Vishay IRFI530G, SiHFI530G Data Sheet

Power MOSFET
IRFI530G, SiHFI530G
Vishay Siliconix
PRODUCT SUMMARY
VDS (V) 100
(Ω)V
R
DS(on)
Q
(Max.) (nC) 33
g
Q
(nC) 5.4
gs
Q
(nC) 15
gd
Configuration Single
TO-220 FULLPAK
= 10 V 0.16
GS
D
FEATURES
• Isolated Package
• Sink to Lead Creepage Distance = 4.8 mm
• 175
°C Operating Temperature
• Dynamic dV/dt Rating
• Low Thermal Resistance
• Lead (Pb)-free Available
DESCRIPTION
Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and
G
cost-effectiveness. The TO-220 FULLPAK eliminates the need for additional insulating hardware in commercial-industrial applications. The molding compound used provides a high isolation
S
D
G
N-Channel MOSFET
S
capability and a low thermal resistance between the tab and external heatsink. This isolation is equivalent to using a 100 micron mica barrier with standard TO-220 product. The FULLPAK is mounted to a heatsink using a single clip or by a single screw fixing.
ORDERING INFORMATION
Package TO-220 FULLPAK
Lead (Pb)-free
SnPb
IRFI530GPbF SiHFI530G-E3 IRFI530G SiHFI530G
(t = 60 s;
RMS
Available
RoHS*
COMPLIANT
ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted
PARAMETER SYMBOL LIMIT UNIT
Drain-Source Voltage V Gate-Source Voltage V
= 25 °C
T
Continuous Drain Current V
Pulsed Drain Current
a
at 10 V
GS
C
= 100 °C 6.9
C
DS
± 20
GS
I
D
IDM 39 Linear Derating Factor 0.28 W/°C Single Pulse Avalanche Energy Repetitive Avalanche Current Repetitive Avalanche Energy Maximum Power Dissipation T Peak Diode Recovery dV/dt Operating Junction and Storage Temperature Range T
b
a
a
= 25 °C P
c
C
E
AS
I
AR
E
AR
D
dV/dt 5.5 V/ns
, T
J
stg
Soldering Recommendations (Peak Temperature) for 10 s 300
Mounting Torque 6-32 or M3 screw
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
= 25 V, starting TJ = 25 °C, L = 1.6 mH, RG = 25 Ω, IAS = 9.7 A (see fig. 12).
b. V
DD
c. I
9.7 A, dI/dt 140 A/µs, VDD VDS, TJ 175 °C.
SD
d. 1.6 mm from case.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 90180 www.vishay.com S-82995-Rev. A, 12-Jan-09 1
100
9.7
100 mJ
9.7 A
4.2 mJ 42 W
- 55 to + 175
d
10 lbf · in
1.1 N · m
V
AT
°C
IRFI530G, SiHFI530G
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER SYMBOL TYP. MAX. UNIT
Maximum Junction-to-Ambient R
Maximum Junction-to-Case (Drain) R
thJA
thJC
SPECIFICATIONS TJ = 25 °C, unless otherwise noted
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Static
Drain-Source Breakdown Voltage V
Temperature Coefficient ΔVDS/TJ Reference to 25 °C, ID = 1 mA - 0.12 - V/°C
V
DS
Gate-Source Threshold Voltage V
Gate-Source Leakage I
Zero Gate Voltage Drain Current I
Drain-Source On-State Resistance R
Forward Transconductance g
Dynamic
Input Capacitance C
Output Capacitance C
Reverse Transfer Capacitance C
Drain to Sink Capacitance C f = 1.0 MHz - 12 -
Total Gate Charge Q
Gate-Drain Charge Q
Turn-On Delay Time t
Rise Time t
Turn-Off Delay Time t
Fall Time t
Internal Drain Inductance L
Internal Source Inductance L
Drain-Source Body Diode Characteristics
Continuous Source-Drain Diode Current I
Pulsed Diode Forward Current
a
Body Diode Voltage V
Body Diode Reverse Recovery Time t
Body Diode Reverse Recovery Charge Q
Forward Turn-On Time t
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 µs; duty cycle 2 %.
DS
GS(th)
V
GSS
DSS
VGS = 10 V ID = 5.8 A
DS(on)
fs
iss
- 250 -
oss
-60-
rss
g
--5.4
gs
--15
gd
d(on)
r
-34-
d(off)
-25-
f
D
V
V
GS
Between lead, 6 mm (0.25") from package and center of
S
S
I
SM
SD
rr
rr
on
die contact
MOSFET symbol showing the integral reverse p - n junction diode
TJ = 25 °C, IF = 9.7 A, dI/dt = 100 A/µs
-65
-3.6
°C/W
VGS = 0 V, ID = 250 µA 100 - - V
VDS = VGS, ID = 250 µA 2.0 - 4.0 V
= ± 20 V - - ± 100 nA
GS
VDS = 100 V, VGS = 0 V - - 25
= 80 V, VGS = 0 V, TJ = 150 °C - - 250
DS
VDS = 50 V, ID = 5.8 A
VGS = 0 V,
V
= 25 V,
DS
f = 1.0 MHz, see fig. 5
b
b
- - 0.16 Ω
4.0 - - S
- 670 -
--33
= 9.7 A, VDS = 80 V,
I
= 10 V
D
see fig. 6 and 13
b
-8.6-
V
= 50 V, ID = 9.7 A,
DD
R
= 12 Ω, RD= 5.1 Ω,
G
see fig. 10
b
G
G
TJ = 25 °C, IS = 9.7 A, VGS = 0 V
D
S
D
S
b
-28-
-4.5-
-7.5-
--9.7
--39
--2.5V
- 150 280 ns
b
- 0.85 1.7 µC
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)
µA
pF
nC Gate-Source Charge Q
ns
nH
A
www.vishay.com Document Number: 90180 2 S-82995-Rev. A, 12-Jan-09
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
IRFI530G, SiHFI530G
Vishay Siliconix
Fig. 1 - Typical Output Characteristics, TC = 25 °C
Fig. 2 - Typical Output Characteristics, T
= 175 °C
C
Fig. 3 - Typical Transfer Characteristics
Fig. 4 - Normalized On-Resistance vs. Temperature
Document Number: 90180 www.vishay.com S-82995-Rev. A, 12-Jan-09 3
Loading...
+ 5 hidden pages