VISHAY 109D Operation Manual

109D
Vishay
Wet Tantalum Capacitors Sintered Anode TANTALEX
Capacitors for Operation to + 125 °C, Elastomer-Sealed
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C. (to + 125 °C with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 % standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL max.):
At + 25 °C, + 85 °C, + 125 °C: Leakage current shall not exceed the values listed in the Standard Ratings Tables.
Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 °C or + 125 °C at the applicable DC working voltage.
®
FEATURES
Terminations: standard tin/lead (SnPb), 100 % tin (RoHS compliant) available
Vishay Sprague model 109D tubular elastomer-sealed, sintered anode T
ANTALEX
capacitors fill the basic requirements for applications where a superior quality, reliable design for industrial, automotive and telecommunications application is desired.
Model 109D capacitors are the commercial equivalents of
Tansitor style WC, UWC, Mallory-NACC style TLS, TLH and the Military Style CL64 and CL65, designed to meet the performance requirements of Military Specification MIL-DTL-3965.
Following the life test:
1. DCL shall not exceed the initial requirements or 1 µA,
whichever is greater.
2. The ESR shall meet the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement. For capacitors with voltage ratings of 15 WVDC and below, change in capacitance shall not exceed + 10 %, - 25 % from the initial measurement.
®
Pb-free
Available
RoHS*
COMPLIANT
ORDERING INFORMATION
109D 207 X0 006 C 0 E3
MODEL CAPACITANCE CAPACITANCE
This is expressed in picofarads. The first two digits are
the significant
figures. The third
is the number of
zeros to follow
Note Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
the unit weight.
TOLERANCE
X0 = ± 20 % X9 = ± 10 %
X5 = ± 5 %
Special Order
DC VOLTAGE RATING
AT + 85 °C
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
CASE CODE STYLE NUMBER RoHS COMPLIANT
See Ratings
and
Case Codes
Ta bl e
0 = No outer sleeve.
Standard
2 = Outer plastic film
insulation
E3 = 100 % tin termination
(RoHS compliant)
Blank = SnPb termination
(standard design)
DIMENSIONS in inches [millimeters]
L
- +
CASE
CODE
C 0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41] 0.219 [5.56] 0.608 [15.45] 1.500 ± 0.250 [38.10 ± 6.35] F 0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41] 0.312 [7.92] 0.796 [20.22] 2.250 ± 0.250 [57.15 ± 6.35] T 0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41] 0.406 [10.31] 0.921 [23.40] 2.250 ± 0.250 [57.15 ± 6.35]
(1)
0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 - 0.016 [26.97 + 0.79 - 0.41] 0.406 [10.31] 1.217 [30.91] 2.250 ± 0.250 [57.15 ± 6.35]
K
Note
(1)
Replaces previous W case.
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com For technical questions, contact: wettants@vishay.com 12 Revision: 17-Mar-08
D L D Max. L Max.
BARE TUBE
0.250 [6.35] Max.
0.025 [6.35] Dia. (No. 22 AWG) Tinned Solderable Leads
WITH PLASTIC-FILM
INSULATING SLEEVE
D
LEAD LENGTH
Document Number: 40023
109D
Wet Tantalum Capacitors Sintered Anode TANTALEX
Capacitors for Operation to + 125 °C, Elastomer-Sealed
STANDARD RATINGS
MAX. ESR
CAPACITANCE
(µF)
68 C 109D686X0006C0 4 60 1 2 - 40 + 14 + 16
140 F 109D147X0006F0 2 40 1 3 - 40 + 14 + 16
270 F 109D277X0006F0 4 25 1 7 - 44 + 17.5 + 20
560 T 109D567X0006T0 3 25 2 13 - 64 + 17.5 + 20
1200 K 109D128X0006K0 1.6 20 3 14 - 80 + 25 + 25
22 C 109D226X0008C0 6 115 1 2 -40 + 10.5 + 12
220 F 109D227X0008F0 4 30 1 7 - 44 + 17.5 + 20
20 C 109D206X0010C0 5 175 1 2 - 32 + 10.5 + 12
47 C 109D476X0010C0 5 100 1 2 - 36 + 14 + 16
180 F 109D187X0010F0 4 40 1 7 - 36 + 14 + 16
390 T 109D397X0010T0 3 25 2 16 - 64 + 17.5 + 20
15 C 109D156X0015C0 6 155 1 2 - 24 + 10.5 + 12
33 C 109D336X0015C0 5 90 1 2 - 28 + 14 + 16
120 F 109D127X0015F0 4 50 1 7 - 28 + 17.5 + 20
270 T 109D277X0015T0 3 30 2 16 - 56 + 17.5 + 20
540 K 109D547X0015K0 1.2 23 6 24 - 80 + 25 + 25
10 C 109D106X0025C0 6 220 1 2 - 16 + 8 + 9
22 C 109D226X0025C0 5 140 1 3 - 20 + 10.5 + 12
50 F 109D506X0025F0 4 70 1 5 - 28 + 13 + 15
100 F 109D107X0025F0 4 50 1 10 - 28 + 13 + 15
100 T 109D107X0025T0 4 45 2 10 - 48 + 13 + 15
180 T 109D187X0025T0 4 32 2 18 - 48 + 13 + 15
350 K 109D357X0025K0 1.3 24 7 28 - 70 + 25 + 25
7 C 109D705X0030C0 8 275 1 2 - 16 + 8 + 12
8 C 109D805X0030C0 7.5 275 1 2 - 16 + 8 + 12
15 C 109D156X0030C0 8 175 1 2 - 20 + 10.5 + 12
40 F 109D406X0030F0 4 65 1 5 - 24 + 10.5 + 12
68 F 109D686X0030F0 6 60 1 8 - 24 + 13 + 15
100 T 109D107X0030T0 6 40 2 12 - 28 + 10.5 + 12
150 T 109D157X0030T0 4.1 35 2 18 - 48 + 13 + 15
300 K 109D307X0030K0 1.6 25 8 32 - 60 + 25 + 25
Note
(1)
Part Numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number. For RoHS compliant add “E3“.
CASE CODE
PART NUMBER
(1)
6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C
at + 25 °C 120 Hz
(Ω)
MAX. IMP.
at
- 55 °C 120 Hz
(Ω)
MAX. DCL (µA)
at
+ 25 °C
+ 85 °C
+ 125 °C
®
MAX. CAPACITANCE CHANGE (%)
- 55 °C + 85 °C + 125 °C
Vishay
at
Document Number: 40023 For technical questions, contact: wettants@vishay.com Revision: 17-Mar-08 13
www.vishay.com
109D
Vishay
Wet Tantalum Capacitors Sintered Anode TANTALEX
Capacitors for Operation to + 125 °C, Elastomer-Sealed
STANDARD RATINGS
MAX. ESR
CAPACITANCE
(µF)
4.5 C 109D455X0050C0 9 400 1 2 - 16 + 5 + 6
5 C 109D505X0050C0 9 400 1 2 - 16 + 5 + 6
10 C 109D106X0050C0 8 250 1 2 - 24 + 8 + 9
22 F 109D226X0050F0 7 95 1 4 - 20 + 10.5 + 12
25 F 109D256X0050F0 6 95 1 5 - 20 + 10.5 + 12
47 F 109D476X0050F0 6 70 1 9 - 28 + 13 + 15
60 T 109D606X0050T0 3 45 2 12 - 16 + 10.5 + 12
82 T 109D826X0050T0 4 45 2 16 - 32 + 13 + 15
160 K 109D167X0050K0 2.2 27 8 32 - 50 + 25 + 25
4 C 109D405X0060C0 10 550 1 2 - 16 + 5 + 6
8.2 C 109D825X0060C0 8 275 1 2 - 24 + 8 + 9
20 F 109D206X0060F0 5 105 1 5 - 16 + 10.5 + 12
39 F 109D396X0060F0 7 90 1 9 - 28 + 10.5 + 12
50 T 109D506X0060T0 4 50 2 12 - 16 + 10.5 + 12
68 T 109D686X0060T0 6 50 2 16 - 32 + 10.5 + 12
140 K 109D147X0060K0 2.4 28 8 32 - 40 + 20 + 20
3.5 C 109D355X0075C0 10 650 1 2 - 16 + 5 + 6
6.8 C 109D685X0075C0 8 300 1 2 - 20 + 8 + 9
13 F 109D136X0075F0 6 160 1 4 - 16 + 8 + 9
15 F 109D156X0075F0 6.5 150 1 5 - 16 + 8 + 9
33 F 109D336X0075F0 7 90 1 10 - 24 + 10.5 + 15
40 T 109D406X0075T0 5 60 2 12 - 16 + 10.5 + 12
56 T 109D566X0075T0 6 60 2 17 - 28 + 10.5 + 15
110 K 109D117X0075K0 3.1 29 9 36 - 35 + 20 + 20
2.5 C 109D255X0100C0 26.5 950 1 2 - 16 + 7 + 8
3.0 C 109D305X0100C0 10 800 1 2 - 16 + 7 + 8
4.7 C 109D475X0100C0 10 500 1 2 - 16 + 7 + 8
10 F 109D106X0100F0 6 215 1 4 - 16 + 7 + 8
11 F 109D116X0100F0 6 200 1 4 - 16 + 7 + 8
22 F 109D226X0100F0 7 100 1 9 - 16 + 7 + 8
30 T 109D306X0100T0 4 80 2 12 - 16 + 7 + 8
43 T 109D436X0100T0 6 70 2 17 - 20 + 7 + 8
1.7 C 109D175X0125C0 54.6 1250 1 2 - 16 + 7 + 8
3.6 C 109D365X0125C0 15 600 1 2 - 16 + 7 + 8
9 F 109D905X0125F0 15 240 1 5 - 16 + 7 + 8
14 F 109D146X0125F0 12 167 1 7 - 16 + 7 + 8
25 T 109D256X0125T0 10 93 2 13 - 16 + 7 + 8
Note
(1)
Part Numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number. For RoHS compliant add “E3“.
www.vishay.com For technical questions, contact: wettants@vishay.com 14 Revision: 17-Mar-08
CASE CODE
PART NU M B E R
(1)
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C
60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C
at
+ 25 °C
120 Hz
(Ω)
MAX. IMP.
at
- 55 °C 120 Hz
(Ω)
MAX. DCL (µA)
at
+ 25 °C
+ 85 °C
+ 125 °C
®
MAX. CAPACITANCE CHANGE (%)
at
- 55 °C + 85 °C + 125 °C
Document Number: 40023
109D
Wet Tantalum Capacitors Sintered Anode TANTALEX
Capacitors for Operation to + 125 °C, Elastomer-Sealed
EXTENDED RATINGS
MAX. ESR
CAPACITANCE
(µF)
820 F 109D827X0006F0 2.5 18 3 14 - 88 + 16 + 20
1500 T 109D158X0006T0 1.5 18 5 20 - 90 + 20 + 25
2200 K 109D228X0006K0 1 13 6 24 - 90 + 25 + 30
680 F 109D687X0008F0 2.5 22 3 14 - 83 + 16 + 20
120 C 109D127X0010C0 4 60 2 9 - 45 + 13 + 16
150 C 109D157X0010C0 3 54 2 9 - 55 + 13 + 16
470 F 109D477X0010F0 2.5 30 3 16 - 65 + 16 + 20
560 F 109D567X0010F0 2.5 27 3 16 - 77 + 16 + 20
1000 T 109D108X0010T0 1.5 20 5 20 - 75 + 20 + 25
1200 T 109D128X0010T0 1.5 18 5 20 - 88 + 20 + 25
1200 K 109D128X0010K0 1 18 7 25 - 75 + 30 + 30
1500 K 109D158X0010K0 1 15 7 25 - 88 + 25 + 30
82 C 109D826X0015C0 4 80 2 9 - 38 + 13 + 16
100 C 109D107X0015C0 4 72 2 9 - 44 + 13 + 16
330 F 109D337X0015F0 2.5 35 3 16 - 60 + 16 + 20
390 F 109D397X0015F0 2.5 31 3 16 - 66 + 16 + 20
820 T 109D827X0015T0 1.8 22 6 24 - 77 + 20 + 25
820 K 109D827X0015K0 1.2 20 8 32 - 70 + 30 + 30
1000 K 109D108X0015K0 1.2 17 8 32 - 77 + 25 + 30
68 C 109D686X0025C0 4.3 90 2 9 - 40 + 12 + 15
270 F 109D277X0025F0 2.7 33 3 16 - 62 + 13 + 16
560 T 109D567X0025T0 1.8 24 7 28 - 72 + 20 + 25
680 K 109D687X0025K0 1.2 19 8 32 - 72 + 25 + 30
39 C 109D396X0030C0 5.2 110 2 - 28 + 10 + 12
47 C 109D476X0030C0 5.2 100 2 9 - 30 + 10 + 12
56 C 109D566X0030C0 5.2 100 2 9 - 38 + 12 + 15
150 F 109D157X0030F0 2.5 40 3 9 - 40 + 12 + 15
180 F 109D187X0030F0 2.5 40 3 16 - 45 + 13 + 16
220 F 109D227X0030F0 2.5 36 3 16 - 60 + 13 + 16
330 T 109D337X0030T0 1.8 28 8 16 - 45 + 20 + 25
390 T 109D397X0030T0 1.8 28 8 32 - 50 + 20 + 25
470 T 109D477X0030T0 1.8 25 8 32 - 65 + 20 + 25
560 K 109D567X0030K0 1.3 20 9 32 - 65 + 25 + 30
Note
(1)
Part Numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number. For RoHS compliant add “E3“.
CASE CODE
PART NUMBER
(1)
6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C
at + 25 °C 120 Hz
(Ω)
MAX. IMP.
at
- 55 °C 120 Hz
(Ω)
MAX. DCL (µA)
at
+ 25 °C
+ 85 °C
+ 125 °C
®
MAX. CAPACITANCE CHANGE (%)
- 55 °C + 85 °C + 125 °C
Vishay
at
Document Number: 40023 For technical questions, contact: wettants@vishay.com Revision: 17-Mar-08 15
www.vishay.com
109D
Vishay
Wet Tantalum Capacitors Sintered Anode TANTALEX
Capacitors for Operation to + 125 °C, Elastomer-Sealed
EXTENDED RATINGS
MAX. ESR
CAPACITANCE
(µF)
33 C 109D336X0050C0 5 135 2 9 - 29 + 10 + 12
120 F 109D127X0050F0 2.5 49 4 24 - 42 + 12 + 15
270 T 109D277X0050T0 1.8 29 8 32 - 46 + 20 + 25
330 K 109D337X0050K0 1.5 22 9 36 - 46 + 25 + 30
27 C 109D276X0060C0 5 144 3 12 - 24 + 10 + 12
68 F 109D686X0060F0 3 60 3 20 - 30 + 12 + 15
100 F 109D107X0060F0 2.5 54 4 20 - 36 + 12 + 15
140 T 109D147X0060T0 2 32 8 32 - 30 + 16 + 20
220 T 109D227X0060T0 1.8 29 8 32 - 40 + 16 + 20
270 K 109D277X0060K0 1.5 23 9 36 - 45 + 20 + 25
12 C 109D126X0075C0 5 175 2 12 - 12 + 8 + 10
15 C 109D156X0075C0 5 160 2 12 - 14 + 10 + 12
22 C 109D226X0075C0 5 157 3 12 - 19 + 10 + 12
47 F 109D476X0075F0 3 75 4 24 - 18 + 10 + 12
56 F 109D566X0075F0 3 70 4 24 - 20 + 12 + 15
82 F 109D826X0075F0 2.5 63 4 24 - 30 + 12 + 15
110 T 109D117X0075T0 2 33 9 36 - 25 + 16 + 20
180 T 109D187X0075T0 1.8 30 9 36 - 35 + 16 + 20
220 K 109D227X0075K0 2.2 24 10 40 - 40 + 20 + 25
8.2 C 109D825X0100C0 6 250 3 12 - 12 + 12 + 12
10 C 109D106X0100C0 6 200 3 12 - 17 + 10 + 12
33 F 109D336X0100F0 3.5 85 4 24 - 18 + 15 + 15
39 F 109D396X0100F0 3.5 80 5 24 - 20 + 12 + 15
56 T 109D566X0100T0 2.2 45 9 36 - 20 + 15 + 15
68 T 109D686X0100T0 2.2 40 10 40 - 30 + 14 + 16
86 K 109D866X0100K0 3.2 30 10 40 - 25 + 15 + 15
6.8 C 109D685X0125C0 11.7 300 3 12 - 14 + 10 + 12
27 F 109D276X0125F0 3.5 90 5 24 - 18 + 12 + 15
47 T 109D476X0125T0 2.2 50 10 40 - 26 + 14 + 16
56 K 109D566X0125K0 4.1 32 10 40 - 25 + 15 + 15
Note
(1)
Part Numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the Part Number. For RoHS compliant add “E3“.
CASE CODE
PART NU M B E R
(1)
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C
60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C
at
+ 25 °C
120 Hz
(Ω)
MAX. IMP.
at
- 55 °C 120 Hz
(Ω)
MAX. DCL (µA)
at
+ 25 °C
+ 85 °C
+ 125 °C
®
MAX. CAPACITANCE CHANGE (%)
at
- 55 °C + 85 °C + 125 °C
www.vishay.com For technical questions, contact: wettants@vishay.com 16 Revision: 17-Mar-08
Document Number: 40023
Legal Disclaimer Notice
Vishay

Disclaimer

All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1
Loading...