Visa Lighting CB5513, CB5524, OW5513, OW5515, CB5515 Installation Instructions Manual
...
INSTALLATION INSTRUCTIONS
Model:
CB5513 / 5515 / 5517 / 5524, OW5513 / 5515 / 5517 / 5524
Fixture Family:
Document Description: Installation Instructions for
SHINE (LED)
SHINE Series Luminaires
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
Drawing:
762250XX
Rev:
B
SHINE
CB / OW5513
CB / OW 5515
CB / OW 5517
CB / OW 5524
Sheet:
1 of 5
Eng:
SLN
Date Drawn:
10/14/15
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
!
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
INSTALLATION INSTRUCTIONS
Model:
CB5513, CB5515, CB5517 & CB5524
Fixture Family:
Document Description: Installation Instructions for
DAMP LOCATION INSTALLATION
SHINE (LED)
LAMP PLATE
MOUNTING
SCREWS (2)
INNER LED
LENS
MAIN
LENS
SHINE Series Luminaires
HOUSING
MOUNTING
SURFACE
JUNCTION
BOX
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
Drawing:
762250XX
Rev:
B
LED LAMP
PLATE
MOUNTING SCREWS
(SUPPLIED BY OTHERS)
1 Slide off main lens by pulling forward.
2. Remove inner LED lens by gently squeezing top and bottom and pulling away from LED lamp plate.
3. Remove LED lamp plate by unscrewing (2) lamp plate mounting screws.
4. Feed electrical wires through wire access hole in housing.
5. WHILE CHECKING FOR LEVEL, secure housing to wall with screws (supplied by others).
Sheet:
2 of 5
Eng:
SLN
Date Drawn:
10/14/15
6.
Make electrical connections per code.
7. Resecure LED lamp plate with provided lamp plate mounting screws (2).
8. Resecure inner LED lens and gently reinstall main lens.
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
!
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Loading...