Viper 9251VL, Responder LE, Responder LE 2-Way, Responder LE 1-Way Owner's Manual

Contents
Responder LE 2-Way & 1-Way............................................................................. 3
Advanced Remote Control Commands ................................................... 4
Fault Condition Alerts ........................................................................... 4
Basic Commands ................................................................................................. 5
Remote Start ........................................................................................ 5
Lock ................................................................................................... 5
Unlock ................................................................................................ 5
AUX/Trunk .......................................................................................... 5
Advanced Commands ......................................................................................... 6
Runtime Reset ...................................................................................... 6
Remote Control Configuration .............................................................................. 7
Remote Programming ........................................................................... 7
Remote Pairing ................................................................................... 7
Remote Features ................................................................................. 8
Keypad Lock ....................................................................................... 9
Remote Beeps* .................................................................................... 9
Remote Start Features ........................................................................................ 10
Disabling Remote Start ....................................................................... 10
Remote and System Operations .......................................................................... 11
Out of Range .................................................................................... 11
No Remote Output ............................................................................. 11
Battery Information ............................................................................................ 12
Low Battery ....................................................................................... 12
Low Battery Alerts .............................................................................. 12
Battery Life ........................................................................................ 13
Battery Replacement Responder LE 2-Way ............................................ 13
Battery Disposal ................................................................................ 14
Government Regulations .................................................................................... 15
Warning! Safety First ......................................................................................... 17
Limited Lifetime Consumer Warranty ................................................................... 18
9251-9153VL 2012-07-11
3
© 2012 Directed. All rights reserved.
Transmit
LED
Internal
Antenna
Ghost
LED’s*
AUX
1
2
3
4
5
Feature Description
Internal Antenna Used for transmitting and receiving* information
Transmit LED
Transmit LED flashes once when transmitting and receiving* information.
Ghost LEDs
(T
erm denotes that
these LEDs are only
visible when On.)
*
Each button has an associated LED next to it that are active during related operations. These LEDs are labeled respec­tively as: Lock LED, Unlock LED, Remote Start LED, Aux LED,
and
AUX
LED
1
Press for one second to lock.
2
Press for one second to unlock.
3
AUX
Press for one second to activate remote start.
4
AUX
Press and hold for 5 seconds to activate optional trunk release or other optional accessory.
5
AUX
Allows access to programming and modifies operation of the other buttons.
* Ghost LEDs and 2-way communications are only applicable to the
Responder LE 2-way remote control.
4
© 2012 Directed. All rights reserved.
Advanced Remote Control Commands
Refer to the Quick Reference Guide for more information on advanced remote start commands that are specific to each vehicle.
Fault Condition Alerts
If, when performing a command, a condition exists that does not al­low activation of a Remote Start feature*, the
AUX
LED and a fault tone
plays to alert of the fault condition**.
* Remote Start feature not available when the Remote Start status is
incorrect upon receiving the command. (Example: Runtime reset command received when remote start is off). Refer to the notes included in the command descriptions that ad­dress these faults or go to Remote Start Faults under the Remote Start Features section for more details.
** Confirmation
AUX
LED and tone are only applicable to the Re-
sponder LE 2-way remote control.
5
© 2012 Directed. All rights reserved.
Basic Commands
Remote Start
Press and release
AUX
AUX
Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the Remote start LED and On tones play
1
, or the engine and parking lights turn Off and the Remote start LED and Off tones play to confirm
1
. The runtime on the remote starter is predetermined based on vehicle application. The remote starter will shut down when the preset runtime times out or when any shutdown zone becomes active.
Note
Refer to the Quick Reference Guide for more information.
Lock
Press and release The doors lock (if connected) and parking lights flash once. The Lock LED and beeps play to confirm
1
.
Unlock
Press and release The doors unlock (if connected) and parking lights flash twice. The Unlock LED and beeps play to confirm
1
.
AUX/Trunk
Press and hold AUX The Trunk opens (if connected) when this button is pressed for 5 sec­onds. The Aux LED and tones play to confirm
1
.
1 Confirmation LEDs, beeps and tones are only applicable to the Responder LE 2-way remote control.
6
© 2012 Directed. All rights reserved.
Advanced Commands
Refer to the Quick Reference Guide for more information on advanced commands that are specific to each vehicle.
Runtime Reset
Press the
AUX
button 1 time and then
AUX
AUX
.
Re-starts the remote start runtime counter if remote start is active.
Loading...
+ 13 hidden pages