Vishay 30EPF..PbF Soft Recovery Series, 30CPF..PbF Soft Recovery Series Data Sheet

30EPF..PbF, 30CPF..PbF Soft Recovery Series

Vishay High Power Products

Fast Soft Recovery

Rectifier Diode, 30 A

30EPF..PbF

30CPF..PbF

Base

	Base	common
	common
		cathode
	cathode
		2, 4
	2

FEATURES/DESCRIPTION

The 30EPF..PbF and 30CPF..PbF soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop.

The glass passivation ensures stable reliable

operation in the most severe temperature and power cycling conditions.

1	3	Anode	Anode
Cathode	Anode	1	3
TO-247AC modified		TO-247AC

PRODUCT SUMMARY

VF at 30 A	< 1.41 V
trr	95 ns
VRRM	1000 V to 1200 V

30CPF series is a drop in replacement for 25CPF series (parallel connection only).

This product series has been designed and qualified for industrial level.

Compliant to RoHS directive 2002/95/EC.

APPLICATIONS

•Output rectification and freewheeling in inverters, choppers and converters

•Input rectifications where severe restrictions on conducted EMI should be met

MAJOR RATINGS AND CHARACTERISTICS
SYMBOL	CHARACTERISTICS			VALUES		UNITS
IF(AV)	Sinusoidal waveform			30		A
VRRM				1000 to 1200		V
IFSM				350		A
VF	30 A, TJ = 25 °C			1.41		V
trr	1 A, 100 A/µs			95		ns
TJ				- 40 to 150		°C
VOLTAGE RATINGS
	VRRM, MAXIMUM PEAK			VRSM, MAXIMUM NON-REPETITIVE		IRRM
PART NUMBER	REVERSE VOLTAGE			PEAK REVERSE VOLTAGE		AT 150 °C
			V	V		mA
30EPF10PbF, 30CPF10PbF			1000	1100		6
30EPF12PbF, 30CPF12PbF			1200	1300
ABSOLUTE MAXIMUM RATINGS
PARAMETER	SYMBOL		TEST CONDITIONS		VALUES	UNITS
Maximum average forward current	IF(AV)		TC = 95 °C, 180° conduction half sine wave		30
Maximum peak one cycle	IFSM		10 ms sine pulse, rated VRRM applied		300	A
non-repetitive surge current			10 ms sine pulse, no voltage reapplied		350
Maximum I2t for fusing	I2t		10 ms sine pulse, rated VRRM applied		450	A2s
			10 ms sine pulse, no voltage reapplied		636
Maximum I2√t for fusing	I2√t		t = 0.1 ms to 10 ms, no voltage reapplied		6360	A2√s
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94101	For technical questions, contact: [e-mail]					www.vishay.com
Revision: 09-Dec-09						1

30EPF..PbF, 30CPF..PbF Soft Recovery Series

Vishay High Power Products

Fast Soft Recovery

Rectifier Diode, 30 A

ELECTRICAL SPECIFICATIONS

PARAMETER

SYMBOL

TEST CONDITIONS

VALUES

UNITS

Maximum forward voltage drop

VFM

30 A, TJ = 25 °C

1.41

V

Forward slope resistance

rt

TJ = 150 °C

10.09

mΩ

Threshold voltage

VF(TO)

0.992

V

Maximum reverse leakage current

IRM

TJ = 25 °C

VR = Rated VRRM

0.1

mA

TJ = 150 °C

6

RECOVERY CHARACTERISTICS

PARAMETER

SYMBOL

TEST CONDITIONS

VALUES

UNITS

IFM

Reverse recovery time

trr

IF at 30 Apk

450

ns

trr

Reverse recovery current

Irr

6.1

A

25 A/µs

t

a

t

b

t

Reverse recovery charge

Qrr

25 °C

2.16

µC

dir

dt

Qrr

Snap factor

S

Typical

0.6

IRM(REC)

THERMAL - MECHANICAL SPECIFICATIONS

PARAMETER

SYMBOL

TEST CONDITIONS

VALUES

UNITS

Maximum junction and storage

TJ, TStg

- 40 to 150

°C

temperature range

Maximum thermal resistance,

RthJC

DC operation

0.8

junction to case

Maximum thermal resistance,

RthJA

40

°C/W

junction to ambient

Typical thermal resistance,

RthCS

Mounting surface, smooth and greased

0.2

case to heatsink

Approximate weight

6

g

0.21

oz.

Mounting torque

minimum

6 (5)

kgf · cm

maximum

12 (10)

(lbf · in)

Case style TO-247AC modified (JEDEC)

30EPF10

Marking device

30EPF12

Case style TO-247AC

30CPF10

30CPF12

www.vishay.com	For technical questions, contact: [e-mail]	Document Number: 94101
2		Revision: 09-Dec-09

30EPF..PbF, 30CPF..PbF Soft Recovery Series

Fast Soft Recovery	Vishay High Power Products
Rectifier Diode, 30 A

		150
					30.PF.. Series
<![if ! IE]> <![endif]>Maximum Allowable Case		140			RthJC (DC) = 0.8 K/W
	<![if ! IE]> <![endif]>Temperature (°C)	130
							Ø
		120					Conduction angle
		110
		100
						60°	120°
		90			30°		90°	180°
		80	5	10	15	20	25	30	35
		0

Average Forward Current (A)

Fig. 1 - Current Rating Characteristics

		80
		70	180°
<![if ! IE]> <![endif]>Maximum Average Forward			120°
		60	90°
	<![if ! IE]> <![endif]>Power Loss (W)		60°
		50	30°			DC
		40	RMS limit
		30
						Ø
		20			Conduction period
		10			30.PF.. Series
					TJ = 150 °C
		0
		0	10	20	30	40	50

Average Forward Current (A)

Fig. 4 - Forward Power Loss Characteristics

		150
					30.PF.. Series
<![if ! IE]> <![endif]>AllowableMaximumCase	<![if ! IE]> <![endif]>(°C)Temperature	140			RthJC (DC) = 0.8 K/W		<![if ! IE]> <![endif]>WaveSineHalfPeak	<![if ! IE]> <![endif]>CurrentForward(A)
		130
						Ø
		120			Conduction period
		110
			30°
		100		60°
		90			90°
					120°
						DC
					180°
		80	10	20		40	50
		0			30

350

300

250

200

150

100

50

At any rated load condition and with rated VRRM applied following surge.

Initial TJ = 150 °C

at 60 Hz 0.0083 s

at 50 Hz 0.0100 s

30.PF.. Series

1

10

100

Average Forward Current (A)

Fig. 2 - Current Rating Characteristics

		60
				180°
<![if ! IE]> <![endif]>Maximum Average Forward		50		120°
				90°
	<![if ! IE]> <![endif]>Power Loss (W)			60°
		40		30°				RMS limit
		30
		20					Ø
						Conduction angle
		10				30.PF.. Series
		0				TJ = 150 °C
		0	5	10	15	20	25	30	35

Average Forward Current (A)

Fig. 3 - Forward Power Loss Characteristics

Number of Equal Amplitude Half Cycle

Current Pulses (N)

Fig. 5 - Maximum Non-Repetitive Surge Current

		400
			Maximum non-repetitive surge current
		350	versus pulse train duration.
<![if ! IE]> <![endif]>Peak Half Sine Wave	<![if ! IE]> <![endif]>Forward Current (A)		Initial TJ = 150 °C
		300	No voltage reapplied
			Rated VRRM reapplied
		250
		200
		150
		100
			30.PF.. Series
		50
		0.01	0.1	1

Pulse Train Duration (s)

Fig. 6 - Maximum Non-Repetitive Surge Current

Document Number: 94101	For technical questions, contact: [e-mail]	www.vishay.com
Revision: 09-Dec-09		3

30EPF..PbF, 30CPF..PbF Soft Recovery Series

Vishay High Power Products	Fast Soft Recovery
	Rectifier Diode, 30 A

<![if ! IE]> <![endif]>Current (A)	1000
	100
<![if ! IE]> <![endif]>Forward
				TJ = 25 °C
<![if ! IE]> <![endif]>Instantaneous	10			TJ = 150 °C
					30.PF.. Series
	1
	0	1	2	3	4	5	6

Instantaneous Forward Voltage (V)

Fig. 7 - Forward Voltage Drop Characteristics

		0.7			IFM = 30 A
			30.PF.. Series
		0.6	TJ = 25 °C		IFM = 20 A
<![if ! IE]> <![endif]>Maximum Reverse	<![if ! IE]> <![endif]>Time (µs)				IFM = 10 A
		0.5			IFM = 5 A
					IFM = 1 A
		0.4
		0.3
		0.2
<![if ! IE]> <![endif]>-	<![if ! IE]> <![endif]>Recovery
<![if ! IE]> <![endif]>rr
<![if ! IE]> <![endif]>t		0.1
		0			150
		0	50	100		200

dI/dt - Rate of Fall of Forward Current (A/µs)

		Fig. 8 - Recovery Time Characteristics, TJ = 25 °C
		1.2
					30.PF.. Series
<![if ! IE]> <![endif]>Maximum Reverse		1.0			TJ = 150 °C
	<![if ! IE]> <![endif]>Time (µs)	0.8			IFM = 30 A
					IFM = 20 A
		0.6			IFM = 10 A
					IFM = 5 A
		0.4			IFM = 1 A
<![if ! IE]> <![endif]>-	<![if ! IE]> <![endif]>Recovery
<![if ! IE]> <![endif]>rr
<![if ! IE]> <![endif]>t		0.2
		0
		0	50	100	150	200

dI/dt - Rate of Fall of Forward Current (A/µs)

Fig. 9 - Recovery Time Characteristics, TJ = 150 °C

		6
			30.PF.. Series		IFM = 30 A
		5
<![if ! IE]> <![endif]>Maximum Reverse	<![if ! IE]> <![endif]>Charge (µC)		TJ = 25 °C
					IFM = 20 A
		4
		3
					IFM = 10 A
		2			IFM = 5 A
<![if ! IE]> <![endif]>-	<![if ! IE]> <![endif]>Recovery
<![if ! IE]> <![endif]>rr
<![if ! IE]> <![endif]>Q		1			IFM = 1 A
		0			150
		0	50	100		200

dI/dt - Rate of Fall of Forward Current (A/µs)

		Fig. 10 - Recovery Charge Characteristics, TJ = 25 °C
		10
			30.PF.. Series
<![if ! IE]> <![endif]>Maximum Reverse	<![if ! IE]> <![endif]>Charge (µC)	8	TJ = 150 °C		IFM = 30 A
		6			IFM = 20 A
		4			IFM = 10 A
<![if ! IE]> <![endif]>-	<![if ! IE]> <![endif]>Recovery				IFM = 5 A
<![if ! IE]> <![endif]>rr		2
<![if ! IE]> <![endif]>Q
					IFM = 1 A
		0
		0	50	100	150	200

dI/dt - Rate of Fall of Forward Current (A/µs)

Fig. 11 - Recovery Charge Characteristics, TJ = 150 °C

www.vishay.com	For technical questions, contact: [e-mail]	Document Number: 94101
4		Revision: 09-Dec-09