Visa Lighting SYMMETRY Series, SYMMETRY CM1988-T, SYMMETRY CM1986-W, SYMMETRY CM1988-W Installation Instructions Manual
INSTALLATION INSTRUCTIONS
Model:
CM1986-W, CM1988-W,-T
Fixture Family:
Document Description: Installation Instructions for
2X2 SYMMETRY BEHAVIORAL HEALTH
SYMMETRY Series Luminaires
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting 2016
Drawing:
762330XX
SHIPPED SEPARATELY
2x2 SYMMETRY BEHAVIORAL HEALTH
PAGE 2: FIXTURE OVERVIEW
PAGE 3: RECESSED DIMENSIONS
PAGE 4: INSTALL FIXTURE
Rev:
A
Sheet:
1 of 5
Eng:
DMM
Date Drawn:
8/25/19
PAGE 5: INSTALL FIXTURE (cont.)
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
!
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
INSTALLATION INSTRUCTIONS
Model:
CM1986-W, CM1988-W,-T
Fixture Family:
Document Description: Installation Instructions for
2X2 SYMMETRY BEHAVIORAL HEALTH
SYMMETRY Series Luminaires
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
FIXTURE OVERVIEW:
19-3/4"
23-1/2"
SHEET METAL SCREWS
TO SECURE HOUSING TO STRUCTURE
(by others)
(4) FIXTURE SUPPORT CABLES
(by others)
23-1/2"
23-1/2"
10"
FIXTURE TOP:
5"
HOUSING
DEPTH
6-5/8"
TOTAL
RECESSED
DEPTH
Drawing:
762330XX
5-1/2"
Rev:
A
Sheet:
2 of 5
10"
HOUSING
ASSEMBLY
FIXTURE
SUPPORT FRAME
(by others)
SHEETROCK
LENS ANCHOR PLATE
SHEET METAL SCREWS (12)
(provided)
LENS FRAME ASSEMBLY
#8-32 LENS MOUNTING
PIN-IN TORX SCREWS (12)
(provided)
Eng:
DMM
FIXTURE SIDE:
FIXTURE
WIRING
ENTRANCE
Date Drawn:
8/25/19
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
!
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Loading...