Viper V370 User Manual

Gaming Headset

V370

User Manual

Introduction

Thank you for purchasing the Viper V370 gaming headset. This headset comes equipped with a 7.1 virtual
surround sound engine that brings true-to-life 360° audio to immerse you deep into in the game. Addition­ally, each ear cup comes equipped with its own separate 30mm bass driver with UBR (Ultra Bass Re­sponse) technology that provides incredible low frequencies for a thunderous bass experience.

An omnidirectional microphone that folds away into the left ear cup when not in use offers exceptional sig­nal-to-noise ratio to transmit a loud and crystal clear signal that is unmatched by traditional microphones.

All of the controls for the headset are located directly on the left ear cup for quick access and to eliminate
the need for a bulky and heavy control unit on the headset cord.

Finally two sets of interchangeable ear cups have been provided to use, based on your personal prefer­ence. The cloth mesh ear cups and the soft leather ear cups are stylish, functional, and comfortable for
hours of extended game play. A special tool has been provided to change out the ear cups.

Features / Technical Specications:

• 7.1 Virtual surround sound

• Built-in foldable microphone

• Ultra Bass Response (UBR) system

• USB interface

• Convenient on-ear sound controls

• RGB LED illumination

Speaker:

• Frequency response: 20Hz - 20KHz

• Impedance: 32 Ω at 1kHz

• Sensitivity: 110dB ± 3dB at 1 kHz max

• Input power: 10mW

• Main drivers: 40mm Neodymium magnet

• Sub-drivers: 30mm

• Cable length: 2.2 meters / 7 feet

• Net weight: 385 g

Microphone:

• Frequency response: 100Hz - 10KHz

• Signal-to-noise ratio: 60dB

• Sensitivity: -46dB ± 3dB

• Pick-up pattern: omnidirectional

Package Contents:

• Viper V370 gaming headset

• Carrying bag

• Extra ear pads

• Ear pad changing tool

• Quick Start Guide

• Viper Sticker

1. Ultra Bass Response (UBR) switch

2. Volume wheel

3. Foldable Microphone

1

2

3

1. Hardware Installation

Connect the headset to computers USB port.
Wait 5~10 seconds for the headset to be recognized by the computer.

2. Software Installation

Please download the headset software from the product page at http://www.patriotmemory.com to
adjust the headset, surround sound, sound effects, proles and more.

Software Installation Instructions

Once downloaded, double click on the software to start the installation. Follow the onscreen
instructions to nish the process.

Launch the Viper Audio Center

Double click the icon system tray to launch the headset software.

Right-click or double click on the Speaker or Microphone icon to access the sub-menus and

settings.

Speaker Settings

Volume Controls

Adjust master volume, front volume and the sensitivity for left and right channels.