Vipro AVM100 User Manual
AVM100 Around View Monitoring System
User’s Manual v1.2
This manual was complete and correct at the time of printing. The ongoing development of the products
may mean that the content of the user guide can change without notice.
The manual will be kept updating periodically, and software referred as well.
ViPRO SECURITY
www.vipro.com.tw
Content
1. Safety Protection..........................................................................................1
2. Product description ......................................................................................1
3. Product composition ....................................................................................1
3.1 Panel Interface ....................................................................................2
3.2 Remote control .................................................................................... 3
4. Display Interface ..........................................................................................4
5 System function ............................................................................................4
5.1 General Function .................................................................................4
5.2 Users Function ....................................................................................5
5.3 Product Specifications .........................................................................6
6. Installation and Debug Instructions .............................................................. 7
6.1 Installation Instructions ........................................................................ 7
6.1.1 Wiring diagram ........................................................................... 7
6.1.2 Determination of the host position ..............................................7
6.1.3 Camera wiring model .................................................................8
6.2 Debug Instructions............................................................................... 9
6.2.1 Debugging preparation ............................................................... 9
6.2.2 Debugging tool arrangement .................................................... 10
6.2.3 Spreading.................................................................................. 11
6.2.4 Debugging ................................................................................ 12
6.25 Camera parameters Setup ........................................................15
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
- 1 -
Welcome to use Around View Monitoring System, hereafter referred as AVM. The operating
instruction manual explains the required items for proper use of AVM, please read it carefully. Note that
the sketches shown in the instruction are illustrative only and please refer to full-scale production for
actual use
1. Safety Protection
In order to insure the safety use of the product, please be careful to read the following required
items:
1. This product is driving auxiliary equipment only and therefore can not replace the actual
observation of eyes. It may result in serious traffic accident if over depending on the system.
2. The camera viewing angle is relatively large, therefore, this product cannot fully display actual
conditions, please be careful to use it before you are familiar with.
3.
Don’t operate this system when driving at high speed in order to avoid accidents due to distraction.
4. Don’t place the product in humid conditions in order to avoid short circuit raised by electric shock
and fire.
5. Please apply the system under operating voltage.
6.
The output voltage of the host is 3.3V, only serve for the camera. Please don’t load any
undesignated or allowed equipments.
2. Product description
AVM collects images around automobiles, after series of intelligent algorithm processing, the
panorama overhead view of a vehicle is shown on the screen, which displays relevant locations and
around conditions directly. The system, to a great extend, expands drivers’ environment perceptions, so
they can deal with parking and narrow road entrances, and barriers easily with decreased traffic
accidents such as scraping cars.
3. Product composition
AVM contains an image processing unit and four ultra-wide cameras, as shown in figure 3.1. Usually,
the left and right camera are installed in left and right rearview mirror, the front and back camera are
installed above the front and back bumpers. According to various types of vehicles, the appearance and
installation spot are different as well.
Fig 3.1 AVM composition
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
- 2 -
3.1 Panel Interface
Fig 3.2 Panel Interface
1、micro SD
2、Base Wire interface
3、Power Line Interface
4、power light，keep on when control box is working.
5、LED Light for work state, blink when control box is working.
6、Dail switch
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
- 3 -
3.2 Remote control
Fig 3.3 Remote Contrl
: To open or close display when no backward signals are detected.
~ ：Used in debug function
Not used
Exit menu or return to previous menu
Enter debug menu
Switch display channel of the
single-camera display area.
Enter User menu or confirm the setting of user menu
Switch between menu items
Change menu item value
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
- 4 -
4. Display Interface
AVM video output can be connected to independent LCD, and displayed through original installed
Car DVD as well.
AVM view illustrations: when the system starts, images can be shown in figure 4.1. The panorama
view mode is made of overhead display and single-camera display area. The former picture shows the
front, back, left and right side of the vehicle body, scopes of which is around 2、4、2.5、2.5 meters.
Fig 4.1 Panorama effects
Within single-camera display area, the up-right sign indicates which camera was used to show the
image as shown in figure 4.2.
Fig 4.2 Front rear sign
Note: Display of the frame is subject to the actual product; our company retains the right to
interpret it.
The displayed effects may be influenced by the following situations:
1) Camera is exposure to the sun directly
2) Rainstorm or rainy days
3) Camera interface freezes or spots with clay、dust、or snowflakes
4) Under a weak light of the environment
5 System function
5.1 General Function
1. When the car starts, the system will stay in the standby mode and it will open automatically if you
put the car in reverse gear or press power button of remote control.
2. After turning on the system, if the car is not stay in reverse gear or users don’t operate or press
power button of remote control. within 30 seconds, the system will enter the standby mode.
3.
When the car put in reverse mode the single camera image display area will exchange to rear
view images, otherwise, it will exchange to the front view image automatically.
4、Press OPTIONS key of remote control., the single camera image display area will show either
front-back or all-around images
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
Loading...