Viper home 503V Quick Reference Manual

503V Motion Sensor with Camera

Quick Reference Guide

Congratulations on the purchase of your Viper
Home Security Accessory. This guide walks you
through the process of adding this accessory to your
system and for mounting your accessory.

Note: Make sure you already have a Viper Home
Starter kit or Viper Home Hub installed. Please refer
to the quick reference guides found in these sys­tems, or visit: www.viper.com/home/support.

1. Log into your Viper Home account at:

home.viper.com

2. To pair the Camera to your system:

Click on the “Devices” tab
Click “Add New Device”
Click “Add Camera”

3. You are then prompted to insert the batteries

provided within three
minutes. First, remove
the mounting piece on
the back of the camera,
then remove the battery
cover and install the AA
batteries provided.

4. Once the batteries are

inserted the system
automatically connects

© 2013 Directed. All rights reserved.2

and confirms the camera is paired with your
system.

5. After the camera is paired, you can give it a

unique name (i.e. “Living Room”)
In this screen, if you click the “More” button,
you can set up additional options for the de­vice, such as “arm stay”, or “custom arm”, as
well as select what action the camera performs
when triggered.

6. Once completed, click the “Finish” button.

The camera is now ready for mounting.

Mounting instructions:

1. The spherical lens must be

pointing down and placed on a
wall where it will detect move­ment inside the room.

2. For best results, mount the

camera on a wall where it can
capture images as an intruder
enters the home.

3. The device should be placed

approximately 86” from the
floor and at least 4“ from the
ceiling.
Note: Do not place the device
in an area that receives direct
sunlight.

4. Once you have chosen the desired mounting

location, remove the backing from the tape
on the mounting piece and mount the device.

Ceiling

Floor

© 2013 Directed. All rights reserved. 3

Alternatively, you can also mount the device
with standard drywall screws by screwing the
mounting piece directly to the wall through the
circular dimples on the mounting piece.

Additional Information

Further information – For additional support,
including additional information videos and installa­tion tips, visit: www.viper.com/home/support

Warranty Information - Your system comes with
a one year warranty. For complete warranty details
visit: www.viper.com/home/support

This device is intended for indoor use only
and should not be mounted in any outside areas.
Mounting the device outside will void the warranty.

FCC/ID Notice: This device complies with Part 15
of FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.

CAUTION! Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate this device.

Directed is committed to delivering
world class quality products and services
that excite and delight our customers.

Vista, CA 92081

www.viper.com

IG503V 2013-09

© 2013 Directed. All rights reserved.