ViSAGE VIS054 Operation Manual

1 of 6 pages

VIS054 Operation Manual

The VIS054 is operated by 4 button,it is MODE, SETUP, UP, DOWN for operation,which is also can be

controlled by IR remote controller.It has the saving the program function means that the fixture will keep the same

program as the last time when you re-open the light.The unit has the temperature protection function.It will turn

off the light once its inner temperture is over 85C,but wouldn’t affect the connected lighting work.

Specification

·

Input power:AC 100V-240V 60Hz/50Hz

·

Power consumption: 120W

·

LEDs: 12pcs 8W(4 in one)

·

Beam angle: 40 degree

·

3PIN female XLR socket and 3PIN male XLR socket

·

4 button Digital LED display for easy operation

·

Each LED can be controlled individually

·

Selectable manual dimmer,built-in program,Auto run,DMX mode,slave mode,sound-activated.

·

Housing:aluminum

·

Weight:6.5kgs

·

Size:1100x180x165mm

·

IR remote available

·

AC power cord on rear to daisy chain power

Operation mode

·

manual dimmer color mode

·

built-in program select mode

·

auto run mode

·

sound-active mode

·

slave mode

·

DMX mode(3 modes)

The above six operation modes are selected by MODE button.When you insert the power plug, the led bar is

on,press “MODE” and “SET UP” button at the same time, it will initialize the product at the auto run mode.To

make the display stay on all of the time press the MODE and UP buttons at the same time.To make the display

turn off after 20 seconds, press the MODE and DOWN buttons at the same time.

OPERATION

Press “MODE”button to activate the main menu,press"SET UP"button to activate the submenu,press “UP”

and ”DOWN” button adjust the related value.

A.Dimmer color mode:

Press"MODE ” button to active manual dimmer running mode, “CoLr”is display, press “SETUP” button to select

four color, red "r.XXX”, green”G.XXX” , blue”b.XXX” and white"h.XXX"is display. Press “UP” and “DOWN”

button to adjust the brigtness value 0-255 of every color, total 256 value, the bigger value the brighter.

B. Built-in program select mode

Press “MODE” button to select this mode,the LED display show ”Pr.XX”. Under this mode, press “SETUP”

button to select built-in program, jumping speed and fade speed.When “Pr.XX” is display,press “UP” or “DOWN”

button to select built-in program 1-12, as follow:1.static color selection, 2.fifteen color slow dream, 3.fifteen color

fade change, 4.fifteen color jumping, 5.fifteen color signal direction flow,6.fifteen color double direction

flow,7.fifteen color signal direction flow+ dream 1,8. fifteen color signal direction flow+ dream 2, 9. signal

2 of 6 pages

direction section flow 1, 10. signal direction section flow 2, 11.double direction section flow,12.fifteen color

mixing.When “SP.XX” is display,press”UP” or “DOWN” to select the jump speed 1-99 level.1 is slowest, 99 is

fastest. When “Fd.XX” display, press “UP” or “DOWN” button to select the fade speed 0-99, 0 is turn off fade,1

is the fastest, 99 is the slowest.

Notice: “ Pr.01” is static color selection program. There are 15 colors to choose from. Press SET UP button to

enter the static color submenu,and then pressing “UP” and “DOWN” buttons to scroll through the static colors.

C. auto run mode

Press “MODE” button, ”AUTO.” is displayed, the built-in programs run one after another in continuous loop.You

can adjust the amount of program cycles by pressing SET UP button.The display will show “n.XXX”, “XXX”

representing the current number shown. Press the “+” and “-” buttons to increase or decrease the amount 1-100 of

program cycles.

D. sound-active mode

Press “MODE” button to select the soud-active mode, “SU.XX” is display.Press “UP” or “DOWN” button to

adjust the sound sensitive 0-31.total 32 level. “0” is turn off sound-active function, “1” is the lowest sensitive,

“31” is the topest.

E. slave mode

Press “MODE” button to select the slave mode, “SLAu.” Is display. The “SET UP” “UP” and “DOWN” button is

not available.

F. DMX mode(3 mode)

Press “MODE” button to select DMX mode,“d.XXX” is display. Press “SETUP” button to set DMX mode or

DMX address. When “d-P.X” is display, press “UP” or “DOWN” button to select DMX mode 1-3. When

“d.XXX” is display, press “UP” or “DOWN” button to select the DMX address 1-512. Without connecting the

DMX controller, the display will flickering, all the LED will go out.

DMX value and function as follow:

 d-P.1: 7 channels mode

CH1 CH2 CH3 CH4 CH5 CH6 CH7

MODE

DMX

VALUE

FUNCTION

1 0-18 No function

Red

(Pixels 1-12)

Green

(Pixels

1-12)

Blue

(Pixels

1-12)

White

(Pixels

1-12)

2 19-37

Fifteen color slow

dream

3 38-56

Fifteen color fade

change

4 57-75

Fifteen color

jumping

5 76-94

Fifteen color

signal

direction flow

6 95-113

Fifteen color

double direction

flow

7 114-132

Fifteen color

signal direction

flow+ dream 1

Dimming

Flash

1-255

slowest to

fastest

Speed

0-255

（

slow

→

quick）

No

function

No

function

No

function