Viper SCRUBBER FANG 18C User Manual
USER MANUAL
SCRUBBER
Model: FANG 18C
VIPER CLEANING EQUIPMENT CO., LTD
Address: Liangbian village, Liaobu town, Dongguan city, Guangdong Province, CHINA
USER MANUAL ENGLISH
TABLE OF CONTENTS
INTRODUCTION ............................................................................................................................... ...............................2
MANUAL PURPOSE AND CONTENTS .......................................................................................................................................... 2
TARGET........................................................................................................................................................................................... 2
HOW TO KEEP THIS MANUAL.........................................
DECLARATION OF CONFORMITY ................................................................................................................................................ 2
IDENTIFICATION DATA................................................................................................................................................................... 2
OTHER REFERENCE MANUALS.......................................................................................................................
SPARE PARTS AND MAINTENANCE............................................................................................................................................. 2
CHANGES AND IMPROVEMENTS ................................................................................................................................................ 3
OPERATION CAPABILITIES........................................................................................................................................................... 3
CONVENTIONS .....................................................................
UNPACKING/DELIVERY ............................................................................................................................... ................. 3
SAFETY .......................................................................................................................................................................... 3
SYMBOLS .......................................................................................................................................................................................3
GENERAL INSTRUCTIONS............................................................................................................................................................ 4
.............................................................................................................. 2
......................... 2
...
................................................................................................... 3
......
MACHINE DESCRIPTION ............................................................................................................................... ............... 6
MACHINE STRUCTURE .................................................................................................................................................................6
ACCESSORIES/OPTIONS..............................................................................................................................................................7
TECHNICAL DATA...........................................................................................................................................................................7
WIRING DIAGRAM......................................................................................................................................................................... 8
USE…………………………….......................................................................................................................................... 9
SCRUBBER SETUP............................................................................. ...... ............................................ .....................................9
BASIC OPERATION ...
OPERATING HINTS ......................................................................................................................................................................10
DRAINING TANKS ........................................................................................................................................................................11
.................................................................................................................................................................. 10
MAINTENANCE.........................................................................................................................................................................….. 12
DAILY MAINTENANCE................................................................................................................................................................... 12
VACUUM MOTOR MAINTENANCE............................................................................................................................. ................. 12
SQUEEGEE BLADE CHECK AND REPLACEMENT...............................................................................................................
BRUSH/PAD CLEANING .................................................................................................................................................................13
SOLUTION/CLEAN WATER FILTER CLEANING........................................................................................................................... 13
........12
TROUBLESHOOTING......................................................................................................................................………………..…... 14
STORAGE......................................................................................................................................................................…….…........ 15
SCRAPPING ................................................................................................................................................................. 15
80188EU(1)2009-01 FANG 18C 1
ENGLISH USER MANUAL
INTRODUCTION
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the
machine properly, in a safe and autonomous way. It contains information about technical data, safety,
operation, storage, maintenance, spare parts and disposal. Before performing any procedure on the
machine, the operators and qualified technicians must read this Manual carefully. Contact Viper in
case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Viper will not be
answerable for damages coming from the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and
other substances that can cause damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certifies the machine conformity with the
law in force.
NOTE
The numbers in brackets refer to the components shown in Machine Description
chapter.
NOTE
Two copies of the original declaration of conformity are provided together with the
machine documentation. CE-declaration is print in Quick Start Guide
IDENTIFICATION DATA
The machine model and serial number are marked on the plate(16)
The machine model year is written in the declaration of conformity and it is also indicated by the first
two figures of the machine serial number.
This information is useful when requiring machine spare parts. Use the following table to write down
the machine identification data.
MACHINE model......................................................
MACHINE serial number..........................................
OTHER REFERENCE MANUALS
– Service Manual (that can be consulted at Viper Service Centers)
– Spare Parts List (see www.viperclearing.eu)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified
personnel or by Viper Service Centers. Only original spare parts and accessories must be used.
Contact Viper for service or to order spare parts and accessories, specifying the machine model and
serial number.
2 FANG 18C 80188EU(1)2009-01
USER MANUAL ENGLISH
CHANGES AND IMPROVEMENTS
Viper constantly improves its products and reserves the right to make changes and
improvements at its discretion without being obliged to apply such benefits to the machines that
were previously sold.
Any change and/or addition of accessories must be approved and performed by Viper.
OPERATION CAPABILITIES
These scrubber-dryers are used to clean (scrubbing and drying) smooth and solid floors, in civil or
industrial environment, under safe operation conditions by a qualified operator . The scrubberdryers cannot be used for fitted carpet and carpet cleaning.
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operator’s
position, that is to say in working position .
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during
transportation. In case of visible damages, keep the packing and have it checked by the carrier that
delivered it. Call the carrier immediately to fill in a damage claim. Check contents of package to
ensure that the following items are included:
1. Machine;
2. squeegee assembly;
3. brush (and pad driver);
4.Technical documents: Scrubber-dryer User Manual & Parts List
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information
carefully and take all necessary precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program
is effective without the total cooperation of the person responsible for the machine operation. Most
of the accidents that may occur in a factory, while working or moving around, are caused by failure
to comply with the simplest rules for exercising prudence. A careful and prudent operator is the
best guarantee against accidents and is essential for successful completion of any prevention
program.
SYMBOLS
DANGER!
It indicates a dangerous situation with risk of death for the operator.
It indicates a potential risk of injury for people or damage to objects
CAUTION!
NOTE
It indicates the necessity to refer to the User Manual before performing any procedure.
80188EU(1)2009-01 FANG 18C 3
WARNING!
It indicates a caution related to important or useful functions.
Pay careful attention to the paragraphs marked by this symbol.
ENGLISH USER MANUAL
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
DANGER!
– Always disconnect the power supply cable when the machine is not in use, before performing
maintenance procedures, before replacing the parts before opening any access panel.
– This machine must be used by properly trained and authorised personnel only. Children or disabled
people cannot use this machine.
– Do not wear jewels when working near electrical components.
– Do not work under the lifted machine without supporting it with safety stands.
– Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or
vapours.
WARNING!
– The machine power supply cable is grounded and the relevant plug is grounded too. In case of
machine malfunction or breakdown, grounding connection reduces the risk of electric shock.
– The power supply cable plug must be connected to an appropriate outlet, which is grounded
according to law in force.
– This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
– Children should be supervised to ensure that they do not play with the appliance.
– if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
– Improper connection can cause electric shock. Consult a qualified technician to make sure that the
outlet is properly grounded.
– Do not tamper with the power supply cable plug. If the power supply cable plug cannot be
connected to the outlet, have new grounded outlet installed by a qualified technician, according to
the law in force.
– Before connecting the power supply cable to the electrical mains, check that frequency and voltage,
shown on the machine serial number plate, match the electrical mains voltage.
– Regularly check the power supply cable for damages, cracks, cuts, etc. If the power supply cable is
damaged, replace it immediately.
– To avoid any risk, if the power supply cable is damaged, contact Viper Service Center or a qualified
technician.
– Do not pull or carry the machine by the power supply cable and never use the power supply cable as a
handle. Do not close a door on the power supply cable, or pull the power supply cable around sharp
edges or corners. Do not run the machine on the power supply cable.
– Keep the power supply cable away from heated surfaces.
– To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is
plugged in. Disconnect the machine from the electrical mains when not in use and before performing
maintenance procedures.
– To avoid electric shock, do not expose the machine to rain or other bad weather conditions.
Store the machine indoors, in a dry place.
– Do not allow to be used as a toy. Close attention is necessary when used near children.
– Use only as shown in this Manual. Use only Viper's recommended accessories.
– Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the
machine moving parts.
– Do not leave the machine unattended without being sure that it cannot move independently.
Do not use the machine on slopes with a gradient exceeding the specifications.
–
– Do not use the machine in particularly dusty areas.
4 FANG 18C 80188EU(1)2009-01
Loading...