Schottky Generation 5.0, 2 x 15 A
Anode
TO-2 47 AC
PRODUCT SUMMARY
I
F(AV)
V
R
V
at 15 A at 125 °C 0.67 V
F
High Performance
Base
common
2
cathode
Anode
2
Common
13
cathode
2 x 15 A
100 V
30CPT100
Vishay High Power Products
FEATURES
• 175 °C high performance Schottky diode
• Very low forward voltage drop
• Extremely low reverse leakage
• Optimized V
• Increased ruggedness for reverse avalanche capability
• RBSOA available
• Negligible switching losses
• Submicron trench technology
• Full lead (Pb)-free and RoHS compliant devices
• Designed and qualified for industrial level
APPLICATIONS
• High efficiency SMPS
• Automotive
• High frequency switching
• Output rectification
• Reverse battery protection
• Freewheeling
• Dc-to-dc systems
• Increased power density systems
vs. IR trade off for high efficiency
F
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
V
V
T
RRM
F
J
15 Apk, TJ = 125 °C (typical, per leg) 0.63
Range - 55 to 175 °C
100
V
VOLTAGE RATINGS
PARAMETER SYMBOL TEST CONDITIONS 30CPT100 UNITS
Maximum DC reverse voltage V
TJ = 25 °C 100 V
R
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average
forward current
Maximum peak one cycle
non-repetitive surge current
Non-repetitive avalanche energy E
Repetitive avalanche current I
per leg
per device 30
I
F(AV)
I
FSM
AR
50 % duty cycle at TC = 158 °C, rectangular waveform
5 µs sine or 3 µs rect. pulse
10 ms sine or 6 ms rect. pulse 240
TJ = 25 °C, IAS = 1.1 A, L = 60 mH 36 mJ
AS
Limited by frequency of operation and time pulse duration so
< TJ max. IAS at TJ max. as a function of time pulse
that T
J
See fig. 8
Following any rated load
condition and with rated
V
applied
RRM
I
T
15
920
AS
max.
J
at
A
A
Document Number: 94559 For technical questions, contact: diodes-tech@vishay.com
Revision: 07-Oct-08 1
www.vishay.com
30CPT100
Vishay High Power Products
High Performance
Schottky Generation 5.0,
2 x 15 A
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS TYP. MAX. UNITS
15 A
30 A - 0.92
RM
FM
(1)
15 A
30 A - 0.79
TJ = 25 °C
(1)
T
J
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 550 - pF
T
Measured lead to lead 5 mm from package body 7.5 - nH
S
Forward voltage drop per leg V
Reverse leakage current per leg I
Junction capacitance per leg C
Series inductance per leg L
Maximum voltage rate of change dV/dt Rated V
Note
(1)
Pulse width < 300 µs, duty cycle < 2 %
= 125 °C - 5 mA
R
T
= 25 °C
J
= 125 °C
T
J
V
= Rated VR
R
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and
storage temperature range
Maximum thermal resistance,
junction to case per leg
Maximum thermal resistance,
junction to case per device
Typical thermal resistance,
case to heatsink
Approximate weight
Mounting torque
Marking device Case style TO-247AC 30CPT100
minimum 6 (5)
maximum 12 (10)
T
, T
J
Stg
R
DC operation
thJC
R
thCS
Mounting surface, smooth and greased 0.25
-0.81
-0.67
- 120 µA
- 10 000 V/µs
- 55 to 175 °C
1.4
0.8
6g
0.21 oz.
°C/W
kgf · cm
(lbf · in)
V
www.vishay.com For technical questions, contact: diodes-tech@vishay.com
2 Revision: 07-Oct-08
Document Number: 94559
30CPT100
100
Tj = 175°C
(A)
F
10
Instantaneous Forward Current - I
Tj = 125°C
High Performance
Schottky Generation 5.0,
2 x 15 A
(mA)
R
Reverse Current - I
0.001
0.0001
1000
(pF)
T
Vishay High Power Products
100
10
0.1
0.01
175°C
150°C
1
020406080100120
125°C
100°C
75°C
50°C
25°C
Reverse Voltage - VR (V)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
Tj = 25°C
1
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Forward Voltage Drop - VFM (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
10
D = 0.5
1
0.1
0.01
D = 0.33
D = 0.25
D = 0.2
thJC (°C/W)
Thermal Impedance Z
0.001
1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01
D = 0.75
Single Pulse
(Thermal Resistance)
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Maximum Thermal Impedance Z
Junction Capacitance - C
100
0 20 40 60 80 100 120
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Characteristics
thJC
Document Number: 94559 For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
Revision: 07-Oct-08 3
30CPT100
Vishay High Power Products
180
170
DC
160
Square wave (D=0.50)
150
80% rated Vr applied
Allowable Case Temperature (°C)
see note (1)
140
0 5 10 15 20 25
Average Forward Current - IF
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
FSM(A)
High Performance
Schottky Generation 5.0,
2 x 15 A
(A)
(AV)
1000
15
12
9
6
3
Average Power Loss - (Watts)
0
180°
120°
90°
60°
30°
RMS Limit
0 5 10 15 20 25
Average Forward Current - I
Fig. 6 - Forward Power Loss Characteristics
DC
F
(A)
(AV)
Non-Repetitive Surge Current - I
100
10 100 1000 10000
Square Wave Pulse Duration - tp(microsec)
Fig. 7 - Maximum Non-Repetitive Surge Current
Note
(1)
Formula used: TC = TJ - (Pd + Pd
Pd = Forward power loss = I
Pd
= Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated V
REV
F(AV)
) x R
REV
x VFM at (I
thJC
;
F(AV)
/D) (see fig. 6);
R
www.vishay.com For technical questions, contact: diodes-tech@vishay.com
Document Number: 94559
4 Revision: 07-Oct-08
30CPT100
High Performance
Vishay High Power Products
Schottky Generation 5.0,
2 x 15 A
100
10
Tj = 125°C
1
Avalanche Current (A)
0.1
Fig. 8 - Reverse Bias Safe Operating Area (Avalanche Current vs. Rectangular Pulse Duration)
100
Tj = 175°C
Rectangular Pulse Duration ( μsec)
Tj = 25°C
001011
10
Avalanche Energy (mJ)
1
Fig. 9 - Reverse Bias Safe Operating Area (Avalanche Energy vs. Rectangular Pulse Duration)
Tj = 25°C
Tj = 125°C
Tj = 175°C
001011
Rectangular Pulse Duration ( μsec)
Document Number: 94559 For technical questions, contact: diodes-tech@vishay.com
Revision: 07-Oct-08 5
www.vishay.com
30CPT100
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
Tube standard pack quantity: 25 pieces
High Performance
Schottky Generation 5.0,
2 x 15 A
30 C P T 100
1 - Current rating (30 A)
- Circuit configuration:
2
C = Common cathode
- Package:
3
P = TO-247
4 - T = Trench
5 - Voltage code (100 V)
51324
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95223
Part marking information http://www.vishay.com/doc?95226
www.vishay.com For technical questions, contact: diodes-tech@vishay.com
6 Revision: 07-Oct-08
Document Number: 94559
Assembly
lot code
xxxxxxx
V P119X
A
Part Marking Information
Vishay High Power Products
TO-247
Example: This is a xxxxxxx with
Part number
C
Product version (optional):
P = Lead (Pb)-free
None = Standard
Date code:
Year 1 = 2001
Week 19
Line X
assembly lot code AC,
assembled on WW 19, 2001
in the assembly line ”X”
Document Number: 95226 For technical questions concerning discrete products, contact: diodes-tech@vishay.com
Revision: 28-Nov-08 For technical questions concerning module products, contact: ind-modules@vishay.com
www.vishay.com
1
DIMENSIONS in millimeters and inches
Outline Dimensions
Vishay High Power Products
TO-247
(2) R/2
2 x R
(5) L1
0.10 AC
Planting
B
D
(2)
C
2 x b2
3 x b
MM
(c)
Section C - C, D - D, E - E
E
1
2
b4
(b1, b3, b5)
(b, b2, b4)
(3)
E/2
3
(4)
2 x e
S
D
L
Base metal
c1
See view B
A
A2
A
D
A
C
A1
DDE E
View B
A
(6)
Ø P
MM
Ø K BD
D2
Thermal pad
Lead assignments
HEXFET
1. - Gate
2. - Drain
3. - Source
4. - Drain
C
C
IGBTs, CoPAK
1. - Gate
2. - Collector
3. - Emitter
4. - Collector
4
(4)
E1
MM
0.01 BD
View A - A
(Datum B)
FP1
D1 (4)
Diodes
1. - Anode/open
2. - Cathode
3. - Anode
SYMBOL
MILLIMETERS INCHES
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
NOTES SYMBOL
MILLIMETERS INCHES
NOTES
A 4.65 5.31 0.183 0.209 D2 0.51 1.30 0.020 0.051
A1 2.21 2.59 0.087 0.102 E 15.29 15.87 0.602 0.625 3
A2 1.50 2.49 0.059 0.098 E1 13.72 - 0.540 -
b 0.99 1.40 0.039 0.055 e 5.46 BSC 0.215 BSC
b1 0.99 1.35 0.039 0.053 FK 2.54 0.010
b2 1.65 2.39 0.065 0.094 L 14.20 16.10 0.559 0.634
b3 1.65 2.37 0.065 0.094 L1 3.71 4.29 0.146 0.169
b4 2.59 3.43 0.102 0.135 N 7.62 BSC 3
b5 2.59 3.38 0.102 0.133 FP 3.56 3.66 0.14 0.144
c 0.38 0.86 0.015 0.034 FP1 - 6.98 - 0.275
c1 0.38 0.76 0.015 0.030 Q 5.31 5.69 0.209 0.224
D 19.71 20.70 0.776 0.815 3 R 0.452 5.49 0.178 0.216
D1 13.08 - 0.515 - 4 S 5.51 BSC 0.217 BSC
Notes
(1)
Dimensioning and tolerancing per ASME Y14.5M-1994
(2)
Contour of slot optional
(3)
Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outermost extremes of the plastic body
(4)
Thermal pad contour optional with dimensions D1 and E1
(5)
Lead finish uncontrolled in L1
(6)
Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154")
(7)
Outline conforms to JEDEC outline TO-247 with exception of dimension c
Document Number: 95223 For technical questions concerning discrete products, contact: diodes-tech@vishay.com
www.vishay.com
Revision: 11-Mar-08 For technical questions concerning module products, contact: ind-modules@vishay.com
1
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Loading...