Vishay 10ETS..FP High Voltage Series Data Sheet

10ETS..FP High Voltage Series

Vishay High Power Products

Input Rectifier Diode

TO-220 FULL-PAK, 10 A

DESCRIPTION

TO-220AC FULL-PAK

PRODUCT SUMMARY

VF at 10 A < 1.1 V

I

FSM

V

RRM

cathode

1

Cathode

Base

3

Anode

200 A

800/1200 V

The 10ETS..FP rectifier series has been optimized for very
low forward voltage drop, with moderate leakage. The glass
passivation technology used has reliable operation up to
150 °C junction temperature.

Typical applications are in input rectification and these
products are designed to be used with Vishay HPP switches
and output rectifiers which are available in identical package
outlines.
Fully isolated package (V

= 2500 V

INS

) is UL E78996

RMS

approved

This product has been designed and qualified for industrial
level.

OUTPUT CURRENT IN TYPICAL APPLICATIONS

APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS

Capacitive input filter T
common heatsink of 1 °C/W

= 55 °C, TJ = 125 °C

A

12.0 16.0 A

MAJOR RATINGS AND CHARACTERISTICS

SYMBOL CHARACTERISTICS VALUES UNITS

I

F(AV)

V

RRM

I

FSM

V

F

T

J

Sinusoidal waveform 10 A

Range 800/1200 V

200 A

10 A, TJ = 25 °C 1.1 V

- 40 to 150 °C

VOLTAGE RATINGS

PART NUMBER

10ETS08FP 800 900

10ETS12FP 1200 1300

PEAK REVERSE VOLTAGE

V

, MAXIMUM

V

RRM

V

, MAXIMUM NON-REPETITIVE

RSM

PEAK REVERSE VOLTAGE

V

I

RRM

AT 150 °C

mA

0.5

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum average forward current I

Maximum peak one cycle
non-repetitive surge current

2

Maximum I

Maximum I

Document Number: 93485 For technical questions, contact: [e-mail]
Revision: 26-Aug-08 1

t for fusing I2t

2

√t for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 1450 A2√s

F(AV)

I

FSM

TC = 105 °C, 180° conduction half sine wave 10

10 ms sine pulse, rated V

10 ms sine pulse, no voltage reapplied 200

10 ms sine pulse, rated V

10 ms sine pulse, no voltage reapplied 145

applied 170

RRM

applied 130

RRM

A

2

A

s

www.vishay.com

10ETS..FP High Voltage Series

Vishay High Power Products

Input Rectifier Diode

TO-220 FULL-PAK, 10 A

ELECTRICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum forward voltage drop V

Forward slope resistance r

Threshold voltage V

Maximum reverse leakage current I

FM

F(TO)

RM

THERMAL - MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum junction and storage
temperature range

Maximum thermal resistance,
junction to case

Maximum thermal resistance,
junction to ambient

Typical thermal resistance,
case to heatsink

Approximate weight

Mounting torque

Marking device Case style TO-220 FULL-PAK (94/V0)

minimum 6 (5)

maximum 12 (10)

T

, T

J

R

thJC

R

thJA

R

thCS

10 A, TJ = 25 °C 1.1 V

t

TJ = 150 °C

TJ = 25 °C

T

= 150 °C 0.50

J

Stg

DC operation 2.5

62

Mounting surface, smooth and greased 0.5

V

= Rated V

R

RRM

20 mΩ

0.82 V

0.05

- 40 to 150 °C

2g

0.07 oz.

kgf · cm

(lbf · in)

10ETS08FP

10ETS12FP

mA

°C/W

www.vishay.com For technical questions, contact: [e-mail]
2 Revision: 26-Aug-08

Document Number: 93485

10ETS..FP High Voltage Series

150

140

130

120

110

100

Maximum Allowable

Case Temperature (°C)

90

80

2468 10

0

Average Forward Current (A)

Fig. 1 - Current Rating Characteristics

150

140

130

120

110

Maximum Allowable

Case Temperature (°C)

100

90

30°

0

4268

Average Forward Current (A)

Fig. 2 - Current Rating Characteristics

10ETS.. Series
R

thJC

30°

10ETS.. Series
R

thJC

60°

90°

(DC) = 2.5 °C/W

Conduction angle

60°

90°

120°

(DC) = 2.5 °C/W

Conduction period

120°

180°

10 12 14

Input Rectifier Diode

TO-220 FULL-PAK, 10 A

Ø

Maximum Average

180°

12

Ø

Forward Current (A)

Peak Half Sine Wave

DC

16

18

Vishay High Power Products

20

18

16

14

12

10

Forward Power Loss (W)

200

180

160

140

120

100

80

60

40

DC
180°
120°
90°
60°
30°

RMS limit

8

6

4

2

0

0

2468

Conduction period

10ETS.. Series
T

= 150 °C

J

1210 14

Average Forward Current (A)

Fig. 4 - Forward Power Loss Characteristics

At any rated load condition and with

rated V

10ETS.. Series

1

applied following surge.

RRM

Initial TJ = 150 °C

at 60 Hz 0.0083 s
at 50 Hz 0.0100 s

10

Number of Equal Amplitude

Half Cycle Current Pulses (N)

Fig. 5 - Maximum Non-Repetitive Surge Current

Ø

16

100

16

180°
120°

14

90°
60°

12

30°

10

8

6

Maximum Average

4

Forward Power Loss (W)

2

0

0

246

Average Forward Current (A)

Fig. 3 - Forward Power Loss Characteristics

RMS limit

Ø

Conduction angle

10ETS.. Series
T

= 150 °C

J

8

10

240

220

200

180

160

140

120

100

Forward Current (A)

Peak Half Sine Wave

80

60

40

0.01

Maximum non-repetitive surge current

versus pulse train duration.

10ETS.. Series

0.1

Pulse Train Duration (s)

Fig. 6 - Maximum Non-Repetitive Surge Current

= 150 °C

Initial T

J

at 60 Hz 0.0083 s
at 50 Hz 0.0100 s

1.0

Document Number: 93485 For technical questions, contact: [e-mail]

www.vishay.com

Revision: 26-Aug-08 3

10ETS..FP High Voltage Series

Vishay High Power Products

Instantaneous Forward Current (A)

10

Input Rectifier Diode

TO-220 FULL-PAK, 10 A

100

TJ = 25 °C

TJ = 150 °C

10

10ETS.. Series

1

0.5 1.0 1.5 2.0 2.5

0

Instantaneous Forward Voltage (V)

Fig. 7 - Forward Voltage Drop Characteristics

3.0

Steady state value

(DC operation)

1

- Transient

thJC

Z

Single pulse

D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08

Thermal Impedance (°C/W)

0.1

0.0001 0.001 0.01 0.1 1

Square Wave Pulse Duration (s)

Fig. 8 - Thermal Impedance Z

Characteristics

thJC

10ETS.. Series

10

www.vishay.com For technical questions, contact: [e-mail]

Document Number: 93485

4 Revision: 26-Aug-08

10ETS..FP High Voltage Series

ORDERING INFORMATION TABLE

Device code

10 E T S 12 FP -

1 - Current rating (10 = 10 A)

2 - Circuit configuration:

3

- Package:

4 - Type of silicon:

5 - Voltage rating

6 -

7 - None = Standard production

Input Rectifier Diode

TO-220 FULL-PAK, 10 A

51324

E = Single diode

T = TO-220AC

S = Standard recovery rectifier

FULL-PAK

PbF = Lead (Pb)-free

Vishay High Power Products

67

08 = 800 V

12 = 1200 V

LINKS TO RELATED DOCUMENTS

Dimensions http://www.vishay.com/doc?95005

Part marking information http://www.vishay.com/doc?95009

Document Number: 93485 For technical questions, contact: [e-mail]
Revision: 26-Aug-08 5

www.vishay.com

Assembly
lot code

xxxxxxFP

V P119X

A

TO-220AC FULL-PAK

Part number
FP = FULL-PAK

C

Product version (optional):
P = Lead (Pb)-free
None = Standard
Date code:
Year 1 = 2001
Week 19
Line X

Part Marking Information

Vishay High Power Products

Example: This is a xxxxxxFP with
assembly lot code AC,
assembled on WW 19, 2001
in the assembly line “X”

Document Number: 95009 For technical questions concerning discrete products, contact: [e-mail]
Revision: 30-Oct-08 For technical questions concerning module products, contact: [e-mail]

www.vishay.com

1

DIMENSIONS in millimeters

Outline Dimensions

Vishay High Power Products

TO-220AC FULL-PAK

R 0.7
R 0.5

16.4

15.4

2.54 TYP.

(2 places)

5° ± 0.5°

10.6

10.4

0.9

0.7

2.54 TYP.

5° ± 0.5°

3.7

3.2

Hole Ø

7.1

6.7

4.8

4.6

3.4

3.1

16.0

15.

2.8

2.6

8

10°

0.48

0.44

2.85

2.65

3.3

3.1

1.4

1.3

1.15

1.05

13.56

13.05

TYP.

Document Number: 95005 For technical questions concerning discrete products, contact: [e-mail]
Revision: 03-Dec-08 For technical questions concerning module products, contact: [e-mail]

www.vishay.com

1

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1