Datasheet 2322 640 5. Datasheet (VISHAY)

查询23226405供应商
Vishay BCcomponents
NTC Thermistors, Accuracy Line
FEATURES
• Accurate over a wide temperature range (tolerance on
B-value between 2.5% and 0.5%)
• Good stability over a long life
• Excellent price/performance ratio
• Flexible leads
• Low heat conductivity through 0.4 mm diameter Ni-leads
APPLICATIONS
QUICK REFERENCE DATA
PARAMETER VALUE
Resistance value at 25 Tolerance on R Tolerance on B Maximum dissipation 100 mW Dissipation factor Response time; note 1 Thermal time constant Operating temperature range at: zero dissipation (continuously) zero dissipation (for short maximum dissipation (100 mW) 0 to +55 Climatic category 40/125/56 Mass
Notes
1. Response time in silicone oil MS200/50. This is the time needed for the sensor to reach 63.2% of the total temperature difference when subjected to a temperature change from 25 85 ° C in oil.
2. Valid for all types with the exception of 2322 640 5.474.
° C 2 to 470 k
-value
25
-value
25/85
δ
τ
± 5%; ± 3%; ± 2%; ± 1%
± 2.5 to 0.5%
2.2 mW/K
≈ 1.7 s
13 s
− 40 to +125 ° C
≤ 150 ° C
° C
≈ 0.11 g
° C in air to
• Temperature sensing and control.
These thermistors have a negative temperature coefficient. The device consists of a chip with two tinned nickel leads and is colour coded.
PACKAGING
The thermistors are packed in cardboard boxes; the smallest packing quantity is 500 units.
MARKING
The thermistors are marked with coloured bands; see Dimentions and “Electrical data and ordering information”
MOUNTING
By soldering in any position.
ELECTRICAL DATA AND ORDERING INFORMATION
R
25
(k Ω )
2 3528 K
2.7 3977 K
4.7 3977 K
5 3977 K 10 3977 K 12 3740 K 22 3740 K 47 4090 K 68 4190 K
100 4190 K 470 4570 K
Notes
1. Extended range available on request.
2. Thermistors have a 12-digit catalog number starting with 2322 640 5; the next digit indicates the tolerance and the last 3 digits indicate the resistance value.
www.vishay.com For technical questions contact: nlr.europe@vishay.com 64 Revision: 15-Jun-04
B
-VALUE
25/85
± 0.5% 3202 6202 4202 5202 orange orange ± 0.75% 3272 6272 4272 5272 red red ± 0.75% 3472 6472 4472 5472 green green ± 0.75% 3502 6502 4502 5502 black white ± 0.75% 3103 6103 4103 5103 blue blue
± 2% 3123 6123 4123
± 2% 3223 6223 4223 ± 1.5% 3473 6473 4473 ± 1.5% 3683 6683 4683 ± 1.5% 3104 6104 4104 5104 brown brown ± 1.5% 3474 6474 4474
R
25
CATALOG NUMBER 2322 640 5.... CODING (see dimensions)
± 5% R
± 3% R
25
± 2% R
25
± 1% I II
25
yellow yellow
white white black black
grey grey
violet violet
Document Number: 29048
NTC Thermistors, Accuracy Line
DIMENSIONS in millimeters
3.4 max.
6.0 max
2 ± 1.0
2.54
40
±1.5
I
II
LONG TERM STABILITY OF R25 AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 °C).
0.4
R
25
R
25
(%)
0.2
3
max.
I
II
± 0.04
Curves valid for 2.2 to 10 k.
Curve 1: maximum deviation.
1
Curve 2: average deviation.
Curve 3: minimum deviation.
2
Vishay BCcomponents
DERATING AND LONG TERM STABILITY
P
(%)
100
0
LONG TERM STABILITY OF T AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 °C).
0.05
T
(K)
0
05540 85 125
o
T ( C)
amb
Power derating curve.
Curves valid for 2.2 to 10 k.
Curve 1: minimum deviation.
Curve 2: average deviation.
1
Curve 3: maximum deviation.
2
0.05
0.1
3
2
10
3
10
test duration (h)
AT 2 K
25
R
25
4
10
2322 640 .....; see note 1
5.202
0.2
0
2
10
3
10
test duration (h)
3
4
10
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R
T
(
oper
° C)
/R
R
T
25
− 40 23.3402 1.65
− 35 17.3347 1.49
− 30 13.0166 1.34
− 25 9.8764 1.19
− 20 7.5682 1.05
− 15 5.8541 0.92
− 10 4.5688 0.79
− 5 3.5961 0.66
0 2.8533 0.54
5 2.2815 0.43 10 1.8376 0.31 15 1.4904 0.21 20 1.2169 0.10 25 1.0000 0.00 30 0.8266 0.10 35 0.6873 0.19 40 0.5746 0.28 45 0.4827 0.37
∆ R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
− 6.06 46684
− 5.84 34672
− 5.62 26035
− 5.42 19754
− 5.23 15138
− 5.05 11709
− 4.87 9138
− 4.71 7193
− 4.55 5707
− 4.40 4563
− 4.26 3675
− 4.12 2981
− 3.99 2434
− 3.87 2000
− 3.75 1653
− 3.63 1375
− 3.53 1149
− 3.42 965.0
Document Number: 29048 For technical questions contact: nlr.europe@vishay.com
www.vishay.com
Revision: 15-Jun-04 65
Vishay BCcomponents
T
oper
(°C)
50 0.4073 0.46 55 0.3452 0.54 60 0.2937 0.62 65 0.2508 0.70 70 0.2149 0.78 75 0.1847 0.85 80 0.1593 0.92 85 0.1377 0.99 90 0.1194 1.06
95 0.1038 1.13 100 0.09045 1.19 105 0.07900 1.25 110 0.06915 1.31 115 0.06066 1.37 120 0.05332 1.43 2.29 106.6 125 0.04696 1.49 2.23 93.9 130 0.04143 1.54 2.18 82.9 135 0.03662 1.60 2.13 73.3 140 0.03243 1.65 2.08 64.9 145 0.02877 1.70 2.03 57.5 150 0.02556 1.75 2.33 51.1
RT/R
25
R DUE TO
B-TOLERANCE
NTC Thermistors, Accuracy Line
TC
(%)
(%/K)
− 3.32 814.7
− 3.23 690.5
− 3.14 587.5
− 3.05 501.7
− 2.97 429.8
− 2.89 369.5
− 2.81 318.6
− 2.73 275.5
− 2.66 238.9
− 2.59 207.6
− 2.53 180.9
− 2.46 158.0
− 2.40 138.3
2.34 121.3
R
2322 640 .....; see note 1
25
5.202
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 2.7 KΩ , 4.7 K Ω, 5 KΩ & 10 K
R
T
oper
(°C)
40 33.21 2.66 6.57 89.67 156.1 166.1 332.1
35 23.99 2.41 6.36 64.77 112.8 120.0 240.0
30 17.52 2.17 6.15 47.31 82.35 87.60 175.2
25 12.93 1.94 5.95 34.91 60.77 64.65 129.3
20 9.636 1.71 5.76 26.02 45.30 48.18 96.36
15 7.250 1.50 5.58 19.58 34.08 36.25 72.50
10 5.505 1.29 5.40 14.86 25.87 27.52 55.05
5 4.216 1.08 5.24 11.38 19.81 21.08 42.16
0 3.255 0.89 5.08 8.790 15.30 16.28 32.56
5 2.534 0.70 4.92 6.842 11.91 12.67 25.34 10 1.987 0.52 4.78 5.366 9.340 9.936 19.87 15 1.570 0.34 4.64 4.239 7.378 7.849 15.70 20 1.249 0.17 4.50 3.372 5.869 6.244 12.49 25 1.000 0.00 4.37 2.700 4.700 5.000 10.00 30 0.8059 0.16 4.25 2.176 3.788 4.030 8.059 35 0.6535 0.32 4.13 1.764 3.072 3.267 6.535 40 0.5330 0.47 4.02 1.439 2.505 2.665 5.330 45 0.4372 0.62 3.91 1.180 2.055 2.186 4.372 50 0.3605 0.77 3.80 0.973 1.694 1.803 3.606 55 0.2989 0.91 3.70 0.807 1.405 1.494 2.989 60 0.2490 1.05 3.60 0.672 1.170 1.245 2.490 65 0.2084 1.18 3.51 0.562 0.9797 1.042 2.084 70 0.1753 1.31 3.42 0.473 0.8239 0.8765 1.753 75 0.1481 1.44 3.33 0.399 0.6960 0.7405 1.481 80 0.1256 1.57 3.25 0.339 0.5905 0.6282 1.256 85 0.1070 1.69 3.16 0.289 0.5031 0.5352 1.070 90 0.09154 1.81 3.09 0.247 0.4303 0.4577 0.9154 95 0.07860 1.93 3.01 0.212 0.3694 0.3930 0.7860
100 0.06773 2.04 2.94 0.182 0.3183 0.3387 0.6773 105 0.05858 2.15 2.87 0.158 0.2753 0.2929 0.5858 110 0.05083 2.26 2.80 0.137 0.2389 0.2542 0.5083
www.vishay.com For technical questions contact: nlr.europe@vishay.com 66 Revision: 15-Jun-04
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
2322 640 .....; see note 1
5.272 5.472 5.502 5.103
25
Document Number: 29048
NTC Thermistors, Accuracy Line
T
oper
(°C)
115 0.04426 2.37 2.73 0.1195 0.2080 0.2213 0.4426 120 0.03866 2.47 2.67 0.1044 0.1817 0.1933 0.3866 125 0.03387 2.57 2.61 0.0915 0.1592 0.1694 0.3387 130 0.02977 2.67 2.55 0.0804 0.1399 0.1488 0.2977 135 0.02624 2.77 2.49 0.0709 0.1233 0.1312 0.2624 140 0.02319 2.86 2.43 0.0626 0.1090 0.1160 0.2319 145 0.02055 2.96 2.38 0.0555 0.0966 0.1028 0.2055 150 0.01826 3.05 2.33 0.0493 0.0858 0.0913 0.1826
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
5.272 5.472 5.502 5.103
Vishay BCcomponents
R
2322 640 .....; see note 1
25
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 12 K AND 22 K
R
T
amb
(°C)
40 25.78 6.81 6.09 309.4 567.2
35 19.13 6.16 5.89 229.5 420.8
30 14.32 5.53 5.70 171.8 315.0
25 10.82 4.93 5.52 129.8 238.0
20 8.245 4.35 5.35 98.93 181.4
15 6.335 3.80 5.19 76.02 139.4
10 4.907 3.26 5.03 58.88 107.9
5 3.830 2.74 4.88 45.95 84.25
0 3.011 2.24 4.73 36.13 66.24
5 2.384 1.76 4.60 28.60 52.45 10 1.900 1.30 4.46 22.80 41.81 15 1.525 0.85 4.34 18.30 33.55 20 1.231 0.42 4.21 14.77 27.09 25 1.000 0.00 4.10 12.00 22.00 30 0.8170 0.41 3.98 9.804 17.97 35 0.6712 0.80 3.88 8.054 14.77 40 0.5543 1.19 3.77 6.652 12.20 45 0.4602 1.57 3.67 5.522 10.12 50 0.3839 1.94 3.57 4.607 8.447 55 0.3219 2.30 3.48 3.862 7.081 60 0.2710 2.65 3.39 3.252 5.963 65 0.2293 2.99 3.30 2.751 5.044 70 0.1947 3.33 3.22 2.337 4.284 75 0.1661 3.66 3.14 1.993 3.654 80 0.1422 3.98 3.06 1.707 3.129 85 0.1223 4.29 2.99 1.467 2.690 90 0.1055 4.60 2.92 1.266 2.321 95 0.09135 4.90 2.85 1.096 2.010
100 0.07937 5.19 2.78 0.9524 1.746 105 0.06919 5.48 2.71 0.8302 1.522 110 0.06050 5.76 2.65 0.7260 1.331 115 0.05307 6.04 2.59 0.6369 1.168 120 0.04670 6.31 2.53 0.5604 1.027 125 0.04121 6.57 2.47 0.4945 0.9065
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
2322 640 .....; see note 1
5.123 5.223
25
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 47 K
R
T
amb
(°C)
40 33.81 5.55 6.55 1589
35 24.50 5.02 6.34 1151
30 17.93 4.52 6.15 842.8
25 13.25 4.03 5.96 622.6
Document Number: 29048 For technical questions contact: nlr.europe@vishay.com Revision: 15-Jun-04 67
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
2322 640 .....; see note 1
25
5.473
www.vishay.com
Vishay BCcomponents
T
amb
(°C)
20 9.875 3.56 5.78 464.1
15 7.425 3.10 5.61 349.0
10 5.630 2.67 5.45 264.6
5 4.304 2.24 5.29 202.3
0 3.315 1.84 5.14 155.8
5 2.573 1.44 4.99 120.9 10 2.011 1.07 4.85 94.53 15 1.583 0.70 4.72 74.40 20 1.254 0.34 4.59 58.95 25 1.000 0.00 4.46 47.00 30 0.8024 0.33 4.34 37.71 35 0.6474 0.66 4.23 30.43 40 0.5255 0.98 4.12 24.70 45 0.4288 1.28 4.01 20.15 50 0.3518 1.59 3.91 16.53 55 0.2901 1.88 3.81 13.63 60 0.2403 2.17 3.71 11.30 65 0.2001 2.45 3.62 9.404 70 0.1674 2.72 3.53 7.865 75 0.1406 2.99 3.44 6.607 80 0.1186 3.25 3.36 5.573 85 0.1004 3.51 3.28 4.721 90 0.08542 3.76 3.20 4.015 95 0.07292 4.00 3.13 3.427
100 0.06248 4.24 3.06 2.936 105 0.05372 4.47 2.98 2.525 110 0.04635 4.70 2.92 2.179 115 0.04013 4.93 2.85 1.886 120 0.03485 5.15 2.79 1.638 125 0.03037 5.36 2.73 1.427 130 0.02654 5.57 2.67 1.247 135 0.02326 5.78 2.61 1.093 140 0.02044 5.98 2.55 0.9608 145 0.01802 6.18 2.50 0.8468 150 0.01592 6.37 2.44 0.7483
RT/R
25
R DUE TO
B-TOLERANCE
NTC Thermistors, Accuracy Line
TC
(%)
(%/K)
R
2322 640 .....; see note 1
25
5.473
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 68 K AND 100 K
R
T
amb
(°C)
40 36.66 5.69 6.70 2493 3666
35 26.38 5.15 6.49 1794 2638
30 19.17 4.63 6.29 1303 1917
25 14.06 4.13 6.10 956.2 1406
20 10.41 3.65 5.92 708.0 1041
15 7.779 3.18 5.74 528.9 777.9
10 5.861 2.73 5.57 398.5 586.1
5 4.453 2.30 5.41 302.8 445.3
0 3.409 1.88 5.26 231.8 340.9
5 2.631 1.48 5.11 178.9 263.1 10 2.044 1.09 4.97 139.0 204.4 15 1.600 0.72 4.83 108.8 160.0 20 1.261 0.35 4.70 85.74 126.1 25 1.000 0.00 4.57 68.00 100.0 30 0.7981 0.34 4.45 54.27 79.81 35 0.6408 0.67 4.35 43.57 64.08 40 0.5175 1.00 4.22 35.19 51.74
www.vishay.com For technical questions contact: nlr.europe@vishay.com 68 Revision: 15-Jun-04
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
2322 640 .....; see note 1
6.683 6.104
25
Document Number: 29048
NTC Thermistors, Accuracy Line
T
amb
(°C)
45 0.4202 1.32 4.11 28.57 42.02 50 0.3431 1.63 4.00 23.33 34.31 55 0.2816 1.93 3.90 19.15 28.16 60 0.2322 2.22 3.80 15.79 23.22 65 0.1925 2.51 3.71 13.09 19.25 70 0.1602 2.79 3.62 10.90 16.03 75 0.1340 3.06 3.53 9.114 13.40 80 0.1126 3.33 3.45 7.655 11.26 85 0.09496 3.59 3.36 6.457 9.496 90 0.08042 3.85 3.28 5.469 8.042
95 0.06837 4.10 3.21 4.649 6.837 100 0.05835 4.35 3.13 3.968 5.835 105 0.04998 4.59 3.06 3.399 4.998 110 0.04296 4.82 2.99 2.921 4.296 115 0.03705 5.05 2.92 2.519 3.705 120 0.03206 5.28 2.86 2.180 3.206 125 0.02783 5.50 2.80 1.892 2.783
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
6.683 6.104
Vishay BCcomponents
R
2322 640 .....; see note 1
25
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 470 K
R
T
amb
(°C)
40 48.62 6.22 7.13 22850
35 34.19 5.63 6.91 16068
30 24.28 5.06 6.71 11413
25 17.42 4.51 6.52 8185
20 12.61 3.98 6.33 5926
15 9.211 3.47 6.15 4329
10 6.788 2.98 5.98 3190
5 5.045 2.51 5.82 2371
0 3.781 2.06 5.66 1776
5 2.855 1.62 5.50 1342 10 2.173 1.19 5.36 1021 15 1.666 0.78 5.22 783.0 20 1.286 0.38 5.08 604.6 25 1.000 0.00 4.95 470.0 30 0.7825 0.37 4.82 367.8 35 0.6163 0.74 4.70 289.6 40 0.4883 1.09 4.59 229.5 45 0.3892 1.44 4.47 182.9 50 0.3120 1.77 4.36 146.7 55 0.2515 2.10 4.26 118.2 60 0.2038 2.43 4.15 95.80 65 0.1660 2.74 4.06 78.03 70 0.1359 3.05 3.96 63.88 75 0.1118 3.35 3.87 52.55 80 0.09240 3.64 3.78 43.43 85 0.07670 3.93 3.69 36.05 90 0.06395 4.21 3.61 30.06 95 0.05354 4.48 3.53 25.16
100 0.04501 4.75 3.45 21.15 105 0.03798 5.01 3.37 17.85 110 0.03218 5.27 3.30 15.12 115 0.02736 5.52 3.23 12.86 120 0.02335 5.77 3.16 10.97 125 0.01999 6.01 3.09 9.396
Note
1. Replace dot in last 5 digits of catalog number by a number according to the following details and depending on tolerance on required R25-value: 4 for a tolerance of ±2%; 6 for a tolerance of ±3%; 3 for a tolerance of ±5%; 2 for a tolerance of ±10%.
Document Number: 29048 For technical questions contact: nlr.europe@vishay.com Revision: 15-Jun-04 69
RT/R
25
R DUE TO
B-TOLERANCE
(%)
TC
(%/K)
2322 640 .....; see note 1
25
5.474
www.vishay.com
Loading...