angle of half intensity
Forward voltage
Reverse voltage
Junction capacitance
Note:
1)
in one packing unit I
Vmin./IVmax.
0.5
www.vishay.com
2
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IF = 10 mA
= 10 mA
I
F
= 10 mA
I
F
= 10 mA
I
F
I
= 20 mA V
F
= 10 µA V
I
R
= 0, f = 1 MHz C
V
R
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
TLUY2400
TLUY2401
I
V
I
V
d
p
14 mcd
2.5 8 12.5 mcd
581 594 nm
585 nm
± 20 deg
F
R
j
615 V
2.4 3 V
50 pF
Document Number 83053
Rev. 2.1, 23-Mar-11
Page 3
TLUG240., TLUO240., TLUY240.
0
5
10
15
20
25
30
35
40
0 1020304050607080 90 100
T
amb
- Ambient Temperature (°C)
18841
I
F
- Forward Current (mA)
red, yellow, green
0.01 0.1 1 10
1
10
100
1000
10 000
t
p
- Pulse Length (ms)
100
95 10093
I
F
- Forward Current (mA)
green, yellow
orange, red
tp/T = 0.01
0.02
0.05
0.1
0.2
1
0.5
T
amb
≤ 55 °C
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
= 25 °C, unless otherwise specified)
amb
TLUG240., GREEN
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
Dominant wavelength
Peak wavelength
Angle of half intensity
Forward voltage
Reverse voltage
Junction capacitance
Note:
1)
in one packing unit I
1)
Vmin./IVmax.
0.5
IF = 10 mA
I
= 10 mA
F
= 10 mA
I
F
I
= 10 mA
F
I
= 20 mA V
F
= 10 µA V
I
R
= 0, f = 1 MHz C
V
R
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD MIN. MAX.
L 1 2
M 1.6 3.2
N 2.5 5
P 4 8
Q 6.3 12.5
Note:
Luminous intensity is tested at a current pulse duration of 25 ms and
an accuracy of ± 11 %.
These type numbers represent the order groups which include only
a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not be
orderable.
In a similar manner for colors where wavelength groups are
measured and binned, single wavelength groups will be shipped on
any one bag.
In order to ensure availability, single wavelength groups will not be
orderable.
TLUG2400
TLUG2401
COLOR CLASSIFICATION
GROUP
1 581 584
2 583 586
3 585 588 562 565
4 587 590 564 567
5 589 592 566 569
6 591 594 568 571
7 570 573
8 572 575
Note:
Wavelengths are tested at a current pulse duration of 25 ms.
I
V
I
V
d
p
1.6 5 mcd
41220mcd
562 575 nm
565 nm
± 20 deg
F
R
j
615 V
2.4 3 V
50 pF
DOM. WAVELENGTH (nm)
YELLOW GREEN
MIN. MAX. MIN. MAX.
TYPICAL CHARACTERISTICS
T
= 25 °C, unless otherwise specified
amb
Document Number 83053
Rev. 2.1, 23-Mar-11
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Figure 1. Forward Current vs. Ambient Temperature
Figure 2. Forward Current vs. Pulse Length
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
www.vishay.com
3
Page 4
TLUG240., TLUO240., TLUY240.
0.1
1
10
100
0
VF - Forward Voltage (V)
16634
I
F
- Forward Current (mA)
super red
5 432
1
0.1
1
10
100
1000
95 10086
VF- Forward Voltage (V)
I - Forward Current (mA)
F
tp/T = 0.001
t
p
=10µs
red
1086420
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10088
500
0.5 0.2 0.1 0.05 0.021
I
F
(mA)
t
p
/T
I - RelativeLuminous Intensity
v rel
2.0
red
I
FAV
= 10 mA, const.
IF- Forward Current (mA)
100
red
0.01
0.1
1
10
95 10089
I - RelativeLuminous Intensity
v rel
101
Vishay Semiconductors
0°
10° 20°
30°
1.6
red
1.0
0.9
0.8
- Relative Luminous Intensity
0.7
V rel
I
95 10094
0.4 0.2 0 0.2 0.4
0.6
40°
50°
60°
70°
80°
0.6
Figure 3. Rel. Luminous Intensity vs. Angular Displacement
1.2
0.8
0.4
v rel
I - RelativeLuminous Intensity
95 10087
IF=10mA
0
20 40 60 800 100
T
-Ambient Temperature (°C)
amb
Figure 6. Rel. Luminous Intensity vs. Ambient Temperature
www.vishay.com
4
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Figure 4. Forward Current vs. Forward Voltage
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
Figure 5. Forward Current vs. Forward Voltage
Figure 7. Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle
Figure 8. Relative Luminous Intensity vs. Forward Current
Document Number 83053
Rev. 2.1, 23-Mar-11
Page 5
TLUG240., TLUO240., TLUY240.
590 610 630 650 670
690
λ - Wavelength (nm)
red
0
0.2
0.4
0.6
0.8
1.2
95 10090
I - RelativeLuminous Intensity
v rel
1.0
0.1
1
10
100
1000
1086420
95 10030
VF - Forward Voltage (V)
I
F
- Forward Current (mA)
yellow
tp/T = 0.001
t
p
= 10 µs
yellow
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10260
500
0.5 0.2 0.1 0.05 0.021
I
F
(mA)
t
p
/T
I
spec
- Specific Luminous Intensity
2.0
yellow
IF - Forward Current (mA)
100
0.1
1
10
95 10033
I
V rel
- Relative Luminous Intensity
101
0.01
550 570 590 610 630
0
0.2
0.4
0.6
0.8
1.2
650
95 10039
λ - Wavelength (nm)
1.0
yellow
I
rel
- Relative Intensity
Vishay Semiconductors
Figure 9. Relative Intensity vs. Wavelength
Figure 10. Forward Current vs. Forward Voltage
1.6
yellow
1.2
Figure 12. Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle
Figure 13. Relative Luminous Intensity vs. Forward Current
95 10031
Figure 11. Rel. Luminous Intensity vs. Ambient Temperature
Document Number 83053
Rev. 2.1, 23-Mar-11
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.8
0.4
- Relative Luminous Intensity
V rel
I
0
0
IF = 10 mA
20 40 60 80
T
- Ambient Temperature (°C)
amb
100
Figure 14. Relative Intensity vs. Wavelength
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
www.vishay.com
5
Page 6
TLUG240., TLUO240., TLUY240.
0.1
1
10
100
1000
1086420
95 10034
VF - Forward Voltage (V)
I
F
- Forward Current (mA)
green
tp/T = 0.001
t
p
= 10 µs
0
0.4
0.8
1.2
1.6
95 10035
I
V rel
- Relative Luminous Intensity
green
IF = 10 mA
T
amb
- Ambient Temperature (°C)
20 40 60 800100
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10263
500
2.0
green
I
spec
- Specific Luminous Intensity
IF (mA)
0.5 0.2 0.1 0.05 0.021
t
p
/T
520 540 560 580600
0
0.2
0.4
0.6
0.8
1.2
620
95 10038
λ - Wavelength (nm)
1.0
green
I
rel
- Relative Intensity
Vishay Semiconductors
10
1
0.1
- Relative Luminous Intensity
V rel
I
95 10037
green
101
IF - Forward Current (mA)
100
Figure 15. Forward Current vs. Forward Voltage
Figure 16. Rel. Luminous Intensity vs. Ambient Temperature
Figure 18. Relative Luminous Intensity vs. Forward Current
Figure 19. Relative Intensity vs. Wavelength
Figure 17. Specific Luminous Intensity vs. Forward Current
www.vishay.com
6
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
Document Number 83053
Rev. 2.1, 23-Mar-11
Page 7
PACKAGE DIMENSIONS in millimeters
95 11262
Drawing-No.: 6.544-5052.01-4
Issue: 1; 12.10.95
Identification label:
355
90
30
48
45
52 max.
948641
Vishay/type/group/tape code/production code/quantity
TLUG240., TLUO240., TLUY240.
Vishay Semiconductors
REEL DIMENSIONS in millimeters TAPE
Document Number 83053
Rev. 2.1, 23-Mar-11
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Figure 20. Reel
Adhesive tape
Identification label
Tape
Reel
Paper
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
Diodes: anode before cathode
Phototransistors: emitter before collector
Code 21
Figure 21. LED in Tape
Diodes:
cathode before anode
Phototransistors:
collector before emitter
Code 12
www.vishay.com
94 8671
7
Page 8
TLUG240., TLUO240., TLUY240.
r
Vishay Semiconductors
AMMOPACK
Tape feed direction
Diodes: cathode before anode
Transistors: collector before emitter
Label
Tape feed direction
Diodes: anode before cathode
Transistors: emitter before collecto
94 8667-2
Figure 22. Tape Direction
Note:
The new nomenclature for ammopack is ASZ only, without suffix for
the LED orientation. The carton box has to be turned to the desired
position: “+” for anode first, or “-“ for cathode first. AS12Z and AS21Z
are still valid for already existing types, BUT NOT FOR NEW
DESIGN.
TAPE DIMENSIONS in millimeters
± 0.2
0.3
± 0.5
± 0.3
+ 1
- 0.5
18
9
12
2.54
Quantity per:
94 8171
Ø 4
+ 0.6
5.08
± 1
- 0.1
± 0.2
± 0.7
12.7
± 1
12.7
“H”
± 0.7
6.35
± 0.2
Measure limit over 20 index-holes: ± 1
Reel
(Mat. - No. 1764)
2000
± 2
0.9 max.
Option Dim. “H” ± 0.5 mm
AS 17.3
MS 25.5
www.vishay.com
8
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
This datasheet is subject to change without notice.
Document Number 83053
Rev. 2.1, 23-Mar-11
Page 9
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Loading...