Viper SUP Owner's Manual

SUP
Owner’s Manual

www.viper-kayaks.com

Introduction

Introduction
SUP features
Fin installation instructions
Leash installation instructions
Paddle instructions

Index

CONTACTS
Service : [e-mail] / Sales : [e-mail]
Website : www.

viper-kayaks

.com

Ready to paddle & Equipment
Safety measures & Warning
Maintenance & Storage, Warranty registration
Warranty
Manufacturer’s declaration

Congratulations! You have just purchased a Viper SUP. The SUP busi­ness is growing and Viper is at the leading edge of this change.
Our boards are produced in a zero waste/zero landfill factory. We

are committed to protecting the environment.

We encourage you to read this Owner’s Manual carefully and
consider the recommended safety tips. Important techniques,
maintenance procedures, care, and storage are explained in

this manual to better assist you.

As a valued consumer, your comments or questions are always
appreciated.

2

page
page
page
page
page

2
3
4
5
6

page
page
page
page
page

7
8

9
10
11

SUP FEATURES

Read carefully, discover and learn about your SUP.

Leash anchor loop (instruction on p.5)
Bungee cords

Traction pad
Side carry handles
Center carry handle
Drain plug

1
2
3
4
5
6

Innovative seamless design.

3

Removable fin (instruction on p.4)

7

6

3

4

5

1

2

4

7

1- Clean the fin box to make sure it’s
free of debris. Insert the screw in the
metal plate.

2- Insert the metal plate in the fin box.

3- Using the screw, slide the metal plate
all the way back in the fin box.

4- Holding the fin at an angle, insert the
metal pin into the center opening.

5- Push the fin in the box and align tab
with metal plate.

6- Tighten the screw into the underlying
metal plate. Use a Phillips screwdriver
(not supplied).

FIN INSTALLATION INSTRUCTIONS

4