How it Works
Vishay
Loading...
Power Modules
Application Note
2 pgs73.27 Kb0
Selection Guide
12 pgs1.58 Mb0
Selection Guide
34 pgs2.51 Mb0

Vishay Power Modules Selection Guide

Download
VISHAY INTERTECHNOLOGY, INC.
FEATURED PRODUCTS
Standard Recovery Diode Modules
Fast Recovery Diode Modules
Schottky Modules
Ultrafast Modules
Thyristor Modules
IGBT Modules
SELECTOR GUIDE
Discrete Semiconductors and Passive Components
1/34
One of the World’s Largest Manufacturers of
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
TABLE OF CONTENTS
Standard Diode Modules ....................................................................................................03
• Standard Recovery Diode Modules - Single ...............................................................04
• Standard Recovery Diode Modules - Dual ..................................................................05
• Fast Recovery Diode Modules ..................................................................................... 06
Schottky Diode Modules ..................................................................................................... 07
• Schottky Diode Modules - Single (Not Isolated) ..........................................................07
• Schottky Diode Modules - Dual (Not Isolated) ............................................................. 08
• Schottky Diode Modules - Dual (Isolated)....................................................................10
Ultrafast Recovery Diode Modules......................................................................................12
• Ultrafast Diode Modules - FRED Pt
• Ultrafast Diode Modules - HEXFRED
®
............................................................................ 12
®
.........................................................................14
Thyristor Modules ................................................................................................................ 16
• Thyristor Modules - Single ...........................................................................................16
• Thyristor Modules - Dual .............................................................................................. 17
Bridge Rectifier Modules ..................................................................................................... 20
IGBT Modules .....................................................................................................................23
• Single-Switch IGBT Modules .......................................................................................26
• Chopper IGBT Modules ...............................................................................................27
• Half-Bridge IGBT Modules ........................................................................................... 28
• Full-Bridge IGBT Modules ............................................................................................ 30
• 4-PAK IGBT Modules ................................................................................................... 31
• 6-PAK Inverter IGBT Modules ...................................................................................... 31
• 3-Levels IGBT Modules ................................................................................................ 32
• Double Interleaved Boost ............................................................................................. 32
• Dual Forward IGBT Modules ........................................................................................33
• Primary rectifier and PFC Modules ..............................................................................33
SELECTOR GUIDE
2/34
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
Standard Diode Modules
Versatile and high-efficiency power diode and SCR modules from Vishay Intertechnology feature industry-standard outlines with a choice of diode and thyristor rectifiers. Offering single-rectifying/switch component, half-bridge, and center­tapped configurations, these modules are the ideal choice for input rectification applications at either low or high voltages.
Vishay modules fulfill a single or composite function within a single package that offers a thermally conductive, but electrically isolated, path to the outside circuit. This electrical isolation between the baseplate and the active semiconductors provides a key advantage over discrete components. The modules are RoHS-compliant and meet industry standards for safety, including UL approval.
State-of-the-art compression bonding (for current ratings higher than 250 A) and ultrasonic aluminum wire bonding technologies allow the modules to achieve outstanding performance. Vishay’s high-power modules are recognized throughout the world for their ruggedness, high reliability, and consistency of mechanical specifications and electrical characteristics.
Features
• Wide range of industry-standard package styles
• Direct mounting on heatsink
• Choice of rectifier and thyristor technologies
Options
• Customizable for specific application needs
• Gate and auxiliary cathode accessories available upon request
• Optimized high-voltage diode and SCR
• Fast recovery diode modules available
• High isolation voltage (2500 V)
• RoHS-compliant
• Low thermal resistance
• Low- / high-temperature performance (-40 °C to +175 °C)
• UL approved
Applications
• Single- and three-phase input rectification
• Industrial welding
• Switch mode power supplies
• Motor drives
• UPS
• Anti-parallel thyristors (AC switches)
Dimensions in Millimeters
26
12
38
SOT-227 Half-Pak
25
18
TO-244
27
(TO-244AB)
21
18
93
21
30
21
40
(D-67)
29
Int-A-Pak
SELECTOR GUIDE
41
T-Module
92
Add-A-Pak
(TO-240AA)
35
52
94
Magn-A-Pak
50
52
92
103
MAP Power Block
51
52
124
Super Magn-A-Pak
3/34
60
VMN-SG218 3 -1411
Standard Recovery Diode Modules - Single
-+
Device
-+
VSKET...HF
(8)
Package Pin Out
VISHAY INTERTECHNOLOGY, INC.
Power Diode Modules
I
V
RRM
Range (V)
at T
F(AV)
(A) (ºC) (V) (A)
C
Max VF at I
F
I
FSM
(A)
(4)
VS-T20HF220 T-Module
VS-T40HF10 to VS-T40HF120 T-Module
VS-T70HF10 to VS-T70HF120 T-Module
VS-T85HF10 to VS-T85HF120 T-Module
VS-T110HF10 to VS-T110HF120 T-Module
VS-VSKE56/04 to VS-VSKE56/16
VS-VSKE71/04 to VS-VSKE71/16
VS-VSKE91/04 to VS-VSKE91/16
VS-VSKE166/04PBF to
VS-VSKE166/16PBF
VS-VSKE196/04PBF to
VS-VSKE196/16PBF
VS-VSKE236/04PBF to
VS-VSKE236/16PBF
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Int-A-Pak
Int-A-Pak
Int-A-Pak
(1)
Screwable 2200 20 72 1.3 60 380
(1)
Screwable 100 to 1200 40 85 1.3 126 570
(1)
Screwable 100 to 1200 70 85 1.35 220 1200
(1)
Screwable 100 to 1200 85 85 1.27 267 1700
(1)
Screwable 100 to 1200 110 85 1.35 345 2000
(1)
Screwable 400 to 1600 60 114 1.6 188 1300
(1)
Screwable 400 to 1600 80 110 1.6 251 1500
(1)
Screwable 400 to 1600 100 112 1.55 314 2000
(1)
Screwable 400 to 1600 165 100 1.43 518 4000
(1)
Screwable 400 to 1600 195 100 1.38 612 4750
(1)
Screwable 400 to 1600 230 100 1.46 722 5500
VS-VSKE250-04PBF to
VS-VSKE250-20PBF
VS-VSKE270-04PBF to
VS-VSKE270-20PBF
VS-VSKE320-04PBF to
VS-VSKE320-20PBF
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
3. x = Circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration
SELECTOR GUIDE
Magn-A-Pak
Magn-A-Pak
Magn-A-Pak
D = Two diodes double circuit C = Two diodes common cathode J = Two diodes common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities
(1)
Screwable 400 to 2000 250 100 1.29 785 7015
(1)
Screwable 400 to 2000 270 100 1.48 848 8920
(1)
Screwable 400 to 2000 320 100 1.28 1005 10110
4/34
4. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max
VMN-SG218 3 -1411
Standard Recovery Diode Modules - Dual
~-
VISHAY INTERTECHNOLOGY, INC.
Power Diode Modules
VSMD...AVSMD...C
(3)
Device
VS-VSKx56/04 to VS-VSKx56/16
VS-VSKx71/04 to VS-VSKx71/16
VS-VSKx91/04 to VS-VSKx91/16
VSMD400AW60
VSMD400CW60
VS-VSKx166/04PBF to
VS-VSKx166/16PBF
VS-VSKx196/04PBF to
VS-VSKx196/16PBF
VS-VSKx236/04PBF to
VS-VSKx236/16PBF
--+
VSKC...
Package Pin Out
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
(1)
Int-A-Pak
(1)
Int-A-Pak
(1)
Int-A-Pak
+
- ++
VSKJ...VSKD...
I
at T
V
Range
RRM
(V)
Screwable 400 to 1600 60 114 1.6 188 1300
(1)
Screwable 400 to 1600 80 110 1.6 251 1500
(1)
Screwable 400 to 1600 100 112 1.55 314 2000
(1)
Screwable 600 200 133 1.31 200 2500
(2)
Screwable 600 200 133 1.31 200 2500
(2)
F(AV)
(A) (ºC) (V) (A)
C
Max VF at I
Screwable 400 to 1600 165 100 1.43 518 4000
Screwable 400 to 1600 195 100 1.38 612 4750
Screwable 400 to 1600 230 100 1.46 722 5500
F
(4)
I
FSM
(A)
VS-VSKx250-04PBF to
VS-VSKx250-20PBF
VS-VSKx270-04PBF to
VS-VSKx270-30PBF
VS-VSKx320-04PBF to
VS-VSKx320-20PBF
VS-VSKD600-04PBF to
VS-VSKD600-20PBF
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
3. x = Circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration
SELECTOR GUIDE
Super
(1)
Screwable 400 to 2000 250 100 1.29 785 7015
(1)
Screwable 400 to 3000 270 100 1.48 848 8920
(1)
Screwable 400 to 2000 320 100 1.28 1005 10 110
Screwable 400 to 2000 600 100 1.45 1800 19 000
(1)
Magn-A-Pak
Magn-A-Pak
Magn-A-Pak
Magn-A-Pak
D = Two diodes double circuit C = Two diodes common cathode J = Two diodes common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities
5/34
4. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max
VMN-SG218 3 -1411
Fast Recovery Diode Modules
-+
T...HFL
(B)
Device
Package Type Pin Out
V
RRM
Range (V)
VISHAY INTERTECHNOLOGY, INC.
Power Diode Modules
I
at
F(AV)
(A) (ºC) (V) (A) (ns) setup (I
Max VF
T
at I
C
Typ. trr at 25 ºC Typ. Qrr at 125 ºC
F
, diF / dt, VR) (nC)
F
VS-T40HFL20S02 to
VS-T40HFL60S02
VS-T40HFL20S05 to
VS-T40HFL100S05
VS-T70HFL20S02 to
VS-T70HFL60S02
VS-T70HFL10S05 to
VS-T70HFL100S05
VS-T85HFL10S02 to
VS-T85HFL60S02
VS-T85HFL20S05 to
VS-T85HFL100S05
T-Module
T-Module
T-Module
T-Module
T-Module
T-Module
(1)
(1)
(1)
(1)
(1)
(1)
Fast Soft Recovery
Fast Soft Recovery
Fast Soft Recovery
Fast Soft Recovery
Fast Soft Recovery
Fast Soft Recovery
Screwable 200 to 600 40 70 1.60 126 200 126 A, 25 A/µs, 30 V 550
Screwable 200 to 1000 40 70 1.60 126 500 126 A, 25 A/µs, 30 V 2000
Screwable 200 to 600 70 70 1.73 220 200 220 A, 25 A/µs, 30 V 600
Screwable 100 to 1000 70 70 1.73 220 500 220 A, 25 A/µs, 30 V 2100
Screwable 200 to 600 85 70 1.55 267 200 267 A, 25 A/µs, 30 V 800
Screwable 200 to 1000 85 70 1.55 267 500 267 A, 25 A/µs, 30 V 3500
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
6/34
VMN-SG218 3 -1411
Schottky Diode Modules - Single (Not Isolated)
-+
...NQ
VISHAY INTERTECHNOLOGY, INC.
Schottky Diode Modules
(B)
Device
Package Type Pin Out
VS-125NQ015PBF Half-Pak (D-67)
VS-122NQ030PBF Half-Pak (D-67)
VS-120NQ045PBF Half-Pak (D-67)
VS-121NQ045PBF Half-Pak (D-67)
VS-123NQ100PBF Half-Pak (D-67)
VS-182NQ030PBF Half-Pak (D-67)
VS-180NQ045PBF Half-Pak (D-67)
VS-183NQ100PBF Half-Pak (D-67)
VS-245NQ015PBF Half-Pak (D-67)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
I
at T
F(AV)
V
RRM
(V)
(A) (ºC) (V) (A)
(3)
C
Max. VF at I
(4)
F
I
FSM
(A)
Screwable 15 120 74 0.43 120 1700
Screwable 30 120 115 0.57 120 2000
Screwable 45 120 105 0.63 120 1550
Screwable 45 120 137 0.65 120 2000
Screwable 100 120 133 0.91 120 1800
Screwable 30 180 108 0.59 180 2500
Screwable 45 180 105 0.60 180 2400
Screwable 100 240 128 0.91 180 2500
Screwable 15 240 73 0.52 240 3000
(5)
VS-242NQ030PBF Half-Pak (D-67)
VS-240NQ045PBF Half-Pak (D-67)
VS-241NQ045PBF Half-Pak (D-67)
VS-243NQ100PBF Half-Pak (D-67)
VS-249NQ150PBF Half-Pak (D-67)
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
Single Diode
(2)
(Cathode to Base)
3. Per module
4. Tj = 25 ºC
5. 10 ms sine pulse, no voltage reapplied
7/34
Screwable 30 240 118 0.54 240 3000
Screwable 45 240 104 0.72 240 3400
Screwable 45 240 144 0.8 240 3450
Screwable 100 240 132 0.95 240 3300
Screwable 150 240 121 1.21 240 2300
VMN-SG218 3 -1411
Schottky Diode Modules - Dual (Not Isolated)
...CNQ
VISHAY INTERTECHNOLOGY, INC.
Schottky Diode Modules
(B)
Device
VS-220CNQ030PBF
VS-200CNQ045PBF
VS-201CNQ045PBF
VS-203CNQ100PBF
VS-209CNQ135PBF
VS-209CNQ150PBF
VS-300CNQ045PBF
VS-301CNQ040PBF
VS-301CNQ045PBF
Package Type Pin Out
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Screwable 30 220 122 0.59 220 1950
Screwable 45 200 116 0.73 200 1550
Screwable 45 200 146 0.81 200 2000
Screwable 100 200 142 1.03 200 1700
Screwable 135 200 131 1.33 200 1200
Screwable 150 200 131 1.33 200 1200
Screwable 45 300 111 0.77 300 2400
Screwable 40 300 132 0.9 300 3200
Screwable 45 300 132 0.9 300 3200
I
at T
F(AV)
V
RRM
(V)
(A) (ºC) (V) (A)
(3)
C
Max. VF at I
(4)
F
(5)
I
FSM
(A)
VS-303CNQ100PBF
VS-401CNQ040PBF
VS-400CNQ045PBF
VS-401CNQ045PBF
VS-403CNQ100PBF
VS-409CNQ135PBF
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
TO-244
(TO-244AB)
(2)
TO-244
(TO-244AB)
(2)
TO-244
(TO-244AB)
(2)
TO-244
(TO-244AB)
(2)
TO-244
(TO-244AB)
(2)
TO-244
(TO-244AB)
(2)
3. Per module
4. Tj = 25 ºC
5. 10 ms sine pulse, no voltage reapplied
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
8/34
Screwable 100 300 138 1.09 300 2500
Screwable 40 400 114 0.73 400 3400
Screwable 45 400 114 0.73 400 3400
Screwable 45 400 147 0.78 400 3450
Screwable 100 400 141 1.07 400 3300
Screwable 135 400 129 1.46 400 2300
VMN-SG218 3 -1411
Schottky Diode Modules - Dual (Not Isolated), continued
VISHAY INTERTECHNOLOGY, INC.
Schottky Diode Modules
(B)
Device
VS-409CNQ150PBF
VS-440CNQ030PBF
Package Type Pin Out
TO-244
(TO-244AB)
TO-244
(TO-244AB)
(2)
(2)
Dual Diode
(Common Cathode)
Dual Diode
(Common Cathode)
Screwable 150 400 129 1.46 400 2300
Screwable 30 440 125 0.63 440 3000
I
at T
F(AV)
V
RRM
(V)
(A) (ºC) (V) (A)
(3)
C
Max. VF at I
(4)
F
(5)
I
FSM
(A)
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
3. Per module
4. Tj = 25 ºC
5. 10 ms sine pulse, no voltage reapplied
9/34
VMN-SG218 3 -1411
Schottky Diode Modules - Dual (Isolated)
~
+
-
VISHAY INTERTECHNOLOGY, INC.
Schottky Diode Modules
+
-
-
-
+
+
VSKD... VSKC... VSKJ...
(B)
Device
VS-VSKDS201/045
VS-VSKCS201/045
VS-VSKDS203/100
VS-VSKCS203/100
VS-VSKJS203/100
VS-VSKDS209/150
VS-VSKCS209/150
Package Type Pin Out
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
(1)
Doubler Circuit
(1)
(Common Cathode)
Two Diodes
Two Diodes
(1)
Doubler Circuit
(1)
(Common Cathode)
(1)
(Common Anode)
Two Diodes
(1)
Doubler Circuit
(1)
(Common Cathode)
Dual Diode
Dual Diode
Dual Diode
Dual Diode
I
at T
F(AV)
V
RRM
(V)
(A) (ºC) (V) (A)
(3)
C
Max. VF at I
(4)
F
I
FSM
(A)
Screwable 45 200 123 1.04 200 1850
Screwable 45 200 123 1.04 200 1850
Screwable 100 200 121 1.34 200 1700
Screwable 100 200 121 1.34 200 1700
Screwable 100 200 121 1.34 200 1700
Screwable 150 200 113 1.35 200 1600
Screwable 150 200 113 1.35 200 1600
(5)
VS-VSKJS209/150
VS-VSKDS220/030
VS-VSKCS220/030
VS-VSKDS400/045
VS-VSKCS400/045
VS-VSKDS401/045
VS-VSKCS401/045
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
Add-A-Pak
(TO-240AA)
(1)
Add-A-Pak
(TO-240AA)
(1)
Add-A-Pak
(TO-240AA)
(1)
Add-A-Pak
(TO-240AA)
(1)
Add-A-Pak
(TO-240AA)
(1)
Add-A-Pak
(TO-240AA)
(1)
Add-A-Pak
(TO-240AA)
(1)
3. Per module
4. Tj = 25 ºC
5. 10 ms sine pulse, no voltage reapplied
Dual Diode
(Common Anode)
Two Diodes
Doubler Circuit
Dual Diode
(Common Cathode)
Two Diodes
Doubler Circuit
Dual Diode
(Common Cathode)
Two Diodes
Doubler Circuit
Dual Diode
(Common Cathode)
10/34
Screwable 150 200 113 1.35 200 1600
Screwable 30 220 110 0.78 220 2000
Screwable 30 220 110 0.78 220 2000
Screwable 45 400 91 0.92 400 3400
Screwable 45 400 91 0.92 400 3400
Screwable 45 400 120 0.98 400 3450
Screwable 45 400 120 0.98 400 3450
VMN-SG218 3 -1411
Schottky Diode Modules - Dual (Isolated), continued
VISHAY INTERTECHNOLOGY, INC.
Schottky Diode Modules
(B)
Device
VS-VSKDS408/060
VS-VSKCS408/060
VS-VSKDS403/100
VS-VSKCS403/100
VS-VSKDS409/150
VS-VSKCS440/030
VS-VSKJS440/030
Package Type Pin Out
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
Add-A-Pak
(TO-240AA)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
Two Diodes
Doubler Circuit
Dual Diode
(Common Cathode)
Two Diodes
Doubler Circuit
Dual Diode
(Common Cathode)
Two Diodes
Doubler Circuit
Dual Diode
(Common Cathode)
Dual Diode
(Common Anode)
Screwable 60 400 102 1.09 400 3300
Screwable 60 400 102 1.09 400 3300
Screwable 100 400 111 1.3 400 3300
Screwable 100 400 111 1.30 400 3300
Screwable 150 400 105 1.33 400 2300
Screwable 30 440 97 1.00 440 3000
Screwable 30 440 97 1.00 440 3000
I
at T
F(AV)
V
RRM
(V)
(A) (ºC) (V) (A)
(3)
C
Max. VF at I
(4)
F
(5)
I
FSM
(A)
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
3. Per module
4. Tj = 25 ºC
5. 10 ms sine pulse, no voltage reapplied
11/ 34
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
Ultrafast Recovery Diode Modules
Ultrafast Diode Modules - FRED Pt
UF....FA UF....CB VSUD....CW
(B)
Device
VS-UFB80FA20 SOT-227
VS-UFB80FA40 SOT-227
VS-UFB80FA60 SOT-227
VS-UFL80FA60 SOT-227
VS-UFB130FA20 SOT-227
VS-UFB130FA40 SOT-227
VS-UFB130FA60 SOT-227
VS-UFL130FA60 SOT-227
VS-UFB170FA60 SOT-227
VS-UFB201FA40 SOT-227
VS-UFB280FA20 SOT-227
VS-UFB280FA40 SOT-227
Package Type Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
®
I
at
Max. VF at
F(AV)
(3)
V
T
C
RRM
(V)
(A) (ºC) (V) (A) (ns) setup (I
Screwable 200 80 129 1.08 30 34
Screwable 400 80 121 1.39 30 68
Screwable 600 80 104 1.69 30 79
Screwable 600 80 115 1.43 30 115
Screwable 200 130 126 1.13 60 42
Screwable 400 130 114 1.37 60 86
Screwable 600 130 92 1.80 60 79
Screwable 600 130 98 1.60 60 105
Screwable 600 170 76 1.43 100 220
Screwable 400 200 86 1.28 100 80
Screwable 200 280 100 1.10 120 34
Screwable 400 280 90 1.24 100 93
Typ. trr at 25 ºC Typ. Qrr at 125 ºC
(4)
I
F
, diF / dt, VR) (nC)
F
30 A, 200 A/µs, 100 V
30 A, 200 A/µs, 200 V
30 A, 200 A/µs, 200 V
30 A, 200 A/µs, 200 V
50 A, 200 A/µs, 100 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 500 A/us, 200 V
50 A, 200 A/µs, 200 V
150 A, 200 A/µs, 160 V
150 A, 200 A/µs, 200 V
184
900
1085
1900
295
1400
1220
1850
9100
1300
300
1740
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
3. Per module
4. Tj = 25 ºC
5. Very low thermal resistance
12/ 34
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
Ultrafast Recovery Diode Modules
Ultrafast Diode Modules - FRED Pt
(B)
Device
VS-UFB210FA40
Package Type Pin Out
(5)
SOT-227
VS-UFB230FA60 SOT-227
VS-UFL230FA60 SOT-227
VS-UFB250FA60 SOT-227
VS-UFB310CB40
VS-UFL250CB60
VS-VSUD360CW40
SOT-227
SOT-227
TO-244
(TO-244AB)
®
, continued
Two Separated
(1)
Diodes, Parallel
Two Separated
(1)
Diodes, Parallel
Two Separated
(1)
Diodes, Parallel
Two Separated
(1)
Diodes, Parallel
two separated
(2)
diodes , common
Not isolated: two
(2)
separated diodes,
common cathode
(2)
(Common Cathode)
Pin Out
Pin Out
Pin Out
Pin Out
Not isolated:
cathode
Dual Diode
I
at
Max. VF at
F(AV)
(3)
V
T
C
RRM
(V)
(A) (ºC) (V) (A) (ns) setup (I
Screwable 400 210 133 1.24 100 93
Screwable 600 230 88 1.78 100 83
Screwable 600 230 102 1.44 100 104
Screwable 600 250 113 1.19 100 166
Typ. trr at 25 ºC Typ. Qrr at 125 ºC
(4)
I
F
, diF / dt, VR) (nC)
F
150 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 500 A/µs, 200 V
1740
1595
2200
10 000
(150 °C)
Screwable 400 310 119 1.34 100 89 50 A, 200 A/us, 200 V 1840
Screwable 600 250 119 1.44 100 104 50 A, 200 A/us, 200 V 2200
Screwable 400 360 116 1.50 360 74 180 A, 200 A/µs, 200 V
1295
(150 °C)
VS-VSUD400CW60
VS-VSUD405CW60
VS-VSUD410CW60
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
Dual Diode
(2)
(Common Cathode)
Dual Diode
(2)
(Common
Cathode)
Dual Diode
(2)
(Common
Cathode)
3. Per module
4. Tj = 25 ºC
5. Very low thermal resistance
Screwable 600 400 97 2.30 400 90 200 A, 200 A/µs, 200 V 4730
Screwable 600 400 132 1.72 400 124
Screwable 600 400 85 1.37 400 215
50 A, 500 A/μs, 200 V
50 A, 500 A/μs, 200 V
5000
15 100
SELECTOR GUIDE
13/34
VMN-SG218 3 -1411
-
~
VISHAY INTERTECHNOLOGY, INC.
Ultrafast Recovery Diode Modules
Ultrafast Diode Modules - HEXFRED
HFA....FA HFA....EA HFA....NH
(B)
Device
VS-HFA70FA120 SOT-227
VS-HFA70EA120 SOT-227
VS-HFA90FA120 SOT-227
VS-HFA140FA60 SOT-227
VS-HFA140FA120 SOT-227
VS-HFA220FA120 SOT-227
VS-HFA90NH40PBF
Package Type Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Anti-
Parallel Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Two Separated
(1)
Diodes, Parallel
Pin Out
Half-Pak
(D-67)
Single Diode
(2)
(Cathode to Base)
®
HFA....EA VSKDU... VSKCU...
I
at
F(AV)
(3)
V
T
C
RRM
(V)
(A) (ºC) (V) (A) (ns) setup (I
Screwable 1200 70 94 3.80 60 134
Screwable 1200 70 121 4.00 60 145
Screwable 1200 90 63 3.30 40 80
Screwable 600 140 110 2.04 120 90
Screwable 1200 140 74 5.03 120 145
Screwable 1200 220 68 4.70 200 157
Screwable 400 106 100 1.45 90 90 90 A, 200 A/µs, 200 V 1200
Max. VF at
(4)
I
F
+
+
-
-
Typ. trr at 25 ºC Typ. Qrr at 125 ºC
, diF / dt, VR) (nC)
F
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
50 A, 200 A/µs, 200 V
1770
1920
740
1180
1920
2850
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
VS-HFA135NH40PBF
VS-HFA180NH40PBF
VS-HFA140NJ60CPBF
VS-HFA210NJ60CPBF
VS-HFA240NJ40CPBF
VS-HFA280NJ60CPBF
Half-Pak
(2)
(D-67)
Half-Pak
(2)
(D-67)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
TO-244
(TO-244AB)
Single Diode
(Cathode to Base)
Single Diode
(Cathode to Base)
Dual Diode
(2)
(Common Cathode)
Dual Diode
(2)
(Common Cathode)
Dual Diode
(2)
(Common Cathode)
Dual Diode
(2)
(Common Cathode)
3. Per module
4. Tj = 25 ºC
5. Very low thermal resistance
Screwable 400 138 100 1.65 135 77 135 A, 200 A/µs, 200 V 2800
Screwable 400 200 100 1.46 180 90 135 A, 200 A/µs, 200 V 2650
Screwable 600 168 100 2.10 140 80 70 A, 200 A/µs, 200 V 980
Screwable 600 240 100 2.25 210 90 105 A, 200 A/µs, 200 V 1200
Screwable 400 394 100 1.50 240 77 140 A, 200 A/µs, 200 V 2300
Screwable 600 298 100 2.10 210 92 105 A, 200 A/µs, 200 V 1400
14/ 34
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
Ultrafast Recovery Diode Modules
Ultrafast Diode Modules - HEXFRED
(B)
Device
VS-HFA320NJ40CPBF
Package Type Pin Out
TO-244
(TO-244AB)
VS-VSKDU162/12PBF Int-A-Pak
VS-VSKCU300/06PBF Int-A-Pak
VS-VSKDU300/06PBF Int-A-Pak
®
, continued
(2)
(Common Cathode)
(1)
Doubler Circuit
(1)
Common Cathode
(1)
Doubler Circuit
Dual Diode
Two Diodes
Two Diodes
Two Diodes
I
at
Max. VF at
F(AV)
(3)
V
T
C
RRM
(V)
(A) (ºC) (V) (A) (ns) setup (I
Typ. trr at 25 ºC Typ. Qrr at 125 ºC
(4)
I
F
, diF / dt, VR) (nC)
F
Screwable 400 320 115 1.54 320 90 160 A, 200 A/µs, 200 V 2600
Screwable 1200 110 100 3.90 160 150
Screwable 600 230 100 1.96 300 130
Screwable 600 230 100 1.96 300 130
160 A, 200A/µs, 200 V
50 A, 200 A/µs, 400 V
50 A, 200 A/µs, 400 V
2000
(25°C)
1800
1800
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
SELECTOR GUIDE
3. Per module
4. Tj = 25 ºC
5. Very low thermal resistance
15/34
VMN-SG218 3 -1411
Thyristor Modules - Single
(+)
VISHAY INTERTECHNOLOGY, INC.
Thyristor Modules
(-)
VSKS...
(3)
F
(4)
I
FSM
(A)
(B)
Device
VS-VSKS500/08PbF
VS-VSKS425/16PbF
(5)
Package Type Pin Out
MAP Power
Block
MAP Power
Block
Single Thyristor Screwable 800 500 76 1.1 500 16 646
(1)
Single Thyristor Screwable 1600 425 81 1.27 500 10650
(1)
V
(V)
RRM
I
at TCMax. VF at I
F(AV)
(A) (ºC) (V) (A)
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
3. Tj = 25 ºC
4. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max
5. Under development
SELECTOR GUIDE
16/34
VMN-SG218 3 -1411
Thyristor Modules - Dual
K1 K2 G2G1
+
-
K2 G2
~
+
-
K1G1
~
+
+
K1G1
-
+
-
K2 G2
~
K1G1
~
+
+
K1G1
-
+
-
K2 G2
~
K1G1
~
+
+
K1G1
-
K2 G2
~
+
+
K1G1
-
K1 K2 G2G1
+
+
+
K1 K2 G2G1
-
K1 K2 G2G1
-
~
VISHAY INTERTECHNOLOGY, INC.
Thyristor Modules
+
-
VSKT...
Device
VS-VSKx26/04 to
VS-VSKx26/16
VS-VSKx41/04 to
VS-VSKx41/16
VS-VSKx41/04 to
VS-VSKx41/16
VS-VSKx56/04 to
VS-VSKx56/16
VS-VSKx56/04 to
VS-VSKx56/16
VS-VSKx71/04 to
VS-VSKx71/16
VS-VSKx71/04 to
VS-VSKx71/16
VS-VSKx91/04 to
VS-VSKx91/16
VS-VSKx91/04 to
VS-VSKx91/16
+
-
VSKH...
(B)(3)
+
-
VSKL...
+
-
VSKN...
-
-
VSKU...
Package Type Pin Out
Thyristor/Diode
Add-A-Pak
(TO-240AA)
(1)
and Thyristor/ Thyristor Half-
Bridge
Thyristor/Diode
Add-A-Pak
(TO-240AA)
(1)
and Thyristor/ Thyristor Half-
Bridge
Add-A-Pak
(TO-240AA)
Common Anode
(1)
(Cathode)
Thyristor/Diode
Add-A-Pak
(TO-240AA)
(1)
and Thyristor/ Thyristor Half-
Bridge
Add-A-Pak
(TO-240AA)
Common Anode
(1)
(Cathode)
Thyristor/Diode
Add-A-Pak
(TO-240AA)
(1)
and Thyristor/ Thyristor Half-
Bridge
Add-A-Pak
(TO-240AA)
Common Anode
(1)
(Cathode)
Thyristor/Diode
Add-A-Pak
(TO-240AA)
(1)
and Thyristor/ Thyristor Half-
Bridge
Add-A-Pak
(TO-240AA)
Common Anode
(1)
(Cathode)
+
+
VSKU...
V
(V)
RRM
I
at TCMax. VF at I
F(AV)
(A) (ºC) (V) (A)
(4)
F
I
FSM
(A)
Screwable 400 to 1600 27 85 1.65 85 400
Screwable 400 to 1600 45 85 1.81 141 850
Screwable 400 to 1600 45 85 1.81 141 850
Screwable 400 to 1600 60 85 1.70 188 1200
Screwable 400 to 1600 60 85 1.70 188 1200
Screwable 400 to 1600 75 85 1.72 236 1300
Screwable 400 to 1600 75 85 1.72 236 1300
Screwable 400 to 1600 95 85 1.73 298 2000
Screwable 400 to 1600 95 85 1.73 298 2000
(5)
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
3. x = circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration. – Thyristor/diode and thyristor/thyristor half-bridge configurations: T = half-bridge fully controlled; h = half-bridge positive controlled; L = half-bridge negative controlled; n = half-bridge, half-controlled common anode – common anode or common cathode configuration: U = Dual ScR common cathode; V = Dual ScR common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities.
4. Tj = 25 ºC
5. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max
SELECTOR GUIDE
17/34
VMN-SG218 3 -1411
Thyristor Modules - Dual, continued
VISHAY INTERTECHNOLOGY, INC.
Thyristor Modules
(B)(3)
Device
VS-VSKx105/04 to
VS-VSKx105/16
VS-VSKx105/04 to
VS-VSKx105/16
VS-VSKx136/04PBF to
VS-VSKx136/16PBF
VS-VSKx142/04PBF to
VS-VSKx142/16PBF
VS-VSKx162/04PBF to
VS-VSKx162/16PBF
VS-VSKx170-04PBF to
VS-VSKx170-16PBF
VS-VSKx230-04PBF to
VS-VSKx230-20PBF
Package Type Pin Out
Thyristor/Diode
Add-A-Pak
(TO-240AA)
(1)
and Thyristor/ Thyristor Half-
Screwable 400 to 1600 105 85 1.80 330 2000
Bridge
Add-A-Pak
(TO-240AA)
Common Anode
(1)
(Cathode)
Screwable 400 to 1600 105 85 1.80 330 2000
Thyristor/Diode
Int-A-Pak
(1)
Thyristor Half-
Screwable 400 to 1600 135 85 1.57 424 3200
and Thyristor/
Bridge
Thyristor/Diode
Int-A-Pak
(1)
Thyristor Half-
Screwable 400 to 1600 140 85 1.55 440 4500
and Thyristor/
Bridge
Thyristor/Diode
Int-A-Pak
(1)
Thyristor Half-
Screwable 400 to 1600 160 85 1.54 502 4870
and Thyristor/
Bridge
Thyristor/Diode
Magn-A-Pak
(1)
Thyristor Half-
Screwable 400 to 1600 170 85 1.60 534 5100
and Thyristor/
Bridge
Thyristor/Diode
Magn-A-Pak
(1)
Thyristor Half-
Screwable 400 to 2000 230 85 1.59 722 7500
and Thyristor/
Bridge
I
at TCMax. VF at I
V
RRM
(V)
F(AV)
(A) (ºC) (V) (A)
(4)
F
(5)
I
FSM
(A)
VS-VSKV230-08PBF Magn-A-Pak
(1)
Common Anode Screwable 800 230 85 1.59 722 7500
Thyristor/Diode
VS-VSKx250-04PBF to
VS-VSKx250-20PBF
Magn-A-Pak
(1)
and Thyristor/ Thyristor Half-
Screwable 400 to 2000 250 85 1.44 785 8500
Bridge
VS-VSKT320-08PBF to
VS-VSKT320-16PBF
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
3. x = circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration. – Thyristor/diode and thyristor/thyristor half-bridge configurations: T = half-bridge fully controlled; h = half-bridge positive controlled; L = half-bridge negative controlled; n = half-bridge, half-controlled common anode – common anode or common cathode configuration: U = Dual ScR common cathode; V = Dual ScR common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities.
4. Tj = 25 ºC
5. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max
Magn-A-Pak
SELECTOR GUIDE
Thyristor/Thyristor
(1)
Half Bridge
Screwable 800 to 1600 320 70 1.37 1005 9000
18/34
VMN-SG218 3 -1411
Thyristor Modules - Dual, continued
VISHAY INTERTECHNOLOGY, INC.
Thyristor Modules
(B)(3)
Device
VS-VSKx430-16PBF to
VS-VSKx430-20PBF
VS-VSKx500-08PBF to
VS-VSKx500-16PBF
VS-VSKT570-16PBF
VS-VSKT570-18PBF
Package Type Pin Out
Thyristor/Diode
(1)
and Thyristor/ Thyristor Half-
Screwable 1600 to 2000 430 82 1.65 1350 15 700
Super
Magn-A-Pak
Bridge
Thyristor/Diode
(1)
and Thyristor/ Thyristor Half-
Screwable 800 to 1600 500 82 1.50 1570 17 800
Super
Magn-A-Pak
Bridge
Super
Magn-A-Pak
Super
Magn-A-Pak
Thyristor/
Thyristor Half-
(1)
Bridge
Thyristor/Thyristor
(1)
Half-Bridge
Screwable 1600 570 85 1.36 1500 18 800
Screwable 1800 570 74 1.50 1790 17 800
V
(V)
RRM
I
at TCMax. VF at I
F(AV)
(A) (ºC) (V) (A)
(4)
F
(5)
I
FSM
(A)
Note: B. Bold indicates new product
1. Isolated package
2. Not isolated package
3. x = circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration. – Thyristor/diode and thyristor/thyristor half-bridge configurations: T = half-bridge fully controlled; h = half-bridge positive controlled; L = half-bridge negative controlled; n = half-bridge, half-controlled common anode – common anode or common cathode configuration: U = Dual ScR common cathode; V = Dual ScR common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities.
4. Tj = 25 ºC
5. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max
SELECTOR GUIDE
19/34
VMN-SG218 3 -1411
63.5
32.5
15.5
63.5
32.5
16
94
35
30
VISHAY INTERTECHNOLOGY, INC.
Bridge Rectifier Modules
Versatile and high-efficiency bridge modules from Vishay Intertechnology feature industry-standard outlines with a choice of single-phase and three-phase rectifying bridges. The modules are the ideal choice for input rectification applications at either low or high voltages, with the electrical isolation between the baseplate and the active semiconductors providing a key advantage over discrete components. External electrical connections are provided with a choice of different terminal option, including fast-on, solderable pins, and bolt-down.
Vishay high-power bridge modules are RoHS-compliant and meet industry standards for safety, including UL approval. The devices are recognized throughout the world for their ruggedness, high reliability, and consistency of mechanical specifications and electrical characteristics.
Features
• Wide range of package styles and configurations with diode and / or thyristor technologies
• Direct mounting on heatsink
• Compact case styles for screw, solderable pin, and fast-on plug terminations
• PressFit pins NOW available on MTP package
• High isolation voltage: up to 4000 V
• RoHS-compliant
• Low thermal resistance
• UL approval
• High surge current: up to 1880 A
Dimensions in Millimeters
MTK
30
35
94
MTP (Solderable Pins) Pace-Pak
32.5
Options
• Customizable for specific application needs
• Temperature sensor available in some package styles
Applications
• Single- and three-phase input rectification
15.5
63.5
63.5
16
32.5
MTP (PressFit pins)
32.5
SELECTOR GUIDE
63.5
17
VMN-SG218 3 -1411
20/34
Bridge Rectifier Modules
VISHAY INTERTECHNOLOGY, INC.
Bridge Rectifier Modules
(1)
Device
40MT160KPBF
53MT80KPBF to
53MT160KPBF
51MT80KPBF to
51MT160KPBF
52MT80KPBF to
52MT160KPBF
60MT80KPBF to
60MT160KPBF
70MT80KPBF to
70MT160KPBF
93MT80KPBF to
93MT160KPBF
113MT80KPBF to
113MT160KPBF
91MT80KPBF to
91MT160KPBF
Package Type
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
MTK
(Screwable)
Three-Phase Bridge 40 1600 2.0 100
Full-Controlled
Three-Phase Bridge
Negative Half-Controlled
Three-Phase Bridge
Positive Half-Controlled
Three-Phase Bridge
Three-Phase Bridge 60 800 to 1600 1.75 100
Three-Phase Bridge 70 800 to 1600 1.6 100
Full-Controlled
Three-Phase Bridge
Full-Controlled
Three-Phase Bridge
Negative Half-Controlled
Three-Phase Bridge
Max. V
at I
I
F(AV)
(A)
V
Range
(BR)
(V)
F
(V) (A)
55 800 to 1600 2.68 150
55 800 to 1600 2.68 150
55 800 to 1600 2.68 150
90 800 to 1600 1.65 150
90 800 to 1600 1.57 150
90 800 to 1600 1.65 150
(2)
F
111MT80KPBF to
111MT160KPBF
(Screwable)
92MT80KPBF to
92MT160KPBF
(Screwable)
112MT80KPBF to
112MT160KPBF
(Screwable)
90MT80KPBF to
90MT160KPBF
(Screwable)
104MT80KPBF to
104MT160KPBF
(Screwable)
110MT80KPBF to
110MT160KPBF
(Screwable)
130MT80KPBF to
130MT160KPBF
(Screwable)
160MT80KPBF to
160MT160KPBF
Note:
1. Bold indicates new product
2. VF limits are per diode
3. Voltage suppressor available (identified by suffix “K”)
(Screwable)
MTK
MTK
MTK
MTK
MTK
MTK
MTK
MTK
Negative Half-Controlled
Three-Phase Bridge
Positive Half-Controlled
Three-Phase Bridge
Positive Half-Controlled
Three-Phase Bridge
90 800 to 1600 1.57 150
90 800 to 1600 1.65 150
90 800 to 1600 1.57 150
Three-Phase Bridge 90 800 to 1600 1.6 150
Three-Phase AC Switch 100 800 to 1600 1.53 150
Three-Phase Bridge 110 800 to 1600 1.4 150
Three-Phase Bridge 130 800 to 1600 1.63 200
Three-Phase Bridge 160 800 to 1600 1.49 200
4. With both voltage suppression and freewheeling diode available (idenitied by suffix “KW”)
SELECTOR GUIDE
21/34
VMN-SG218 3 -1411
Bridge Rectifier Modules, continued
(1)
Device
Package Type
VISHAY INTERTECHNOLOGY, INC.
Bridge Rectifier Modules
I
F(AV)
(A)
V
Range
(BR)
(V)
Max. V
(V) (A)
at I
F
(2)
F
200MT40KPBF
40MT160PBPBF and
40MT160PAPBF
70MT160PBPBF and
70MT160PAPBF
100MT160PBPBF and
100MT160PAPBF
VS-40MT160P-P
VS-70MT160P-P
VS-100MT160P-P
P101 to P105
(3)(4)
P131 to P135
P121 to P125
P431 to P435
MTK
(Screwable)
MTP Solderable
Pins
MTP Solderable
Pins
MTP Solderable
Pins
MTP
(PressFit pins)
MTP
(PressFit pins)
MTP
(PressFit pins)
PACE-PAK
(D-19)
PACE-PAK
(D-19)
PACE-PAK
(D-19)
PACE-PAK
(D-19)
Three-Phase Bridge 200 400 1.4 200
Three-Phase Bridge 45 1600 1.45 40
Three-Phase Bridge 75 1600 1.45 70
Three-Phase Bridge 75 1600 1.51 100
Three-Phase Bridge
Three-Phase Bridge
Three-Phase Bridge
Single-Phase Semi-Controlled
Bridge Common Cathode
Single-Phase
Fully-Controlled Bridge
Single-Phase Semi-Controlled
Bridge Doubler
Single-Phase
Fully-Controlled Bridge
45 1600 1.45 40
75 1600 1.45 70
100 1600 1.51 100
25 400 to 1200 1.35 79
25 400 to 1200 1.35 79
25 400 to 1200 1.35 79
40 400 to 1200 1.4 126
P421 to P425
P401 to P405
Note:
1. Bold indicates new product
2. VF limits are per diode
3. Voltage suppressor available (identified by suffix “K”)
(3)(4)
SELECTOR GUIDE
PACE-PAK
(D-19)
PACE-PAK
(D-19)
Single-Phase Semi-Controlled
Bridge Doubler
Single-Phase Semi-Controlled
Bridge Common Cathode
4. With both voltage suppression and freewheeling diode available (idenitied by suffix “KW”)
22/34
40 400 to 1200 1.4 126
40 400 to 1200 1.4 126
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
High-efficiency IGBT modules from Vishay Intertechnology feature industry-standard outlines with a choice of PT, NPT, and Trench IGBT technologies. Configured as single switches, inverters, choppers, half-bridges, or in custom configurations, these modules are the ideal choice for high-frequency power applications that demand high-efficiency performance. They are designed for use as a main switching device in switch mode power supplies, uninterruptible power supplies, industrial welding, motor drives, and power factor correction systems. Typical applications include boost and buck converters, forward and double forward converters, half bridges, full bridges (H-bridge), and three-phase bridges. Low thermal resistance allows Vishay IGBT modules to operate at higher case temperatures while maintaining the operating junction temperature within safe limits. Electrically isolated from the circuit, the base plate is exposed, allowing for direct mounting to the heat sink. With improved current sharing and lower operating junction temperatures, designers can now achieve higher system reliability. Vishay IGBT modules are RoHS-compliant and meet industry standards for safety including UL approval.
Features
• Wide range of industry-standard package styles
• Direct mount on heat sink
• Choice of PT, NPT, and Trench IGBT technologies
• Low-V
CE(on)
IGBT
• Switching frequency from 1 kHz to 150 kHz
• Optimized anti-parallel ultrafast diode with soft recovery characteristics
• Rugged transient performance
• High isolation voltage up to 3500 V
• 100 % lead (Pb)-free and RoHS-compliant
• Low thermal resistance
• Wide operating temperature range (-40 °C to +175 °C)
• UL-approved
• PressFit pins technology now available on selected packages
• Gradually introducing modules using proprietary Vishay 600 V and 650 V IGBT silicon (Trench PT and Trench Field-Stop technologies)
Dimensions in Millimeters
8
Int-A-Pak
29
SIP
22
62
Int-A-Pak (New) EMIPAK-1B EMIPAK-2B
35
12
SOP-227
26
38
34
30
Options
• Short-circuit capability available on many configurations
• Optional SMD integrated thermistor
• Customizable for specific application needs
• Automotive products upon request
Applications
• Industrial high-frequency welding
• Switch mode power supplies
• Uninterruptible power supplies
• Motor drives
• Power factor correction
• Solar inverters
MTP
16
12
32
63
27
EMIPAK2
17
12
58
62
57
Dual Int-A-Pak
30
SELECTOR GUIDE
94
Dual Int-A-Pak
62
106
Low Profile
17
108
94
Econo2
62
17
23/34
108
63
X-MAP
45
17
63
62
152
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
Product
Package
Model
SIP 62 x 22 x 8 Solderable Pins
SOT-227 38 x 26 x 12 Screwable
MTP 63 x 32 x 16
EMIPAK2 62 x 58 x 17 Solderable
EMIPAK-1B 63 x 34 x 12 PressFit
EMIPAK-2B 63 x 57 x 12 PressFit
IAP
(Int-A-Pak)
IAP
(Int-A-Pak) New
ECONO2 108 x 45 x 17
Max
Dimensions
L x W x H (mm)
94 x 35 x 29 Screwable
94x34x30 Screwable
Pin-Out
Screwable
(PressFit Coming Soon)
Screwable
(PressFit Coming Soon)
Circuit configuration
Available
6PAK Inverter
Customized
Configuration
Single Switch
Chopper
Customized
Configuration
Half Bridge
Full Bridge
Dual Forward
Primary Rectifier
and PFC
Customized
Configuration
Dual Mode PFC
Three Levels Half
Bridge Inverter
Customized
Configuration
Neutral Point Clamp
Topology
Customized
Configurations
Double Interleaved
Boost Converter
3-Levels Half-Bridge
Inverter
Customized
Configurations
Half Bridge
Single Switch
Customized
Configuration
Single Switch
Half Bridge
Chooper
Customized
Configuration
4PAK
Customized
Configuration
Voltage Range
(V)
600 8 to 30 1 to 60
600 to 1200 50 to 200 DC to 150
600 to 1200 up to 100 up to 60
600 up to 60 up to 150
600-1200 up to 55 up to 80
600-1200 up to 160 up to 80
600 to 1200 100 to 20 DC to 60
600 to 1200 up to 100 up to 60
600 to 1200 up to 100 uo tp 60
Current Ratings
at 25 ºC (A)
Frequency
Speed Grade
(kHz)
SELECTOR GUIDE
24/34
VMN-SG218 3 -1411
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
Product
Package
Model
DIAP
(Dual Int-A-Pak)
DIAP LP
(Dual Int-A-Pak
Low Profile)
X-MAP 152 x 62 x 17 Screwable / Solderable
Max
Dimensions
L x W x H (mm)
106 x 62 x 30 Screwable
108 x 62 x 17 Screwable
Pin-Out
Circuit configuration
Available
Single Switch
Half Bridge
Chopper
Customized
Configuration
Half Bridge
Three Levels Inverter
Customized
Configuration
Half Bridge
Customized
Configuration
Voltage Range
(V)
600 to 1200 up to 100
600 up to 750 up to 30
1200 up to 620 4 to 30
Current Ratings
at 25 ºC (A)
Frequency
Speed Grade
(kHz)
up to 60
SELECTOR GUIDE
25/34
VMN-SG218 3 -1411
Single-Switch IGBT Modules
Single-Switch No Diode Single-Switch with Diode
(B)
Device
VS-GB90DA120U SOT-227
VS-GB90SA120U SOT-227
VS-GB90DA60U SOT-227
VS-GT140DA60U SOT-227
VS-GT175DA120U SOT-227
VS-GA200SA60UP SOT-227
VS-GP250SA60S
VS-GA250SA60S SOT-227
VS-GB300AH120N
VS-GB400AH120N
VS-GB600AH120N
Package Circuit Pin Out
Single-Switch
with Diode
Single-Switch
No Diode
Single-Switch
with Diode
Single-Switch
with Diode
Single-Switch
with Diode
Single-Switch
No Diode
(1)
SOT-227
Single-Switch
No Diode
Single-Switch
No Diode
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Single-Switch
with Diode
Single-Switch
with Diode
Single Switch
with Diode
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
V
at
I
at T
V
(V)
CES
IC at 25 ºC
(A)
C
(A) (ºC)
Screwable 1200 149 90 90 3.30 5.8 8 to 60
Screwable 1200 149 90 90 3.30 5.8 8 to 60
Screwable 600 147 90 90 2.40 1.76 up to 150
Screwable 600 200 140 90 1.70 2.55 4 to 30
Screwable 1200 288 175 90 1.73 15.7 4 to 30
Screwable 600 200 100 100 1.60 6.5 up to 40
Screwable 600 370 245 90 1.01 17.7 up to 5
Screwable 600 400 250 90 1.33 43.7 up to 5
Screwable 1200 620 300 80 1.90 58.0 8 to 60
Screwable 1200 650 400 80 1.90 81.0 8 to 60
Screwable 1200 910 600 80 1.90 105.0 8 to 60
CE(on)
C
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
26/34
VMN-SG218 3 -1411
Chopper IGBT Modules
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
Chopper High-Side Switch
(with A/P Diode)
(B)
Device
VS-GB50LA120UX SOT-227
VS-GB50NA120UX SOT-227
VS-GB70LA60UF SOT-227
VS-GB70NA60UF SOT-227
VS-GT100LA120UX SOT-227
VS-GT100NA120UX SOT-227
VS-GB50LP120N
VS-GB100LP120N
VS-GB100LH120N
VS-GB100NH120N
VS-GB150LH120N
VS-GB200LH120N
VS-GB200NH120N
VS-GB300LH120N
VS-GB300NH120N
Chopper Low-Side Switch
(with A/P Diode)
Package Circuit Pin Out
Int-A-Pak
(New)
Int-A-Pak
(New)
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Chopper
Low-Side Switch
Chopper
High-Side Switch
Chopper
Low-Side Switch
Chopper
High-Side Switch
Chopper
Low-Side Switch
Chopper
High-Side Switch
Chopper Low
Side Switch
Chopper Low
Side Switch
Chopper Low
Side Switch
Chopper High
Side Switch
Chopper Low
Side Switch
Chopper Low
Side Switch
Chopper High
Side Switch
Chopper Low
Side Switch
Chopper High
Side Switch
Screwable 1200 84 57 80 3.22 6.3 8 to 60
Screwable 1200 84 57 80 3.22 6.3 8 to 60
Screwable 600 111 76 80 2.23 2.6 up to 150
Screwable 600 111 76 80 2.40 2.6 up to 150
Screwable 1200 134 92 80 2.36 31.2 4 to 30
Screwable 1200 134 92 80 2.36 31.2 4 to 30
Screwable 1200 100 50 80 1.70 8.8 8 to 60
Screwable 1200 200 100 80 1.80 18.5 8 to 60
Screwable 1200 200 100 80 1.77 14.2 8 to 60
Screwable 1200 200 100 80 1.90 18.4 8 to 60
Screwable 1200 300 150 80 1.87 32.0 8 to 60
Screwable 1200 370 200 80 2.07 39.0 8 to 60
Screwable 1200 420 200 80 1.80 39.0 8 to 60
Screwable 1200 500 300 80 2.00 67.4 8 to 60
Screwable 1200 500 300 80 2.00 67.4 8 to 60
Chopper High-Side Switch
(No A/P Diode – SOT-227)
I
at T
C
V
(V)
CES
IC at 25 ºC
(A)
C
(A) (ºC)
Chopper Low-Side Switch
(No A/P Diode – SOT-227)
V
at
CE(on)
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
27/ 34
VMN-SG218 3 -1411
Half-Bridge IGBT Modules
Half-Bridge Half-Bridge with Thermistor
(B)
Device
VS-40MT120UHAPBF MTP Half-Bridge Solderable 1200 80 40 104 3.36 3.2 8 to 60
Package Circuit Pin Out
V
CES
(V)
IC at 25 ºC
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
V
at
C
CE(on)
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
(A)
I
at T
C
(A) (ºC)
VS-40MT120UHTAPBF MTP
VS-50MT060WHTAPBF MTP
VS-70MT060WHTAPBF MTP
Half-Bridge with
Thermistor
Half-Bridge with
Thermistor
Half-Bridge with
Thermistor
Solderable 1200 80 40 104 3.36 3.2 8 to 60
Solderable 600 114 50 109 2.30 2.4 60 to 100
Solderable 600 100 70 78 2.10 2.4 60 to 150
VS-GP100TS60SFPBF Int-A-Pak Half-Bridge Screwable 600 350 240 60 1.37 17.7 DC to 1
VS-GA100TS60SFPBF Int-A-Pak Half-Bridge Screwable 600 220 100 130 1.11 41.0 DC to 1
VS-GB100TS60NPBF Int-A-Pak Half-Bridge Screwable 600 108 74 80 2.60 2.1 8 to 60
VS-GB150TS60NPBF Int-A-Pak
VS-GB200TS60NPBF Int-A-Pak
VS-GT50TP60N
VS-GB50TP120N
VS-GT50TP120N
Int-A-Pak
(New)
Int-A-Pak
(New)
Int-A-Pak
(New)
Half-Bridge with
SMD Gate Resistor
Half-Bridge with
SMD Gate Resistor
Screwable 600 138 93 80 2.64 6.6 8 to 60
Screwable 600 209 142 80 2.60 11.6 8 to 60
Half-Bridge Screwable 600 85 50 80 1.65 1.4 4 to 30
Half Bridge Screwable 1200 100 50 80 1.75 12.5 8 to 60
Half Bridge Screwable 1200 100 50 80 1.90 9.9 4 to 30
VS-GB75TP120N
VS-GB75TP120U
VS-GT100TP60N
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
Int-A-Pak
(New)
Int-A-Pak
(New)
Int-A-Pak
(New)
Half-Bridge Screwable 1200 150 75 80 1.80 16.8 8 to 60
Half Bridge Screwable 1200 105 75 80 3.20 10.0 8 to 60
Half-Bridge Screwable 600 160 100 80 1.65 2.5 4 to 30
28/34
VMN-SG218 3 -1411
Half Bridge IGBT Modules, continued
(B)
Device
VS-GB100TP120N
Package Circuit Pin Out
Int-A-Pak
(New)
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
V
at
C
CE(on)
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
I
at T
V
CES
(V)
IC at 25 ºC
(A)
C
(A) (ºC)
Half Bridge Screwable 1200 200 100 80 1.80 18.4 8 to 60
VS-GB100TP120U
VS-GB100TH120U
VS-GB100TH120N
VS-GB150TH120N
VS-GT150TH120N
VS-GB150TH120U
VS-GA200TH60S
VS-GB200TH120N
VS-GB200TH120U
VS-GB300TH120N
VS-GB300TH120U
Int-A-Pak
(New)
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Half Bridge Screwable 1200 150 100 80 3.45 12.7 8 to 60
Half-Bridge Screwable 1200 200 100 80 3.46 14.0 8 to 60
Half-Bridge Screwable 1200 200 100 80 1.80 14.2 8 to 60
Half-Bridge Screwable 1200 225 150 80 1.70 37.0 8 to 60
Half-Bridge Screwable 1200 300 150 80 1.70 33.0 4 to 30
Half Bridge Screwable 1200 280 150 80 3.1 28.5 8 to 60
Half-Bridge Screwable 600 260 200 80 1.90 16.4 DC to 1
Half-Bridge Screwable 1200 360 200 80 1.90 38.2 8 to 60
Half-Bridge Screwable 1200 330 200 80 3.10 38.2 8 to 60
Half-Bridge Screwable 1200 500 300 80 2.00 67.4 8 to 60
Half-Bridge Screwable 1200 530 300 80 3.10 53.3 8 to 60
VS-GT400TH60N
VS-GT400TH120N
VS-GB400TH120U
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
Dual
Int-A-Pak
Dual
Int-A-Pak
Dual
Int-A-Pak
Half-Bridge Screwable 600 530 400 80 1.60 40.0 4 to 30
Half-Bridge Screwable 1200 600 400 80 1.70 86.0 4 to 30
Half Bridge Screwable 1200 660 400 80 3.1 63.3 8 to 60
29/34
VMN-SG218 3 -1411
Half-Bridge IGBT Modules, continued
(B)
Device
Package Circuit Pin Out
Dual
VS-GA300TD60S
Int-A-Pak
Low-Profile
Dual
VS-GP300TD60S
Int-A-Pak
Low-Profile
Dual
VS-GA400TD60S
Int-A-Pak
Low-Profile
Dual
VS-GP400TD60S
Int-A-Pak
Low-Profile
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
V
at
C
CE(on)
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
I
at T
V
CES
(V)
IC at 25 ºC
(A)
C
(A) (ºC)
Half-Bridge Screwable 600 530 376 80 1.24 156.0 DC to 1
Half-Bridge Screwable 600 610 390 80 1.26 63 DC to 1
Half-Bridge Screwable 600 750 525 80 1.24 184.0 DC to 1
Half-Bridge Screwable 600 835 570 80 1.26 81 DC to 1
Full-Bridge IGBT Modules
Full-Bridge
(B)
Device
VS-20MT120UFAPbF MTP Full-Bridge Solderable 1200 40 20 96 3.29 1.5 8 to 60
VS-20MT120UFP MTP Full-Bridge Solderable 1200 40 20 106 3.29 2.1 8 to 60
VS-25MT060WFAPbF MTP Full-Bridge Solderable 600 69 46 80 2.22 0.9 8 to 60
Package Circuit Pin Out
V
(V)
CES
IC at 25 ºC
(A)
I
at T
C
C
(A) (ºC)
V
CE(on)
T
= 25 ºC
j
typ.
(V)
at
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
30/34
VMN-SG218 3 -1411
4-PAK IGBT Modules
4-Pak (Thermistor Option Available)
(B)
Device
VS-GB50YF120N ECONO2 4-Pak Solderable 1200 66 44 80 3.49 3.5 8 to 60
VS-GB75YF120N ECONO2 4-Pak Solderable 1200 100 67 80 3.40 7.6 8 to 60
Package Circuit Pin Out
V
(V)
CES
IC at 25 ºC
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
V
at
CE(on)
C
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
(A)
I
at T
C
(A) (ºC)
VS-GB75YF120UT ECONO2
6-PAK IGBT Modules
Three-Phase Inverter
(B)
Device
VS-CPV362M4FPbF SIP
VS-CPV362M4UPbF SIP
VS-CPV363M4UPbF SIP
VS-CPV364M4FPbF SIP
4-Pak
with Thermistor
Solderable 1200 100 67 80 3.40 4.8 8 to 60
Package Circuit Pin Out
Three-Phase
Inverter
Three-Phase
Inverter
Three-Phase
Inverter
Three-Phase
Inverter
Solderable 600 8.8 4.8 100 1.41 0.9 1 to 10
Solderable 600 7.2 3.9 100 1.70 0.4 Over 5
Solderable 600 13 6.8 100 1.70 0.5 1 to 10
Solderable 600 27 15 100 1.35 2.5 1 to 10
V
(V)
CES
IC at 25 ºC
(A)
I
at T
C
C
(A) (ºC)
V
CE(on)
T
= 25 ºC
j
typ.
(V)
at
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
VSCPV364M4KPbF SIP
VS-CPV364M4UPbF SIP
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
Three-Phase
Inverter
Three-Phase
Inverter
Solderable 600 24 13 100 1.80 1.3 Over 5
Solderable 600 20 10 100 1.56 0.7 Over 5
31/34
VMN-SG218 3 -1411
3-Levels IGBT Modules
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
Three-Levels Half-Bridge
Inverter Stage
(B)
Device
Package Circuit Pin Out
VS-ENQ030L120S EMIPAK-1B
VS-ETF075Y60U EMIPAK-2B
VS-ETF150Y65U
EMIPAK-2B
VS-EMF050J60U EMIPAK2
VS-GT300FD060N
DIAP
Low-Profile
Double Interleaved Boost
Neutral Point
Clamp Topology
Three Levels
Half-Bridge
Inverter Stage
Three Levels
Half-Bridge
Inverter Stage
Three Levels
Half-Bridge
Inverter Stage
Three Levels
Half-Bridge
Inverter Stage
Neutral Point Clamp Topology
(T-NPC)
V
at
CE(on)
C
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
PressFit
V
CES
(V)
600 to
1200
I
at T
IC at 25 ºC
(A)
C
(A) (ºC)
64 42 80 1.42 0.61 up to 20
PressFit 600 154 113 80 1.45 2.8 up to 20
PressFit 650 180 150 60 2.04 2.10 up to 20
Solderable
600 /
88 / 85 60 / 57 80 1.8 / 2.7 1.1 6 to 150
900
Screwable 600 396 300 80 1.72 27.6 4 to 30
Double Interleaved Boost Converter
(B)
Device
VS-ETL015Y120H EMIPAK-2B
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
Package Circuit Pin Out
Double Interleaved
Boost Converter
PressFit 1200 22 15 80 2.61 1.89 up to 20
32/34
V
(V)
CES
IC at 25 ºC
(A)
I
at T
C
C
(A) (ºC)
V
CE(on)
T
= 25 ºC
j
typ.
(V)
at
E
at
tot
T
= 125 ºC
j
(mJ)
Speed
(kHz)
VMN-SG218 3 -1411
Dual Forward IGBT Modules
Single Phase Bridge Plus PFC
Dual Forward
(B)
Device
VS-100MT060WDF MTP Dual Forward Solderable 600 121 83 80 1.93 2.6 6 to 150
Package Circuit Pin Out
V
CES
(V)
IC at 25 ºC
(A)
VISHAY INTERTECHNOLOGY, INC.
IGBT Modules
V
at
I
at T
C
(A) (ºC)
CE(on)
C
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
VS-150MT060WDF MTP Dual Forward Solderable 600 138 96 80 2.11 3.4
Primary Rectifier and PFC IGBT Modules
Primary Rectifier and PFC
(B)
Device
VS-70MT060WSP MTP
VS-100MT060WSP MTP
Package Circuit Pin Out
Primary Rectifier
and PFC
Primary Rectifier
and PFC
70 kHz to
200 kHz
V
at
V
CES
(V)
IC at 25 ºC
(A)
I
at T
C
(A) (ºC)
CE(on)
C
T
= 25 ºC
j
typ.
(V)
E
tot
T
= 125 ºC
j
(mJ)
at
Speed
(kHz)
Solderable 600 96 66 80 1.93 0.57 up to 150
Solderable 600 107 73 80 2.14 1.95 up to 150
Note: B. Bold indicates new product
1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package
SELECTOR GUIDE
33/34
VMN-SG218 3 -1411
WORLDWIDE SALES CONTACTS
VISHAY INTERTECHNOLOGY, INC.
THE AMERICAS
UNITED STATES
VISHAY AMERICAS ONE GREENWICH PLACE SHELTON, CT 06484 UNITED STATES PH: +1-402-563-6866 FAX: +1-402-563-6296
ASIA
SINGAPORE
VISHAY INTERTECHNOLOGY ASIA PTE LTD. 37A TAMPINES STREET 92 #07-00 SINGAPORE 528886 PH: +65-6788-6668 FAX: +65-6788-0988
P.R. CHINA
VISHAY CHINA CO., LTD. 15D, SUN TONG INFOPORT PLAZA 55 HUAI HAI WEST ROAD SHANGHAI 200030 P.R. CHINA PH: +86-21-22315555 FAX: +86-21-22315551
JAPAN
VISHAY JAPAN CO., LTD. SHIBUYA PRESTIGE BLDG. 4F 3-12-22, SHIBUYA SHIBUYA-KU TOKYO 150-0002 JAPAN PH: +81-3-5466-7150 FAX: +81-3-5466-7160
EUROPE
GERMANY
VISHAY ELECTRONIC GMBH DR.-FELIX-ZANDMAN-PLATZ 1 95100 SELB GERMANY PH: +49-9287-71-0 FAX: +49-9287-70435
FRANCE
VISHAY S.A. 199, BD DE LA MADELEINE 06003 NICE, CEDEX 1 FRANCE PH: +33-4-9337-2727 FAX: +33-4-9337-2726
UNITED KINGDOM
VISHAY LTD. SUITE 7A, TOWER HOUSE ST. CATHERINE’S COURT SUNDERLAND ENTERPRISE PARK SUNDERLAND SR5 3XJ UNITED KINGDOM PH: +44-191-516-8584 FAX: +44-191-549-9556
SELECTOR GUIDE
34/34
VMN-SG218 3 -1411
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use