Viper AS710R User Manual
Ride-on Scrubbers
USER MANUAL
READ USER MANUAL CAREFULLY BEFORE USE
Please fill out & return your warranty card
Model #
Serial No.#
VIPER INDUSTRIAL ESTATE
LIANG BIAN, LIAO BU
DONGGUAN, GUANGDONG
CHINA
TEL: (0769)83293988
FAX: (0769)83280104
VIPER…exceptional value
VR10029 REV.01
2014-12-30
https://harrissupplyind.com - To Order Parts Call 608-268-8080
https://harrissupplyind.com - To Order Parts Call 608-268-8080
https://harrissupplyind.com - To Order Parts Call 608-268-8080
https://harrissupplyind.com - To Order Parts Call 608-268-8080
https://harrissupplyind.com - To Order Parts Call 608-268-8080
USER MANUAL
5
SAFETY PRECAUTIONS
This machine is intended for commercial use. It is constructed for use in an indoor environment
and is not intended for any other use. Use only with recommended accessories.
All operators shall read, understand and exercise the following safety precautions:
1) DO NOT OPERATE MACHINE:
• Unless trained and authorized.
• Unless you have read and understand the user manual.
• In flammable or explosive areas.
• If not in proper operating condition.
• In outdoor areas.
2) BEFORE OPERATING MACHINE:
• Make sure all safety devices are in place and operate properly.
3) WHEN USING MACHINE:
• Go slow on inclines and slippery surfaces.
• Follow all safety guidelines.
• Be very careful when using the machine in reverse.
• Report and repair any damage to machine prior to operating it.
4) BEFORE LEAVING OR SERVICING MACHINE:
• Never park the machine on a slope.
• Turn machine off.
5) WHEN SERVICING MACHINE:
• Read user manual thoroughly prior to operating or servicing this machine.
• Use manufacturer supplied or approved replacement parts.
• Use approved jack or hoist to safely elevate the machine.
• Disconnect batteries prior to working on machine.
• Wear gloves when handling batteries or battery cables.
• Avoid moving parts. Do not wear loose fitting clothing while servicing machine.
6）SAFETY DEVICES
• Emergency-stop button(A15)
The machine comes to a sudden halt including all functions and no display can be
seen on the control panel（A13） when you press the emergency-stop button.
• Safety button (A1).
Switch off the drive motor after a 0.5 second delay, if the operator leaves the
operator seat during operation or while moving. The LED screen displays STOP.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
Loading...