VISHAY MKP 1841 Technical data

MKP 1841

Vishay Roederstein

Metallized Polypropylene Film Capacitor

Related Document: IEC 60384-16

MAIN APPLICATIONS:

High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back tuning). Protection circuits in SMPS’s. Snubber and electronic ballast circuits. Input and output filtering in SPS designs, storage, timing and integrating circuits.

MARKING:

Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture

DIELECTRIC:

Polypropylene film

ELECTRODES:

Vacuum deposited aluminum

COATING:

Flame retardant plastic case (UL-class 94 V-0), blue, epoxy resin sealed. Flame class B according to IEC 60065 available on request

CONSTRUCTION:

Extended double-sided metallized polyester film, internal series connection (630 VDC/400 VAC to 2000 VDC), doublesided metallized polyester carrier film (refer to general information)

LEADS:

Tinned wire

IEC TEST CLASSIFICATION:

55/100/56, according to IEC 60068

OPERATING TEMPERATURE RANGE:

- 55°C to + 100°C

CAPACITANCE RANGE:

470pF to 6.8µF

CAPACITANCE TOLERANCES:

± 20% (M), ± 10% (K), ± 5% (J)

RATED VOLTAGES (UR):

160 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC, 1600 VDC, 2000 VDC

PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:

100 VAC, 160 VAC, 220 VAC, 250 VAC, 400 VAC, 600 VAC, 650 VAC, 700 VAC

TEST VOLTAGE (ELECTRODE/ELECTRODE)

1.6 x UR for 2 s

L Max.

0.6

pcm

± 0.4

PCM W Ø d

7.5 0.6 10 - 37.5 < 16.0 0.8 10 - 37.5 ≥ 16.0 1.0

Dimensions in millimeters

ød

± 0.4

Max.

6.0

Marking

-1

INSULATION RESISTANCE:

Measured at 100 VDC after one minute

For C ≤ 0.33µF:

100,000 MΩ minimum value (150,000 MΩ typical value)

TIME CONSTANT:

Measured at 100 VDC after one minute

For C > 0.33µF:

30,000 s minimum value (50,000 s typical value)

TEMPERATURE COEFFICIENT:

- 250 x 10-6/°C (typical value)

CAPACITANCE DRIFT:

Up to + 40°C, ± 0.5% for a period of two years

DERATING FOR DC AND AC.CATEGORY VOLTAGE UC:

At + 85°C: UC = 1.0 U At + 100°C: UC = 0.7 U

SELF INDUCTANCE:

~ 6 nH measured with 2mm long leads

PULL TEST ON LEADS:

≥ 30 N in direction of leads according to IEC 60068-2-21

RELIABILITY:

Operational life > 300,000 h Failure rate < 2 FIT (40°C and 0.5 x U

For further details, please refer to the general information provided in this catalog.

)

MAXIMUM PULSE RISE TIME

PCM (mm) 160 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC

7.5 1800 2200 3600 4500 — — — 10 820 1140 1840 2280 — — — 15 410 560 910 3430 6600 11,100 20,300

22.5 260 320 520 2120 2800 3800 6200

27.5 202 240 400 1524 2000 2680 4200

37.5 140 170 280 980 1280 1690 2600

If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted.

www.vishay.com 74

For technical questions, contact dc-film@vishay.com

Maximum pulse rise time dv/dt [V/µs]

Document Number 26019

Revision 01-Dec-03

MKP 1841

Metallized Polypropylene, Related Document: IEC 60384-16

DISSIPATION FACTOR TAN

δδ

Vishay Roederstein

MEASURED AT C ≤ 0.1µF 0.1µF < C ≤ 1.0µF C > 1.0µF

1kHz 0.3 x 10 10kHz 0.4 x 10 100kHz 1.5 x 10

-3

0.3 x 10

0.5 x 10

-3

0.3 x 10

-3

—

——

Maximum value

CAPACI- CAPACITANCE TANCE

CODE

VOLTAGE VOLTAGE VOLTAGE VOLTAGE

CODE 16 CODE 25 CODE 40 CODE 63 160 VDC/ 250 VDC/ 400 VDC/ 630 VDC/

100 VAC 160 VAC 220 VAC 250 VAC

W H L PCM W H L PCM W H L PCM W H L PCM

470 pF - 147 — — — — — — — — — — — — 4.5 9.5 10.0 7.5

680 pF - 168 — — — — — — — — — — — — 3.0 8.5 10.0 7.5 1000 pF - 210 — — — — — — — — — — — — 3.0 8.5 10.0 7.5 1500 pF - 215 — — — — — — — — — — — — 3.0 8.5 10.0 7.5 2200 pF - 222 — — — — — — — — — — — — 3.0 8.5 10.0 7.5 3300 pF - 233 — — — — — — — — — — — — 4.0 9.0 10.0 7.5 4700 pF - 247 — — — — — — — — 4.5 9.5 10.0 7.5 — — — — 6800 pF - 268 — — — — 4.0 9.0 10.0 7.5 5.0 10.5 10.3 7.5 — — — —

0.01 µF - 310 4.0 9.0 10.0 7.5 4.5 9.5 10.0 7.5 4.5 9.5 13.0 10 — — — —

0.015 µF - 315 5.0 10.5 10.3 7.5 4.5 9.5 10.0 7.5 5.5 10.5 13.0 10 — — — —

0.022 µF - 322 4.0 9.0 13.0 10 4.5 9.5 13.0 10 6.5 11.5 13.0 10 — — — —

0.033 µF - 333 4.5 9.5 13.0 10 5.5 10.5 13.0 10 5.5 10.5 18.0 15 — — — —

0.047 µF - 347 5.5 10.5 13.0 10 6.5 11.5 13.0 10 6.5 12.5 18.0 15 — — — —

0.068 µF - 368 6.5 11.5 13.0 10 5.5 10.5 18.0 15 7.5 13.5 18.0 15 — — — —

0.10 µF - 410 5.5 10.5 18.0 15 6.5 12.5 18.0 15 8.5 14.5 18.0 15 — — — —

0.15 µF - 415 6.5 12.5 18.0 15 7.5 13.5 18.0 15 8.5 16.5 26.5 22.5 — — — —

0.22 µF - 422 7.5 13.5 18.0 15 8.5 17.5 18.0 15 10.5 18.5 26.5 22.5 — — — —

0.33 µF - 433 8.5 17.5 18.0 15 8.5 16.5 26.5 22.5 11.0 21.0 26.5 22.5 — — — —

0.47 µF - 447 8.5 16.5 26.5 22.5 10.5 18.5 26.5 22.5 13.5 23.5 31.5 27.5 — — — —

0.68 µF - 468 9.0 17.0 26.5 22.5 11.0 21.0 26.5 22.5 15.0 24.5 31.5 27.5 — — — —

1.0 µF - 510 11.0 21.0 26.5 22.5 11.5 20.5 31.5 27.5 14.5 24.5 41.5 37.5 — — — —

1.5 µF - 515 13.5 23.5 31.5 27.5 15.0 24.5 31.5 27.5 18.0 32.5 41.5 37.5 — — — —

2.2 µF - 522 15.0 24.5 31.5 27.5 16.5 29.5 31.5 27.5 20.0 40.0 42.5 37.5 — — — —

3.3 µF - 533 18.0 33.0 31.5 27.5 20.0 35.0 31.5 27.5 — — — —————

4.7 µF - 547 18.0 32.5 41.5 37.5 20.0 40.0 42.5 37.5 — — — —————

6.8 µF - 568 20.0 40.0 42.5 37.5 — — — — — — — —————

Further C-values upon request

RECOMMENDED PACKAGING

LETTER TYPE OF HEIGHT REEL ORDERING CODE PCM PCM PCM PCM CODE PACKAGING (H) DIAMETER EXAMPLE 7.5 - 10 15 22.5 - 27.5 37.5

(mm) (mm)

D AMMO 16.5 S* MKP 1841-310-405-D X X — — G AMMO 18.5 S* MKP 1841-310-405-G X X — — F REEL 16.5 350 MKP 1841-310-405-F X X — — W REEL 18.5 350 MKP 1841-310-405-W X X — — V REEL 18.5 500 MKP 1841-522-165-V — X X — G AMMO 18.5 L* MKP 1841-522-165-G — — X — — BULK — — MKP 1841-547-255 XXXX

*S = box size 55 x 210 x 340mm (W x H x L) *L = box size 60 x 510 x 360mm (W x H x L)

Document Number 26019 Revision 01-Dec-03

For technical questions, contact dc-film@vishay.com

www.vishay.com

+ 2 hidden pages