IRFR9110, IRFU9110, SiHFR9110, SiHFU9110
www.vishay.com |
Vishay Siliconix |
|
|
|
Power MOSFET |
PRODUCT SUMMARY
VDS (V) |
|
- 100 |
|
RDS(on) ( ) |
|
VGS = - 10 V |
1.2 |
Qg (Max.) (nC) |
|
8.7 |
|
Qgs (nC) |
|
2.2 |
|
Qgd (nC) |
|
4.1 |
|
Configuration |
|
Single |
|
|
|
|
S |
DPAK |
IPAK |
|
|
(TO-252) |
(TO-251) |
|
|
D |
|
G |
|
D |
|
|
|
S |
|
D S |
|
G |
G |
|
|
|
|
|
|
|
|
|
D |
|
|
P-Channel MOSFET |
FEATURES
• Dynamic dV/dt Rating
• Repetitive Avalanche Rated
• Surface Mount (IRFR9110, SiHFR9110)
• Straight Lead (IRFU9110, SiHFU9110)
• Available in Tape and Reel
•P-Channel
•Fast Switching
•Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
DESCRIPTION
Third generation power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effictiveness.
The DPAK is designed for surface mounting using vapor phase, infrared, or wave soldering techniques. The straight lead version (IRFU, SiHFU Series) is for through-hole mounting applications. Power dissipation levels up to 1.5 W are possible in typical surface mount applications.
ORDERING INFORMATION
Package |
DPAK (TO-252) |
DPAK (TO-252) |
DPAK (TO-252) |
IPAK (TO-251) |
|
Lead (Pb)-free and Halogen-free |
SiHFR9110-GE3 |
SiHFR9110TRL-GE3 |
SiHFR9110TR-GE3 |
SiHFU9110-GE3 |
|
Lead (Pb)-free |
IRFR9110PbF |
IRFR9110TRLPbFa |
IRFR9110TRPbFa |
IRFU9110PbF |
|
SiHFR9110-E3 |
SiHFR9110TL-E3a |
SiHFR9110T-E3a |
SiHFU9110-E3 |
||
|
Note
a. See device orientation.
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER |
|
|
SYMBOL |
LIMIT |
UNIT |
|
|
|
|
|
|
|
|
Drain-Source Voltage |
|
|
VDS |
- 100 |
V |
|
Gate-Source Voltage |
|
|
VGS |
± 20 |
||
|
|
|
||||
Continuous Drain Current |
|
VGS at - 10 V |
TC = 25 °C |
ID |
- 3.1 |
|
|
TC = 100 °C |
- 2.0 |
A |
|||
|
|
|
|
|||
Pulsed Drain Currenta |
|
|
IDM |
- 12 |
|
|
Linear Derating Factor |
|
|
|
0.20 |
W/°C |
|
|
|
|
|
|
|
|
Linear Derating Factor (PCB Mount)e |
|
|
|
0.020 |
||
|
|
|
|
|||
Single Pulse Avalanche Energyb |
|
|
EAS |
140 |
mJ |
|
Repetitive Avalanche Currenta |
|
|
IAR |
- 3.1 |
A |
|
Repetitive Avalanche Energya |
|
|
EAR |
2.5 |
mJ |
|
Maximum Power Dissipation |
|
TC = 25 °C |
PD |
25 |
W |
|
Maximum Power Dissipation (PCB Mount)e |
|
TA = 25 °C |
2.5 |
|||
|
|
|
||||
Peak Diode Recovery dV/dtc |
|
|
dV/dt |
- 5.5 |
V/ns |
|
Operating Junction and Storage Temperature Range |
|
|
TJ, Tstg |
- 55 to + 150 |
°C |
|
Soldering Recommendations (Peak Temperature)d |
|
for 10 s |
|
260 |
||
|
|
|
Notes
a.Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b.VDD = - 25 V, starting TJ = 25 °C, L = 21 mH, Rg = 25 , IAS = - 3.1 A (see fig. 12).
c.ISD - 4.0 A, dI/dt 75 A/μs, VDD VDS, TJ 150 °C.
d.1.6 mm from case.
e.When mounted on 1" square PCB (FR-4 or G-10 material).
S13-0168-Rev. D, 04-Feb-13 |
1 |
Document Number: 91279 |
|
For technical questions, contact: hvm@vishay.com |
|
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFR9110, IRFU9110, SiHFR9110, SiHFU9110
www.vishay.com |
|
|
|
|
Vishay Siliconix |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
THERMAL RESISTANCE RATINGS |
|
|
|
|
|
|
PARAMETER |
SYMBOL |
MIN. |
TYP. |
MAX. |
|
UNIT |
|
|
|
|
|
|
|
Maximum Junction-to-Ambient |
RthJA |
- |
- |
110 |
|
|
Maximum Junction-to-Ambient |
RthJA |
- |
- |
50 |
|
°C/W |
(PCB Mount)a |
|
|||||
Maximum Junction-to-Case (Drain) |
RthJC |
- |
- |
5.0 |
|
|
Note
a. When mounted on 1" square PCB (FR-4 or G-10 material).
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER |
SYMBOL |
TEST CONDITIONS |
MIN. |
TYP. |
MAX. |
UNIT |
|||
Static |
|
|
|
|
|
|
|
|
|
Drain-Source Breakdown Voltage |
VDS |
VGS = 0 V, ID = 250 μA |
- 100 |
- |
- |
V |
|||
VDS Temperature Coefficient |
VDS/TJ |
Reference to 25 °C, ID = 1 mA |
- |
- 0.093 |
- |
V/°C |
|||
Gate-Source Threshold Voltage |
VGS(th) |
VDS = VGS, ID = 250 μA |
- 2.0 |
- |
- 4.0 |
V |
|||
Gate-Source Leakage |
IGSS |
|
VGS = ± 20 V |
|
- |
- |
± 100 |
nA |
|
Zero Gate Voltage Drain Current |
IDSS |
VDS = - 100 V, VGS = 0 V |
- |
- |
- 100 |
μA |
|||
VDS = - 80 V, VGS = 0 V, TJ = 125 °C |
- |
- |
- 500 |
||||||
|
|
|
|||||||
Drain-Source On-State Resistance |
RDS(on) |
VGS = - 10 V |
ID = - 1.9 Ab |
- |
- |
1.2 |
|
||
Forward Transconductance |
gfs |
VDS = - 50 V, ID = - 1.9 A |
0.97 |
- |
- |
S |
|||
Dynamic |
|
|
|
|
|
|
|
|
|
Input Capacitance |
Ciss |
|
VGS = 0 V, |
|
- |
200 |
- |
|
|
Output Capacitance |
Coss |
|
VDS = - 25 V, |
|
- |
94 |
- |
pF |
|
Reverse Transfer Capacitance |
Crss |
f = 1.0 MHz, see fig. 5 |
- |
18 |
- |
|
|||
|
|
|
|
||||||
Total Gate Charge |
Qg |
|
ID = - 4.0 A, VDS = - 80 V, |
- |
- |
8.7 |
|
||
Gate-Source Charge |
Qgs |
VGS = - 10 V |
- |
- |
2.2 |
nC |
|||
see fig. 6 and 13b |
|||||||||
Gate-Drain Charge |
Qgd |
|
|
|
- |
- |
4.1 |
|
|
Turn-On Delay Time |
td(on) |
|
|
|
- |
10 |
- |
|
|
Rise Time |
tr |
VDD = - 50 V, ID = - 4.0 A, |
- |
27 |
- |
ns |
|||
Turn-Off Delay Time |
td(off) |
Rg = 24 , RD = 11 , see fig. 10b |
- |
15 |
- |
||||
|
|||||||||
Fall Time |
tf |
|
|
|
- |
17 |
- |
|
|
Internal Drain Inductance |
LD |
Between lead, |
D |
- |
4.5 |
- |
|
||
6 mm (0.25") from |
|
|
|||||||
|
|
|
|
|
|
nH |
|||
|
|
package and center of |
G |
|
|
|
|||
Internal Source Inductance |
LS |
die contact |
|
|
- |
7.5 |
- |
|
|
|
|
|
|
S |
|
|
|
|
|
Drain-Source Body Diode Characteristics |
|
|
|
|
|
|
|
|
|
Continuous Source-Drain Diode Current |
IS |
MOSFET symbol |
D |
- |
- |
- 3.1 |
|
||
showing the |
|
|
|
||||||
|
|
|
|
|
|
|
A |
||
|
|
integral reverse |
G |
|
|
|
|||
Pulsed Diode Forward Currenta |
ISM |
|
- |
- |
- 12 |
|
|||
p - n junction diode |
S |
|
|||||||
Body Diode Voltage |
VSD |
TJ = 25 °C, IS = - 3.1 A, VGS = 0 Vb |
- |
- |
- 5.5 |
V |
|||
Body Diode Reverse Recovery Time |
trr |
TJ = 25 °C, IF = - 4.0 A, dI/dt = 100 A/μsb |
- |
80 |
160 |
ns |
|||
Body Diode Reverse Recovery Charge |
Qrr |
- |
0.17 |
0.30 |
μC |
||||
|
|
|
|||||||
Forward Turn-On Time |
ton |
Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) |
Notes
a.Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b.Pulse width 300 μs; duty cycle 2 %.
S13-0168-Rev. D, 04-Feb-13 |
2 |
Document Number: 91279 |
|
For technical questions, contact: hvm@vishay.com |
|
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFR9110, IRFU9110, SiHFR9110, SiHFU9110
www.vishay.com |
Vishay Siliconix |
|
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
|
|
|
|
|
Fig. 3 - Typical Transfer Characteristics |
|
|
|
Fig. 1 - Typical Output Characteristics, TC = 25 °C |
|
|
||||||
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 2 - Typical Output Characteristics, TC = 150 °C |
Fig. 4 - Normalized On-Resistance vs. Temperature |
S13-0168-Rev. D, 04-Feb-13 |
3 |
Document Number: 91279 |
|
For technical questions, contact: hvm@vishay.com |
|
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IRFR9110, IRFU9110, SiHFR9110, SiHFU9110
www.vishay.com |
Vishay Siliconix |
|
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage |
Fig. 7 - Typical Source-Drain Diode Forward Voltage |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage |
Fig. 8 - Maximum Safe Operating Area |
S13-0168-Rev. D, 04-Feb-13 |
4 |
Document Number: 91279 |
|
For technical questions, contact: hvm@vishay.com |
|
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000