Visa Lighting ASTA Series, ASTA CB6504, ASTA CB6505, ASTA CB6506, ASTA CB6507 Installation Instructions Manual
...
INSTALLATION INSTRUCTIONS
Model:
CB6504, CB6505, CB6506, CB6507, CB6508, CB6509
Fixture Family:
Document Description: Installation Instructions for ASTA
ASTA
ASTA Series Luminaires
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
Drawing:
760456XX
Rev:
B
ASTA WALL MOUNT
FLR LED
CB6504 CB6505
CB6506 CB6507
CB6508 CB6509
PAGE 2: FLR
PAGE 3: LED
Sheet:
1 of 3
Eng:
GJW
Date Drawn:
11/5/2003
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
!
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
INSTALLATION INSTRUCTIONS
Model:
CB6504, CB6505, CB6506, CB6507, CB6508, CB6509
Fixture Family:
Document Description: Installation Instructions for ASTA
ASTA
ASTA Series Luminaires
FLR
MOUNTING SCREW (2)
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
MOUNTING BRACKET
Drawing:
760456XX
FLAT HEAD
SCREW (2)
ACRYLIC LENS
Mounting instructions:
END BRACKET
AUXILIARY
HOLE (2)
Rev:
B
Sheet:
2 of 3
Eng:
GJW
END KNOB
Fasten mounting bracket over junction box (by others) to the wall with mounting
1.
screws supplied or ones suitiable for wall construction, through mounting holes.
Make electrical connections per local and national codes.
2.
Put fixture over mounting bracket and fasten with (2) button head screws provided.
3.
Note: Auxiliary mounting holes are to be used for 3' and 4' length fixtures.
Lamp installation instructions:
Unscrew end knob from one end.
1.
Slide off end bracket.
2.
Squeeze acrylic lens and slide out.
3.
Install lamp.
4.
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
!
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Date Drawn:
11/5/2003
Loading...