Visart DF-100 Operation Instructions Manual

OPERATION INSTRUCTIONS
7 PORTABLE TV with built-in multimedia Card Player

Check List

1. Introduction

2. Safety Precautions

3. Installation Instructions

4. Remote Control Guide

5. Setup Menu

5.1 SETUP MENU - MAIN PAGE

5.2 SETUP MENU - PHOTO

5.3 SETUP MENU - MUSIC

5.4 SETUP MENU - SLIDE SHOW

5.5 SETUP MENU - MOVIE

5.6 SETUP MENU - PREFERENCES PAGE

6. OSD Setup Guide

6.1 AV Mode

6.1.1 VIDEO ADJUST

6.1.2 OSD ADJUST

6.1.3 INPUT SELECT

6.1.4 AUDIO

6.1.5 LANGUAGE SELECT

6.1.6 EXIT

6.2 TV Mode Settings

6.2.1 TV FUNCTION

6.2.2 TV MODE

7. TV Operation

7.1 AUTO CHANNEL SEARCH

7.2 CHANNEL SELECTION

7.3 DISPLAY CHANNEL

7.4 CHANNEL RECALL

8.

Specifications

5.7 SETUP MENU - EXIT SETUP

AV Input User Instruction

9. Product

1

1

1- 3

3- 5

5-10

5-6

6

7

7- 8

8

8-10

10

10-14

10-13

11

11

12

12

12

13

13-14

13

13-14

14

15

15

15

15

15

16

Table of Contents

Dear Customer:
Welcome to the splendid Portable TV. Now you may enjoy new visual experiences
and surprises from the marriage of advanced digital technology and new life philosophy.
To fully apply the product, please read the manual carefully and keep it for later reference.

Check List

1) Portable TV (1)

2) TV Stand (1)

3) Remote Control (1)

4) AV Cable (1)

5) CATV Cable (1)

6) Headphone (1)

7) Power Supply (1)

8) Warranty Card (1)

9) User Manual (1)

Introduction

7 Portable TV supports:
JPEG picture file.
WMA, MP3 sound files.
MPEG1, MPEG2 video files.
Background sound playing
13 different picture playing Modes.

CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE seven types of memory cards.
　　AV Input/Output
　　TV

Remote control support.

Safety Precautions

Please be aware of the following precautions.

1.Handle it carefully. Place machine on a soft cloth or surface before installation in order to
prevent for scratches.

2.Spray a little of cleaner on soft cloth and wipe the panel.

3.Do not block the vent to prevent overheating.

4.Never disassemble or perform self-maintenance and repair, since opening or removing
cover plate may cause high-voltage electric shock or other dangers. Have a qualified
technician perform all product maintenance.

Installation Instructions

When you open the box, make sure the following components are not missing.

If you have any questions, please contact the retailer.

- 1 -

- 2 -

Fig. 1

2. Top View（Fig. 2）：

Fig. 2

3. Back View（Fig. 3）：

Fig. 3

Remote Sensor

1. Front View（ Fig. 1）：

Multimedia Card Slots

Two slots for CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE: 7 types of memory
cards supports.
The details for button and the slots for multimedia memory card, please refer to the
following details instructions. The button for changing frame, press this button, you can
change the front frame.

Wall Hanging: can install onto the surface of a wall.
Table Stand: use the stand to support the DIGITAL ALBUM for weight support.

Hanging Holes

Stand

Buttons

Frame Exchanged Button

Signal Connection Port

Power

Fig. 5

4. Button Instructions（Right-hand side）（ Fig. 5）：

lTV : Connects with TV signal.
lVIDEO IN/OUT

l

l : Headphone Input (Sound export)，can connect to headphone.
lDC12V: Power input，install the power cord into the DC12V input.

: Connects with VIDEO cable, the port will be input under video playing and

output status, under media and TV playing.

AUDIO IN: Connects with AUDIO cable.

Instruction：

lPower: on/off switch.

lMODE: Mode change, can switch TV、MEDIA PLAYER、AV.

l : Multifunction support

1.Before selecting any option, press buttons for volume control

2.Under TV, the buttons are for TV channel switch.

3.Under OSD menu, the buttons are for selecting menu options and adjustments.
lMENU: Highlight OSD menu.

Remote Control Guide

Input Introduction:（Fig. 4）：

DC12V

TV

Fig. 4

POWER

MODE

MENU

- 3 -

VIDEO IN/OUT

AUDIO IN

1 POWER Press it to turn the machine on or off

2 MUSIC In selection menu, press the“ MUSIC” key will select the music

files. If do not select any files, then system will automatically play
the first music file. (Media Player Mode)

3 PHOTO In selection menu，press the“PHOTO” key will select the

picture files. If do not select any files, then the system will
automatically play the first picture file. (Media Player Mode)

4 MOVIE In selection menu, press the“ MOVIE”key will select the movie

files. If do not select any files, then the system will automatically
play the first movie file. (Media Player Mode)
5 SETUP Press for setup menu. Press setup again to exit the setup menu.
(Media Player Mode)
6 MENU Press it to setup the System.
7 ZOOM Under the play selection, if the picture size does not match with the

frame, then use the “ZOOM” button to enlarge the picture. Press

once for double the size, twice for triple the size, three times for
four times the size, and four times for the original size. After

enlarging the picture, use the“ ” for surface adjustments.
8 ROTATE Under the play selection, use the “ROTATE” key for picture

rotation. Rotate key only works under PHOTO menu.
9 PLAY 1.Play and pause function. (Media Player Mode)

2.When playing a picture and a music at the same time. Press once
to stop playing the picture, press twice to stop both picture and
music playing, and press three times to restore playing.

11 STOP Under play mode, press the“STOP” button to stop playing.

(Media Player Mode)
12 MODE Switch Picture display modes. There are 13 different display modes.

10/18　 UP/DOWN In OSD menu, up and down switch.(　　　　 )

13/15 LEFT/RIGHT In OSD menu, left and right switch. ( ), In setting, press for
increase and decrease adjustment.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

POWER
MUSIC
PHOTO
MOVIE
SETUP
MENU
ZOOM
ROTATE
PLAY
UP
STOP
MODE
LEFT
ENTER
RIGHT
MUTE
0
DOWN
VOLUME
VOLUME
NUMBER KEY
REPEAT
DISPLAY
GOTO

- 4 -

CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type.

14 ENTER Select an option from a menu.
16 MUTE Mute (Sound off).
19/20 VOLUME Volume control.
17/21 NUMBER Numbers: from 0 to 9.
Under media play selection, can press the number to select
files, such as MP3, JPEG, WMA, MPEG files.
Under TV mode, use the numbers for channel selection.
Press Enter for instant channel change. (Or wait 2 seconds
for auto channel change)
22REPEAT Under media play selection, press REPEAT to have MP3,
MPEG or picture files repeat its play function.
23DISPLAY Under media play selection, use the DISPLAY key to have
picture and music to play at the same time (Background
music).
24GOTO In Photo, music, video, or file, user can switch between these
4 modes. As shown under the picture below.

５

Setup Menu

Fig. 6

Playing multimedia Files

1.Go back to product description for instruction on how to insert memory card into the
slots.

Reminder： Support CF,SM,MS,MS PRO,SD,MMC, IBM MICRODRIVE: 7 different

types of memory cards.

2.display photo：press PHOTO key，and enter the photo menu. Use number keys (1-9)

for photo selection and press ENTER to select the photo.

3.display music：press MUSIC key, and enter music menu. Controlling instruction is the

same as above.

4.display movie：press MOVIE key， and enter movie menu. Controlling instruction is

the same as above.

5.When playing the above media, press PLAY to pause and press again to continue. Press
STOP to stop playing.

6.Background music(Can play music and photo at the same time):

1)Under PHOTO menu display mode, press DISPLAY can play photo and music at the
same time. The first music and the first picture will be played at the same time.

2)Under MUSIC menu display mode, press DISPLAY and same instruction as above.

3)When music and photo is playing at the same time. Press PLAY once to stop playing
photo, twice for both music and photo, and the third time to continue playing both.

7.For other user instruction please go to Remote Control instruction.

SM

SD、MMC、MS

MS PRO

CF
IBM MICRODRIVE

/2

5.1 SETUP MENU-MAIN PAGE

- 5 -

- 6 -

SETUP MENU-MAIN PAGE

Press SETUP key on remote control to open
SETUP MENU.

PHOTO SETUP (Change Photo settings）
MUSIC SETUP (Change Music settings）

SLIDE SHOW SETUP (Change Slide show

settings）
MOVIE SETUP (Change Movie settings）
PREFERENCES (Change Menu settings）

EXIT SETUP (Exit MAIN PAGE)

MAIN PAGE

GENERAL SETUP

5.2 SETUP MENU-PHOTO

PHOTO transition mode function setup

FAST

NORMAL SLOW

1.Enter PHOTO SETUP menu.

2.Press ( 、 ) to highlight ORIENTATION，press
（　）to show submenu on the right. Press（　　、）to
select desired item. Press （ENTER）to save.

3.Press（　） to return to previous menu. Select
MAIN PAGE then press（ENTER） to return to

previous menu.

THUMBNAIL DIGEST

TRANSITION MODE

ORIENTATION

MAIN PAGE

TRANSITION MODE

PHOTO-TRANSITION MODE

FAST
NORMAL
SLOW

PHOTO Orientation Function Setup

THUMBNAIL DIGEST

TRANSITION MODE

ORIENTATION

MAIN PAGE

ORIENTATION

PHOTO-ORIENTATION

DEFAULTS
IGNORE

DEFAULTS

IGNORE

PHOTO Thumbnail Digest Function Setup

1.Enter MAIN PAGE.

2.Press ENTER key to enter submenu PHOTO

3.Press to highlight your choice, 　Press ( , )

to highlight item to change, press ENTER to save.

4.Press ( ) to go back to upper menu. then
highlight MAIN PAGE to go back to previous menu.

THUMBNAIL DIGEST

TRANSITION MODE

ORIENTATION

MAIN PAGE

SETUP MENU--PHOTO

PHOTO-THUMBNAIL DIGEST

ON: Turn the function on OFF: Turn this function off

1. Enter PHOTO SETUP menu.

2. Press（　、）to highlight ORIENTATION，press
（　）to show submenu on the right. Press（　　、　）
　　to select desired item. Press （ ENTER）to save.

3. Press（　） to return to previous menu. Select
MAIN PAGE then press（ENTER） to return to

previous menu.

SETUP MENU--MUSIC

REPEAT MODE

MAIN PAGE

SETUP MENU--MUSIC

MUSIC-REPEAT MODE

ONE

ALL

OFF

ONE: Repeat one music file.（ MP3）

ALL: Repeat all music files.

OFF: Turn Repeat function off.

SETUP MENU--SLIDE SHOW

SLIDESHOW MODE

FOLDER REPEAT

INTERVAL TIME

TRANSITION
AUTO START

MAIN PAGE

SLIDESHOW MODE

SLIDE SHOW-SLIDE SHOW MODE

MANUAL

AUTO

SLIDE SHOW Playing Function Setup

MANUAL: Slide show plays manually.

AUTO: Slide show plays automatically.

SETUP MENU--SLIDE SHOW

SLIDESHOW MODE

FOLDER REPEAT

INTERVAL TIME

TRANSITION
AUTO START

MAIN PAGE

FOLDER REPEAT

SLIDE SHOW-FOLDER REPEAT

ON
OFF

SLIDE SHOW Folder Repeat Function Setup

ON: Turn Folder Repeat function on.

OFF: Turn Folder Repeat function off.

SETUP MENU--SLIDE SHOW

SLIDESHOW MODE

FOLDER REPEAT

INTERVAL TIME

TRANSITION
AUTO START

MAIN PAGE

INTERVAL TIME

SLIDE SHOW-INTERVAL TIME

ONE SECOND
THREE SECONDS
FIVE SECONDS
TEN SECONDS

SLIDE SHOW Interval Time Setup

ONE SECOND

THREE SECONDS

FIVE SECONDS

TEN SECONDS

5.4 SETUP MENU-SLIDE SHOW

5.3 SETUP MENU-MUSIC

MUSIC Repeat Function Setup

Instruction same as above

Instruction same as above

- 7 -

SETUP MENU--SLIDE SHOW

SLIDESHOW MODE

FOLDER REPEAT

INTERVAL TIME

TRANSITION

AUTO START

MAIN PAGE

TRANSITION

SLIDE SHOW-TRANSITION

SLIDE SHOW Transition function Setup
FULL SCREEN

FULL SCREEN
TOP->BOTTOM
BOTTOM->TOP
T/B->CENTER
CENTER->T/B
BLIND: T/B
LEFT->RIGHT
RIGHT->LERT
L/R->CENTER

TOP->BOTTOM
BOTTOM->TOP
T/B->CENTER
CENTER->T/B
BLIND:T/B
LEFT->RIGHT
RIGHT->LEFT
L/R->CENTER

From top to bottom
From bottom to top
From top/bottom to center
From Center to Top/bottom.
Blinder
From left to right
From right to left
From left/right to center

SETUP MENU--SLIDE SHOW

SLIDESHOW MODE

FOLDER REPEAT

INTERVAL TIME

TRANSITION
AUTO START

MAIN PAGE

AUTO START

SLIDE SHOW-AUTO START

ON
OFF

SLIDE SHOW Auto Start Function Setup

ON: Turn AUTO START on.

OFF: Turn AUTO START off.

INTERVAL TIME

REPEAT MODE

MAIN PAGE

INTERVAL TIME

MOVIE-INTERVAL TIME

SETUP MENU--MOVIE

FAST
NORMAL

MOVIE INTERVAL Time Function Setup

FAST

NORMAL

INTERVAL TIME

REPEAT MODE

MAIN PAGE

REPEAT MODE

MOVIE-REPEAT MODE

SETUP MENU--MOVIE

OFF
ONE
ALL

MOVIE Repeat Mode Setup

OFF： Turn Repeat function off.

ONE： Repeat one movie file.

ALL： Repeat all movie file.

5.5 SETUP MENU-MOVIE

5.6 SETUP MENU-PREFERENCES PAGE

- 8 -

PREFERENCES PAGE

TV TYPE

VIDEO OUTPUT

OSD LANG

OSD MESSAGE

DEFAULTS

MAIN PAGE

SET TV TYPE

PREFERENCES PAGE-TV TYPE

MULTI SYSTEM
NTSC
PAL

MULTISYSTEM: Change TV system
(Media Player) automatically.

NTSC: For U.S. And Japan

PAL: For countries adopts PAL system.

PREFERENCES PAGE

TV TYPE

VIDEO OUTPUT

OSD LANG

OSD MESSAGE

DEFAULTS

MAIN PAGE

SET VIDEO OUTPUT

S-VIDEO
YPBPR
RGB

PREFERENCES PAGE-VIDEO OUTPUT

YPBPR: YPBPR signal output．

RGB: RGB signal output.
Attention: Don t change this item.

PREFERENCES PAGE

TV TYPE

VIDEO OUTPUT

OSD LANG

OSD MESSAGE

DEFAULTS

MAIN PAGE

SET OSD LANGUAGE

ENGLISH
CHINESE

PREFERENCES PAGE-OSD LANG

PREFERENCES PAGE

TV TYPE

VIDEO OUTPUT

OSD LANG

OSD MESSAGE

DEFAULTS

MAIN PAGE

OSD MESSAGE

ON
OFF

PREFERENCES PAGE OSD MESSAGE
Setup

PREFERENCES PAGE-OSD MESSAGE

PREFERENCES PAGE

TV TYPE

VIDEO OUTPUT

OSD LANG

OSD MESSAGE

DEFAULTS

MAIN PAGE

OSD DEFAULTS

RESET

PREFERENCES PAGE DEFAULTS Setup

RESET: Restore manufacturer's default
settings.

PREFERENCES PAGE-DEFAULTS

PREFERENCES PAGE TV Type function
Setup

PREFERENCES PAGE VIDEO OUTPUT
Setup

S-VIDEO:S-Video signal output.

ENGLISH: OSD in English.

CHINESE: OSD in Chinese.

ON: Turn OSD MESSAGE on.

OFF: Turn OSD MESSAGE off.

PREFERENCES PAGE OSD Language Setup

- 9 -

Note:

PREFERENCES PAGE DEFAULTS is active only in initial status by press SETUP key.
If not, please press GOTO key to return to initial status.

６

6.1 AV Mode

OSD Setup Guide

MAIN PAGE

GENERAL SETUP

Press（　　、　）to highlight EXIT SETUP

Press ENTER to exit OSD menu.

MAIN PAGE EXIT SETUP

5.7 SETUP MENU-EXIT SETUP

Remote Control Operation

Press MENU to highlight the OSD setting,　press ，to select submenu,　press ，to

select aimed variable, then press to adjust numerical variable; If the variable is not
numerical( such as TV , VIDEO ), press to select aimed variable, then press
ENTER to confirm. Press RETURN button at the submenu to return till exit OSD, or you
can wait for OSD exit automatically (please reference the detail OSD menu closing time
setting).

On-machine Button Operation

Press MENU to highlight the OSD setting,　press
，to select submenu,　press ，to select

aimed variable, then press MENU highlight the

MENU, and press to adjust parameters，
Press MENU to highlight it，then press to
adjust the parameters，to adjust the finest item，

then MENU , so that can save the preset
parameters and finish all the parameters adjusting
operations.

Tips: You can also press ENTER or MENU buttons on remote control or OSD on the
machine to return till exit the OSD setting.

VIDEO and MEDIA PLAYER Mode
The Specific Menus:

The specific of Menus are different for each mode of VIDEO、 TV、
MEDIA PLAYER, However, the same for VIDEO ａｎｄ　MEDIA PLAYER Menus

Select Menu:

VIDEO ADJUST
OSD ADJUST
INPUT SELECT
AUDIO
LANGUAGE SELECT
EXIT

POWER

MODE

MENU

- 10 -

TIMER SET

RETURN

H-POSITION
V-POSITION
TIMER SET

Move horizontally
Move vertically
Timer function

6.1.2 OSD ADJUST

OSD-OFF TIME
OSD-TRANSPARENT
RETURN

OSD auto off time setup
OSD Transparency
Return to Menu

TIMER SET is to set up the clock's On/Off time. It appears in the upper right corner of the
screen. Timer is in function only "Timer On" is selected. Press or to turn TIMER on

or off. Press or to switch between ON, OFF, TIME, TIMER　 ON and TIMER OFF.

When timer is on, three selections will be displayed on the screen, including ON (On

Time) 、 OFF (Off Time) and TIME (Current Time) . Press numbered keys to adjust to the

correct time. If the current time is 13:15:41, press 1, 3, 1, 5, 4, 1 as the arrow flashes.
Confirm it after time adjust.
ON: System is off, internal clock still runs, when it's time to start, system will be
automatically turned on

Off: System is on, when it＇s time to shut down, system will be automatically turned off.

TIME: Current time
When Timer is set to NO , auto-timer is off.

1.Press ENTER / MENU to enter submenu, then press ENTER / MENU to enter OSD
ADJUST (or press )

2.Press 、　 to highlight your choice.

3.Then press ENTER to highlight, press 、　 to change settings. Or Press ENTER for

options

Note: To ease the operation, the second function of multifunction buttons will be used

(up, down, left, right at menu setting)， representing by ：　、　、　、

Operation under highlighting the variable

BRIGHTNESS reduce/increase the variable
CONTRAST reduce/increase the variable

SHARPNESS reduce/increase the variable
SATURATION reduce/increase the variable

HUE reduce/increase the variable
COLOR
TEMPERATURER reduce/increase the variable
RESET reduce/increase the variable
RETURN reduce/increase the variable

COLOUR TEMPERATURE

RESET

RETURN

6.1.1 VIDEO ADJUST

- 11 -

VOLUME
BASS

1.Press MENU to enter submenu, then press ENTER to open AUDIO menu .

2.Press 、 to highlight your choice.

3.Press ENTER to open and press 、　 to change the settings. Or press ENTER for

options

RETURN

6.1.4 AUDIO

(Or press )

TREBLE
BALANCE

VIDEO
TV

1. Press MENU to enter submenu, then press ENTER to enter INPUT SELECT .

2. Highlight your selection, press ENTER to confirm.

MEDIA PLAYER
RETURN

For VIDEO input signal
For TV signal

For Media Player
Return to menu

ENGLISH
CHINESE
RETURN

6.1.5 LANGUAGE SELECT (LANGUAGE SETTING)

1.Press MENU to enter submenu, then press ENTER to open LANGUAGE SELECT
menu

2.Select a language, then press ENTER to confirm.

ENGLISH

CHINESE

VIDEO

TV

MEDIA PLAYER

RETURN

6.1.3 INPUT SELECT

- 12 -

VIDEO ADJUST
OSD ADJUST
INPUT SELECT
TV FUNCTION
TV MODE
AUDIO
LANGUAGE SELECT
EXIT

Menu:

The Operation for VIDEO ADJUST、OSD ADJUST、INPUT SELECT、AUDIO、
LANGUAGE SELECT、EXIT are the same for VIDEO、MEDIA PLAYER mode, here

are the details of TV function and TV mode setting.

AUTO SCAN

MANU SCAN

FINE TUNE

PRESET PROGRAMS

SKIP PROGRAMS

SELECT PROGRAMS

6.2.1 TV FUNCTION

6.2 TV MODE SETTINGS

Zoom mode
return

6.1.6 EXIT

press ENTER/MENU to quit OSD adjust.

- 13 -

6.2.2 TV MODE

NTSC CABLE

NTSC AIR

PAL B/G

PAL I

PAL D/K

RETURN

TV MODE

NTSC

PAL B/G

PAL I

PAL D/K

US, Japan, South Korea

Germany, Italy, Spain, Saudi Arabia and
other countries adopting PAL B/G

Hong Kong, UK.

CHINA

1.Press ENTER / MENU to enter into the function present program， Through

to adjust

2.Press ENTER / MENU again and it will be set up.

TV MODE

MANU SCAN

AUTO SCAN

FINE TUNE

PRESET PROGRAMS

SKIP PROGRAMS

SELECT PROGRAMS

Auto search all channels

Manual search channels

Covering manually full channel width, to the highest level of
performance.

Able to change channels' sequence.

This function for skip a channel, on remote control to select
a skip channel.

This function for select channel on the machine buttons, on
machine to select channels.

1.Press remote control direction key to select, and press ENTER / MENU to confirm

2.Select PRESET PROGRAMS setup selection, press to adjust the aimed channel
in the mid-bottom of OSD menu, press ENTER / MENU to realize preset function

TV Function Menu

ZOOM MODE

Display Zoom function．　press“ YES”, then can switch between

16:9 and 4:3.

- 14 -

7.3 DISPLAY CHANNEL

While TV is in playing mode，press DISPLAY to show channel number on the top right

corner screen.

7.4 CHANELL RECALL

While TV is in playing mode, press ENTER to go back previous channel.

８

AV INTERFACE User Instruction

This product has AV Device. AV Device can directly connect with DVD, VCD player

User Instruction below：

AV Input &VIDEO Output could be set under INPUT SELECT at OSD MENU
AV Input: VIDEO Input (Connect DVD/VCD VIDEO Output), AUDIO Input (Connect DVD
/VCD Audio Output) , needs to choose VIDEO AT INPUT SELECT to realize AV Output.

Instruction：

First Thing AV Signal Cable connected follow by color:

1.Take DVD, VCD's VIDEO（ Yellow）Connect to Album TV's VIDEO AV.

2.Take DVD, VCD's AUDIO（Red、White）Connect to Album TV's AUDIO AV.

Then switch Digital frame's mode to VIDEO:

1. Press MENU into OSD system menu.

2. Press switch to INPUT SELECT screen.

3. Select VIDEO input mode, ENTER to confirm VIDEO input mode.
Finished Instruction above will be able to watching DVD,VCD.

AV Output Status Description: This system will be in the status of AV output status when
play the TV and memory card reader, so only when connect the AV cable well, the terminal
of outside player can display synchronously with this system.

７

TV Operation

7.1 AUTO CHANNEL SEARCH

First time use or TV moved to new area, needs to process auto channel search.

1.In TV Playing mode, press MENU to enter submenu.(Please compare system setting
part in the front page.)

2.Press on the remote control to TV Menu, then press ENTER to enter setting.

3.Press on the remote control to Auto Channel Scan, press ENTER to enter Auto
Channel Scan . After auto scan finished, there will be auto play first channel, and
channels can be watch normally.

4.To stop Auto Scan, press ENTER Key to quit.

7.2 CHANNEL SELECTION

To select channels, press or enter number of a channel on the remote control, Also
Channel Selection can be found in the submenu for select channels.

- 15 -

９

Specifications

Panel: 7 Active Matrix Color TFT LCD
Active Area: 152.4 mm(Horizontal)*91.44(Vertical)mm

Resolution: 800(W)＊ 480(H)

Pixel pitch: 0.1905mm(W)*0.1905mm(H)
Lamp Lifetime: 20,000Hours
Brightness: 400cd/m
Contract Ratio: 200 : 1
View Angle: TOP45 /BOTTOM60 /LEFT65 /RIGHT65
Input Power:
Power Consumption:
Supported Multimedia File: MPEG 1, MPEG 2

MP3, WMA
JPEG
Supported Memory card: CF, SM, SD, MMC, MS, MS PRO, IBM MICRODRIVE

DC 12V, 1.5A

18W

2

- 16 -

The following information with regard to safety are recommended to be included as far as
applicable:

-minimum distances around the apparatus for sufficient ventilation;

-the ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.;

-No naked flame sources, such as lighted candles, should be placed on the apparatus;

The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.

Warnings:

CAUTION
Danger of explosion if battery is incorrec tly replaced.
Replaced only with the same or equivalent type.

Shanghai Visart Technologies Co., Ltd.

Room 906 Hongcao Building,　421 Hongcao Road

Shanghai, China, P. R.
200233

Tel: [phone]
Fax: [phone]

VISART USA Corporation

1211 John Reed Court,
City of Industry, CA 91745

Tel: [phone]
Fax:[phone]

Toll free: 1-866-4-VISART　

Http： //www.visart.com