Viper V360 User Manual
Gaming Headset
V360
User Manual
Introduction
Thank you for purchasing the Viper V360 gaming headset. This headset comes equipped with a 7.1 virtual
surround sound engine that brings true-to-life 360° audio to immerse you deep into in the game.
Additionally, each earcup comes equipped with it’s own separate 20mm bass driver with UBR (Ultra Bass
Response) technology that provides incredible low frequencies for a thunderous bass experience.
An omnidirectional microphone that folds away into the left earcup when not in use offers exceptional
signal-to-noise ratio to transmit a loud and crystal clear signal that is unmatched by traditional
microphones.
All of the controls for the headset are located directly on the left earcup for quick access and to eliminate
the need for a bulky and heavy control unit on the headset cord.
Finally the earcups are made from a high-quality fabric mesh that repels sweat and are comfortable to
wear for long periods of time.
Features / Technical Specications:
• 7.1 Virtual surround sound
• Built-in foldable microphone
• Ultra Bass Response (UBR) system
• USB interface
• Convenient on-ear sound controls
• LED illumination
Speaker:
• Frequency response: 20Hz - 20KHz
• Impedance: 32 Ω at 1kHz
• Sensitivity: 97dB ± 3dB
• Input power: 100mW
• Main drivers: 40mm Neodymium magnet
• Sub-drivers: 20mm
• Cable length: 2.2 meters / 7 feet
• Net weight: 385 g
Microphone:
• Frequency response: 100Hz - 10KHz
• Signal-to-noise ration: 93dB
• Sensitivity: 44dB ± 3dB
• Pick-up pattern: omnidirectional
Package Contents:
• Viper V360 gaming headset
• Carrying bag
• Quick Start Guide
• Viper Sticker
1. Ultra Bass Response (UBR) switch
2. Volume wheel
3. LED switch
4. Foldable Microphone
1
2
3
4
1. Hardware Installation
Connect the headset to computers USB port.
Wait 5~10 seconds for the headset to be recognized by the computer.
2. Software Installation
Please download the headset software from the product page at http://www.patriotmemory.com to
adjust the headset, surround sound, sound effects, proles and more.
Software Installation Instructions
Once downloaded, double click on the software to start the installation. Follow the onscreen
instructions to fnish the process.
Loading...