VIPowER VPA-5010KP2F, VPM-5010KP2F, VPA-5010LS2F, VPM-5010LS2F, VPP-2010KP2F Installation Manual

Step.5

Secure the drive and inner tray
with four retaining screws.

Step.6

Replace the inner tray top cover.

VP-9101P

External
SATA
Cable

Optional Accessory

Unlike all the other MobileRACK in the market,
ViPowER VPA-5010 series is the only SATA
MobileRACK with worldwide patented Direct
Link technology. Allowing direct HDD connection
without any intermediate cable and/or connector.

Patented
Direct Link

As soon as you purchase VP-9101P, Your SATA
Mobile RACK will become ExternalEnclosure.

For Internal

For External

AD/DC input

Connect to PC

3.5" HDD

not included

ViPowER SATA Direct-Link
MobileRACK Installation Guide

Step.1

Pull in the SATA MobileRACK.

Step.2

Secure the SATA MobileRACK
with four retaining screws.

Step.3

Remove the inner tray.

Step.4

Slide the top cover off.

Step.7

Insert the inner tray.

Step.8

Slide the Latch-Switch Left
to Lock.

RIGHT

Unlock / OFF
Position

LEFT

Lock / ON
Position

The Key-Lock and latch-switch support hot­swapping. Use the Key-Lock or latch-switch to
MobileRACK ON after inserting the inner tray,
and OFF before removing it.

Mode No.:

VPA-5010LS2F
VPA-5010KP2F
VPM-5010LS2F
VPM-5010KP2F
VPP-2010LS2F
VPP-2010KP2F

Key-Lock

Lock / ON
Position

Key-Lock

Unlock / OFF
Position

Key-Lock type

Latch-Switch type