Vishay 30BQ040 Data Sheet

Bulletin PD-2.439 rev. C 05/01
30BQ040
SCHOTTKY RECTIFIER
Major Ratings and Characteristics
Characteristics 30BQ040 Units
I
Rectangular 3.0 A
waveform
V
RRM
I
@ t p= 5 µs sine 2000 A
FSM
VF@ 3.0 Apk, TJ = 125°C 0.43 V
TJrange - 55 to 1 50 °C
Device Marking: IR3F
2.75 (.108)
3.15 (.124)
40 V
3 Amp
SMC
Description/Features
The 30BQ040 surface-mount Schottky rectifier has been de­signed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection.
Small foot print, surface mountable
Very low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability
5.59 (.220)
6.22 (.245)
www.irf.com
6.60 (.260)
7.11 (.280)
2.00 (.079)
2.62 (.103)
0.76 (.030)
1.52 (.060)
Dimensions in millimeters and (inches)
For recommended footprint and soldering techniques refer to Application Note # AN-994
7.75 (.305)
8.13 (.320)
Outline SMC
.152 (.006) .305 (.012)
.102 (.004)
.203 (.008)
1
30BQ040
Bulletin PD-2.439 rev. C 05/01
Voltage Ratings
Part number 30BQ040
VRMax. DC Reverse Voltage (V) 40
V
Max. Working Peak Reverse Voltage (V)
RWM
Absolute Maximum Ratings
Parameters 30BQ Units Conditions
I
Max. Average Forward Current 3.0 A 50% duty cycle @ TL = 118 °C, rectangular wave form
F(AV)
4.0 50% duty cycle @ TL= 110 °C, rectangular wave form
I
Max. Peak One Cycle Non-Repetitive 2000 A 5µs Sine or 3µs Rect. pulse
FSM
Surge Current 110 10ms Sine or 6ms Rect. pulse
EASNon Repetitive Avalanche Energy 35 mJ TJ = 25 °C, IAS = 0.6A, L = 6.6mH
IARRepetitive Avalanche Current 0.6 A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. Va = 1.5 x Vr typical
Following any rated load condition and with rated V
RRM
Electrical Specifications
Parameters 30BQ Units Conditions
VFMMax. Forward Voltage Drop (1) 0.53 V @ 3A
0.68 V @ 6A
0.43 V @ 3A
0.57 V @ 6A
IRMMax. Reverse Leakage Current (1) 0.5 mA TJ = 25 °C
30 mA TJ = 125 °C
CTMax. Junction Capacitance 230 pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25°C
LSTypical Series Inductance 3.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/µs
(Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated V
R
applied
Thermal-Mechanical Specifications
Parameters 30BQ Units Conditions
TJMax. Junction Temperature Range - 55 to 150 °C
T
Max. Storage Temperature Range - 55 to 150 °C
stg
R
Max. Thermal Resistance, Junction 12 °C/W DC Operation (* See Fig. 4)
thJL
to Lead (2)
R
Max. Thermal Resistance, Junction 46 °C/W DC Operation
thJA
to Ambient
wt Approximate Weight 0.24 g
Case Style SMC Similar DO-214AB
(1) Pulse Width < 300µs, Duty Cycle < 2% (2) Mounted 1 inch square PCB, Thermal Probe connected to lead 2mm from Package
2
www.irf.com
30BQ040
Bulletin PD-2.439 rev. C 05/01
10
(A)
F
1
Instantaneous Forward Current - I
T = 150˚C
J
T = 125˚C
J
T = 25˚C
J
100000
(µA)
R
Reverse Current - I
T = 150˚C
J
10000
1000
100
10
1
125˚C 100˚C
75˚C
50˚C
25˚C
0 10203040
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
1000
T = 25˚C
J
(p F)
T
100
0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Fig. 1 - Max. Forward Voltage Drop Characteristics
www.irf.com
Junction Capacitance - C
10
Forward Voltage Drop - VFM (V)
0 5 10 15 20 25 30 35 40 45
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
(Per Leg)
Vs. Reverse Voltage (Per Leg)
100
(°C/W)
Thermal Impedance Z
D = 0.75
10
D = 0.50
thJC
D = 0.33 D = 0.25 D = 0.20
1
Single Pulse
(Thermal Resistance)
0.1
0.00001 0.0001 0.001 0.01 0.1 1 10 100
Notes:
1. Duty factor D = t1/ t 2
2. Peak Tj = Pdm x ZthJC+Tc
P
DM
t
1
t
2
t1 , Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance Z
Characteristics (Per Leg)
thJC
3
30BQ040
Bulletin PD-2.439 rev. C 05/01
160 150
DC
140 130 120 110 100
Square wave (D = 0.50)
90
80% Rated Vr applied
80
Allowable Lead Temperature (°C)
see note (2)
70
012345
Average Forward Current - I
Fig. 4 - Maximum Average Forward Current
Vs. Allowable Lead Temperature
10000
(A)
FSM
1000
F(AV)
D=0.20 D=0.25 D=0.33 D=0.50 D=0.75
(A)
2
D = 0.20 D = 0.25 D = 0.33 D = 0.50
1.5
D = 0.75
DC
RMS Limit
1
0.5
Average Power Loss (Watts)
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
Average Forward Current - I
Fig. 5 - Maximum Average Forward Dissipation
Vs. Average Forward Current
F(AV)
(A)
Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration
(2) Formula used: TC = TJ - (Pd + Pd
Pd = Forward Power Loss = I
Pd
= Inverse Power Loss = VR1 x IR (1 - D); IR @ V
REV
F(AV)
4
100
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge
Non-Repetitive Surge Current - I
10
10 100 1000 10000
Square Wave Pulse Duration - T
) x R
REV
x VFM @ (I
;
thJC
/ D) (see Fig. 6);
F(AV)
= 80% rated V
R1
R
(Microsec)
p
www.irf.com
Tape & Reel Information
30BQ040
Bulletin PD-2.439 rev. C 05/01
330 (13)
16 (0.63)
Dimensions in millimeters and (inches)
Marking & Identification
Each device has 8 characters, configurated 4 digits on two rows, for identification. The first row designates the device as manufactured by International Rectifier as indicated by the letters "IR", and the Part Number ( indicates the current rating and voltage/process). The second row indicates the year and the week of manufacturing.
I R 3 F
Voltage/ Process
Current Rating (3A)
IR logo
C = 15 V E = 30 V F = 40 V H = 60 V J = 100 V
16 (0.63)
8 (0.32)
FEED DIRECTION
Ordering Information
30BQ SERIES - TAPE AND REEL
WHEN ORDERING, INDICATE THE PART NUMBER
AND THE QUANTITY ( IN MULTIPLES OF 3000
PIECES).
EXAMPLE: 30BQ040TR - 6000 PIECES
30BQ SERIES - BULK QUANTITIES
WHEN ORDERING, INDICATE THE PART NUMBER
AND THE QUANTITY ( IN MULTIPLES OF 1000
PIECES).
EXAMPLE: 30B Q040 - 2000 P IECES
YY WW (Date Code)
www.irf.com
Year
Week
5
30BQ040
Bulletin PD-2.439 rev. C 05/01
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/01
6
www.irf.com
Loading...