VISHAY MKT 1813 Technical data
DC Film Capacitor
MKT Axial Type
FEATURES
Ø d
Supplied loose in box, taped on ammopack or reel
RoHS compliant
MKT 1813
Vishay Roederstein
40.0 ± 5.0 40.0 ± 5.0
Dimensions in mm
LEAD DIAMETER
d (mm)
L
Max.
0.6 ≤ 5.0
0.7 > 5.0 ≤ 7.0
0.8 > 7.0 < 16.5
1.0 ≥ 16.5
D (mm)
D
Max.
MAIN APPLICATIONS
Blocking, bypassing, filtering, timing, coupling and
decoupling, interference suppression in low voltage
applications
REFERENCE STANDARDS
IEC 60384-2
MARKING
C-value; tolerance; rated voltage; manufacturer’s type; code
for dielectric material; manufacturer location; manufacturer’s
logo; year and week
ENCAPSULATION
Plastic-wrapped, epoxy resin sealed, flame
retardant
CLIMATIC TESTING CLASS ACC. TO IEC 60068-1
55/100/56
CAPACITANCE RANGE (E12 SERIES)
470 pF to 22 µF
CAPACITANCE TOLERANCE
± 20 %, ± 10 %, ± 5 %
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
100 °C
PULL TEST ON LEADS
Minimum 20 N in direction of leads according to
IEC 60068-2-21
DIELECTRIC
Polyester film
BENT TEST ON LEADS
2 bends trough 90° combined with 10 N tensile strength
ELECTRODES
Metallized
CONSTRUCTION
Mono and internal series construction
RELIABILITY
Operational life > 300 000 h (40 °C/0.5 UR)
Failure rate < 2 FIT (40 °C/0.5 U
)
R
DETAIL SPECIFICATION
RATED (DC) VOLTAGE
63 V, 100 V, 250 V, 400 V, 630 V, 1000 V
For more detailed data and test requirements contact:
dc-film@vishay.com
RATED (AC) VOLTAGE
40 V, 63 V, 160 V, 200 V, 220 V
Document Number: 26013 For technical questions, contact: dc-film@vishay.com
Revision: 08-Dec-08 17
www.vishay.com
MKT 1813
Vishay Roederstein
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
MKT 1813 X XX 25 X X
TYPE
DC Film Capacitor
MKT Axial Type
CAPACITANCE
(numerically)
Example:
468 = 680 nF
Un = 06 = 63 V
Un = 01 = 100 V
Un = 25 = 250 V
Un = 40 = 400 V
Un = 63 = 630 V
Un = 10 = 1000 V
TOLERANCE
4± 5 %
5± 10 %
6± 20 %
SPECIAL LETTER FOR TAPED
Bulk
R Reel
G Ammopack
Note
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139
or end of catalog
SPECIFIC REFERENCE DATA
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C = 0.1 µF
0.1 µF ≤ C = 1.0 µF
C ≥ 1.0 µF
Capacitor length
(mm)
11 12 18 32 56 84 14 11 13 22 37 66 175
19 7 8 13 21 33 65
26.5 4 5 8 13 19 34
31.5 3 4 6 10 15 25
41.5 2 3 5 7 10 17
R between leads, for C ≤ 0.33 µF and U
R between leads, for C ≤ 0.33 µF and U
RC between leads, for C > 0.33 µF and U
RC between leads, for C > 0.33 µF and U
R between leads and case, 100 V; (foil method) > 30 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1.6 x U
Maximum application temperature 100 °C
63 Vdc 100 Vdc 250 Vdc 400 Vdc 630 Vdc 1000 Vdc
If the maximum pulse voltage is less than the rated voltage higher dU/dt values can be permitted.
≤ 100 V > 15 000 MΩ
R
> 100 V > 30 000 MΩ
R
≤ 100 V > 5000 s
R
> 100 V > 10 000 s
R
Maximum pulse rise time (dU/dt)
100 x 10
80 x 10
80 x 10
-4
-4
-4
[V/µs]
R
150 x 10
150 x 10
-4
250 x 10
-4
-
--
, 1 min
Rdc
-4
www.vishay.com For technical questions, contact: dc-film@vishay.com
18 Revision: 08-Dec-08
Document Number: 26013
MKT 1813
DC Film Capacitor
Vishay Roederstein
MKT Axial Type
VOLTAGE
CODE 63
630 Vdc/
220 Vac
(1)
CAPACITANCE
CAPACITANCE
CODE
VOLTAGE
CODE 06
63 Vdc/
40 Vac
VOLTAGE
CODE 01
100 Vdc/
63 Vac
VO LTAGE
CODE 25
250 Vdc/
160 Vac
VOLTAGE
CODE 40
400 Vdc/
200 Vac
DLDLDLDLDLDL
470 pF 147 --------5.011.0--
680 pF 168 --------5.011.0--
1000 pF 210 --------5.011.05.514.0
1500 pF 215 --------5.011.06.014.0
2200 pF 222 --------5.011.06.014.0
3300 pF 233 --------5.011.07.014.0
4700 pF 247 --------5.011.06.019.0
6800 pF 268 ------5.011.06.014.06.019.0
0.01 µF 310 ------5.011.06.014.06.519.0
0.015 µF 315 ----5.011.06.014.06.514.07.519.0
0.022 µF 322 ----5.011.06.014.07.514.09.019.0
0.033 µF 333 ----5.011.06.014.06.519.010.519.0
0.047 µF 347 ----6.014.07.014.07.519.012.019.0
0.068 µF 368 - - 5.0 11.0 6.0 14.0 8.0 14.0 8.5 19.0 11.0 26.5
0.1 µF 410
- - 5.0 11.0 6.0 14.0 7.0 19.0 10.5 19.0 13.0 26.5
--------9.5
19.0
0.15 µF 415 5.0 11.0 5.5 11.0 7.0 14.0 8.5 19.0 10.0 26.5 13.5 31.5
0.22 µF 422
0.33 µF 433
0.47 µF 447
0.68 µF 468
5.0 11.0 6.0 14.0 7.0 19.0 8.0 26.5 11.5 26.5 16.0 31.5
(2)
------8.0
19.0
----
6.0 14.0 6.0 19.0 8.0 19.0 9.5 26.5 13.5 26.5 16.0 41.5
(2)
------9.5
19.0
----
7.0 14.0 6.5 19.0 9.0 19.0 11.0 26.5 14.5 31.5 19.0 41.5
--------14.0
26.5
6.5 19.0 7.0 19.0 8.5 26.5 11.5 31.5 14.5 41.5 - -
(2)
----9.0
19.0
------
1.0 µF 510 7.5 19.0 8.5 19.0 10.0 26.5 13.5 31.5 16.5 41.5 - -
1.5 µF 515
2.2 µF 522
3.3 µF 533
4.7 µF 547
8.5 19.0 8.0 26.5 11.0 31.5 14.0 41.5 - - - -
- - 8.0 19.0
(2)
- - 13.0
31.5
(2)
----
8.5 26.5 9.5 26.5 13.0 31.5 16.5 41.5 - - - -
7.5 19.0
(2)
9.5
19.0
(2)
--------
10.0 26.5 11.5 26.5 15.5 31.5 - - - - - -
8.5 19.0
(2)
- - 14.0
26.5
(2)
------
11.5 26.5 12.0 31.5 15.5 41.5 - - - - - -
(2)
----14.5
31.5
------
6.8 µF 568 12.0 31.5 14.0 31.5 17.5 41.5 - - - - - -
10.0 µF 610
14.5 31.5 16.5 31.5 21.0 41.5 - - - - - -
(2)
- - 13.5
31.5
--------
15.0 µF 615 18.031.520.531.5--------
22.0 µF 622 17.541.5 ----------
Notes
• Pitch = L + 3.5
(1)
Not suitable for mains applications
(2)
For the smaller size please add “-M” at the end of the type designation (e.g. MKT 1813-510/255-M)
VOLTAGE
CODE 10
1000 Vdc/
220 Vac
(2)
--
(2)
--
(1)
Document Number: 26013 For technical questions, contact: dc-film@vishay.com
www.vishay.com
Revision: 08-Dec-08 19
MKT 1813
Vishay Roederstein
DC Film Capacitor
MKT Axial Type
RECOMMENDED PACKAGING
PACKAGING CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLES
G Ammo - MKT 1813-422-014-G x
R Reel 350 MKT 1813-422-014-R x
- Bulk - MKT 1813-422-014 x
Note
• Attention: Capacitors with L > 31.5 mm only as bulk available
EXAMPLE OF ORDERING CODE
TYPE CAPACITANCE CODE VOLTAGE CODE TOLERANCE CODE
MKT 1813 410 06 5 G
Note
(1)
Tolerance Codes: 4 = 5 % (J); 5 = 10 % (K); 6 = 20 % (M)
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to Packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the capacitor body is in good contact with the printed-circuit
board:
• For L ≤ 19 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
• The maximum diameter and length of the capacitors are specified in the dimensions table
• Eccentricity as shown in the drawing below
(1)
or end of catalog.
PACKAGING CODE
Space Requirements On Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
• Product height with seating plane as given by “IEC 60717” as reference: h
1 mm
≤ h + 0.4 mm or h
max.
≤ h' + 0.4 mm
max.
Storage Temperature
• Storage temperature: T
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
stg
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ± 1 °C, an atmospheric pressure of 86 kPa
to 106 kPa and a relative humidity of 50 ± 2 %.
For reference testing, a conditioning period shall be applied over 96 ± 4 h by heating the products in a circulating air oven at the
rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com For technical questions, contact: dc-film@vishay.com
20 Revision: 08-Dec-08
Document Number: 26013
Loading...