Page 1
Frequently Asked Questions
• Nail Set/Center Punch
• Marker/Pen
• Safety Glasses
• Electrical Tape
• Phillips Screwdriver
• Hammer
• Wire Cutter
• Electric Drill
with 1/16" bit
INTERIOR PANEL
SPRING NUT
The small hole of
the spring nut is
on this side of panel
SPEAKER GRILL
SPEAKER
WIRE
Spring Nut
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
RS400
One Pair 4”
Three-Way Speakers
Dear Customer,
CONGRATULATIONS.
The RS400 4” 3-way speaker s, when used as described, will give you year s of dependable service in your car, truck, RV or mini-van. We have taken numerous measures in
quality control to en sure that your product a rrives in top condition, a nd will perform to
your satisfaction. In th e rare event that your RS400 4” 3-way spea kers contain a damaged
or missing item, doe s not perform as specifi ed, re quir es wa rran ty se rvic e, or you ha ve an
installation problem, DO NOT RETUR N THIS P RODUCT TO THE ST ORE. PL EASE C ALL
OUR TOLL FREE NUMBER FROM THE U.S. A. AND CANADA 1-800- 445-1797 and ask
to speak with a member of ou r technical ser vice team, or submit your qu estions by EMail to customerser vice@vr-3.com.com and a member of our te chnical service team will
respond by e-mail to you r questions. Our in- house technical se rvice team will expe dite
delivery of your par t, advise you on installation, or help t roubleshoot a problem with you.
If your product needs wa rranty servi ce, our technical ser vice team repres entative will
help you obtain the fastes t remedy possible under the warra nty.
Before You Install
We understand that au tomotive audio equipment i nstallations can be troublesome at
times, even to the most exper ienced of installa tion technicians. If you a re not confi -
dent working with ele ctrical wiring, re moving and reinstall ing interior panels , carpeting, d ashboa rds or o ther co mponen ts of you r vehicl e, plea se call o ur TOLL-FR EE help
line 1-800-445-1797 and our in-house technical service team will answer your installation questions.
Before installing the se speakers, chec k the vehicle’s manual for locatio ns of
impor
tant vehicle compon ents such as air bags , CO2 systems, fuel systems ,
& electrical system s installed in the vehicle. Accide ntal deployment of air bags
may result in serious i njury.
Parts & Specifi cations
• 4” Polypropylene Coated Pape r Cones
• 6 Oz. Magnet
• Foam Rubber Surroun ds
• 100 Watts Maximum Peak Power per Pa ir
• 20 Watts RMS Power per Pair
• 50 - 20,000 Hz Frequency Re sponse
• Bridgeless 1” Midrang e & .5” Dome speakers
• Dome Tweeters
• Quick Release Terminals
Tools Needed To Install
Installation
1.93" or 4.9 cm"
Speaker Depth
If you are installing the RS 400 speakers to upgrade/repl ace your existing speakers, remove the existing speakers f rom your vehicle, disconnect the spe aker wires and mark
the polarity. Place the RS 400 speakers in the locatio n you selected in your vehicle and
connect the existin g speaker wires. Make sure to keep the pola rity of the speakers and
wires correct ( positive wire to positive spe aker terminal and neg ative or ground wire
to negative ter minal)
Before you ins tall your sp eakers you mu st make sure yo u
have e
nough depth/space behin d the mounting surfac e.
You do not want the back of the speaker magnet to touch any pa rt
of your vehicle, or interfere with the operation or function of any
component in your vehic le. (ie. windows or trunk lid)
Location
You should only mount your speaker s in factory precu t holes. We
DO NOT recommend that you cu t holes for mounting the speakers. If
there are no factor y precut holes con sider having the speake rs professionally installed.
Mounting
1. Connect the speaker wires to
the speaker. Maintain polar ity by
connecting the pos itive wire to the
positive speaker termi nal, and the
negative wire to negative sp eaker
terminal.
2. Slip the supplied sprin g nuts into
place and align the hol es.
3. Screw the speaker into
place with screws (provid ed).
4. Firmly attach the sp eaker
grill cover.
What if ther e is no sound?
1. Your stereo may have a blown fuse. Replace fuse with th e same amperage an d
style.
2. Yo
u may have improper wiring. Re fer to the wiring guide that came with your ste reo/
amplifi er. Check all wires for a secure conn ection.
What if the so und volume is low?
Your stereo may not have enough power, you may have to install an am plifi er to
d
rive the speakers
Why do I have a whining noise coming from the speakers?
You may have poor fi lter
ing of your alternator. If that is the case th en you
may need to add an alterna tor fi lter to the power lead.
Why do I have odd sou nding noises coming fro m the speakers?
You may have corroded battery ter minals and/or a weak batte ry. If the terminals on
the bat
tery are corrod ed clean them, then check the sound. If th e sound system is still
making noises che ck battery strength. If it is low, recharge or r eplace the battery.
Why does the sp eaker have sound coming from o ne channel only?
First make sure the bala nce control is set correctly. If the balance is se t correctly
your st
ereo may be defective or the s peaker may be defective. To troubleshoot
this problem you MUST cha nge both positive and negative leads of each c hannel with
the positive and negati ve leads of the opposite cha nnel, if the same speake r has no
sound then the speake r is no good, if the opposi te speaker has no sound the n your
stereo may be defective.
Maintain proper p olarity by attaching the
Positive Wire(+) to Positive Terminal(+)
and the Negative Wire(-) to Ne gative
Terminal(-)
Limited Warranty
VIRTUAL REALITY SOUND LABS® products are designed and manufactured to provide a high level of trouble-free performance.
VIRTUAL REALITY SOUND LABS® warrants, to the original purchaser, that its products are free from defects in material and
workmanship for 30 days from the date of original purchase. As part of our commitment to product excellence, VIRTUAL REALITY
SOUND LABS®and/or its affi liates routinely improve the designs, materials or production methods of its existing products. Because
it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice.
CONDITIONS OF WARRANTY:
If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALITY SOUND LABS® will repair such
defect, or replace the product, without charge for parts or labor subject to the following conditions:
1. All repairs must be performed by VIRTUAL REALITY SOUND LABS
®
and/or its affi liates in Eatontown, New Jersey.
2. The equipment must not have been altered or been damaged through negligence, accident, or improper operation.
3. The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.
4. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5.
Repair or replacement parts supplied by VIRTUAL REALITY SOUND LABS® under this warranty are protected only for the unexpired por-
tion of the original warranty.
6. In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of antenna
problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, accessories or car electrical
systems.
7. VIRTUAL REALITY SOUND LABS® will not be responsible for any charge incurred for installation.
OWNER’S RESPONSIBILITIES:
VIRTUAL REALITY SOUND LABS will make every effort to provide warranty service within a reasonable period of time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1-800-445-1797, 8:30am - 4:30pm EST.
In order to provide you with the proper warranty service, we request that you adhere to the following procedure:
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.
2. If it is necessary to return your product for service, please return it securely packed, preferably in the original shipping carton,
and freight and insurance prepaid to the following address: VIRTUAL REALITY SOUND LABS, Service Department, 41 James Way,
Eatontown, New Jersey 07724.
3. Please include a detailed explanation of the problem you are having.
4. If your product is found by VIRTUAL REALITY SOUND LABS
®
to have a defect in material or workmanship, within the warranty
period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw VIRTUAL REALITY SOUND
LABS® liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the purchaser.
VIRTUAL REALITY SOUND LABS
®
makes no other warranty of any kind, expressed or implied; and all implied warranties, are
hereby disclaimed by VIRTUAL REALITY SOUND LABS
®
and excluded from this warranty, VIRTUAL REALITY SOUND LABS® and/
or its affi liates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential,
arising out of the use or intended use of the product.
©2008 Intell ectual Solutio ns Inc., All rights r eserved. All de signs, logos a nd images are the exc lusive proper ty of Intellectu al Solutions
Inc. and/or its a ffi liates. U.S. and Foreign Patents Pending. 072308 Printed in China 00000
2 Speakers
2 Grills
8 Screws
8 Spring Nuts
Speaker wires with fem ale disconnects o n
one end are recomm ended. When conne cting the speaker wires to you r speakers in a
new installation, you sh ould follow the wiring
instructions from your audio system’s manufacturer.
Attach the quick dis connect conne ctors to
the speaker terminal s as shown. Maintain
proper polarit y by attaching the Positi ve
Wire(+) to Positive Terminal(+) and the Nega-
tive Wi
re(-) to Negative Terminal(-).
For most systems the posi tive wire attaches
to the positive speaker ter minal and the negative wire attaches to the n egative terminal.
Loading...