Viper GV25, GV35, GV702 User Manual
User Manual
Original instructions
GV25
GV35
GV702
Company information:
www.vipercleaning.eu
info-eu@vipercleaning.com
GV12066 (1) – 2012-04-10
GV12066 (1) – 2012-04-10 GV 25 / GV 35 / GV 702 3
USER MANUAL
ENGLISH
TABLE OF CONTENTS
INTRODUCTION .............................................................................................................................................................. 4
MANUAL PURPOSE AND CONTENTS .......................................................................................................................................... 4
TARGET ........................................................................................................................................................................................... 4
HOW TO KEEP THIS MANUAL ....................................................................................................................................................... 4
DECLARATION OF CONFORMITY ................................................................................................................................................ 4
IDENTIFICATION DATA ................................................................................................................................................................... 4
OTHER REFERENCE MANUALS ................................................................................................................................................... 4
SPARE PARTS AND MAINTENANCE ............................................................................................................................................. 4
CHANGES AND IMPROVEMENTS ................................................................................................................................................ 4
PURPOSE AND INTENDED USE ................................................................................................................................................... 4
CONVENTIONS .............................................................................................................................................................................. 5
UNPACKING/DELIVERY ................................................................................................................................................. 5
SAFETY ........................................................................................................................................................................... 5
SYMBOLS USED TO MARK INSTRUCTIONS ............................................................................................................................... 5
GENERAL INSTRUCTIONS ............................................................................................................................................................ 5
MACHINE DESCRIPTION ............................................................................................................................................... 8
MACHINE STRUCTURE GV 25 / GV 35 ......................................................................................................................................... 8
MACHINE STRUCTURE GV 702 .................................................................................................................................................... 8
TECHNICAL DATA ........................................................................................................................................................................... 9
WIRING DIAGRAM FOR GV25-EU GV35-EU .............................................................................................................................. 10
WIRING DIAGRAM FOR GV702-EU ............................................................................................................................................. 10
OPERATION .................................................................................................................................................................. 10
BASIC OPERATION ...................................................................................................................................................... 10
MAINTENANCE ............................................................................................................................................................. 12
STORAGE ...................................................................................................................................................................... 12
RECYCLING THE CLEANER ........................................................................................................................................ 12
4 GV 25 / GV 35 / GV 702 GV12066 (1) – 2012-04-10
ENGLISH USER MANUAL
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. Before
performing any procedure on the machine, the operators and qualified technicians must read this manual carefully. Contact Viper in
case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Viper will not be answerable for damages coming from
the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
The CE-declaration is printed in the Quick Start Guide.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
OTHER REFERENCE MANUALS
− Service Manual (can be consulted at Viper Service Centers)
− Spare Parts List (see www.vipercleaning.eu)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by Viper Service
Centers. Only original spare parts and accessories must be used. Contact Viper for service or to order spare parts and accessories,
specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Viper constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by Viper.
PURPOSE AND INTENDED USE
The appliance is suitable for picking up dry, non-ammable dust and liquids.
This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental businesses.
Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk
for such use is borne solely by the user.
Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.
GV12066 (1) – 2012-04-10 GV 25 / GV 35 / GV 702 5
USER MANUAL
ENGLISH
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working
position with the handle.
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary precautions to safeguard people and property.
The operator’s cooperation is essential in order to prevent injury. No accident prevention program is effective without the total cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving
around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is the best
guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS USED TO MARK INSTRUCTIONS
DANGER!
Danger that leads directly to serious or irreversible injuries, or even death.
WARNING!
Danger that can lead to serious injuries or even death.
CAUTION!
Danger that can lead to minor injuries and damage.
NOTE
Indicates a remark related to important or useful functions.
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
The appliance must
− only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating
it
− only be operated under supervision
− not be used by children
Do not use any unsafe work techniques.
Never use the vacuum cleaner without a filter.
Switch off the appliance and disconnect the mains plug in the following situations:
− Prior to cleaning and servicing
− Prior to replacing components
− Prior to changing over the appliance
Use of the cleaner is subject to current national regulations. Besides the operating instructions and binding accident prevention regulations valid in the country of use, observe recognized regulations for safe and proper work.
TRANSPORT
Before transporting the dirt tank, close all the locks.
Do not tilt the cleaner if there is liquid in the dirt tank.
Do not use a crane hook to lift the cleaner.
OPERATION
Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
The machine working temperature must be between 0°C and +40°C.
The humidity must be between 30% and 95%.
Loading...