Viper 9211VL Owner's Manual
Contents
Responder One .................................................................................................3
Basic Commands ..............................................................................................4
Remote Start .............................................................................................4
Unlock .....................................................................................................4
Shut Off the Remote Start ...........................................................................5
Remote Control Configuration .............................................................................6
Remote Pairing .........................................................................................6
Remote Start Features ........................................................................................7
Disabling Remote Start ..............................................................................7
Remote and System Operations ..........................................................................8
Out of Range ...........................................................................................8
Battery Information ....................................................................................8
Battery Replacement ..................................................................................9
Government Regulations ..................................................................................10
Warning! Safety First .......................................................................................11
Limited Lifetime Consumer Warranty ..................................................................13
9211VL 2012-07-11
Responder One
Internal
Antenna
Feature Description
Internal Antenna Used for transmitting and receiving information
Transmit LED
1
Remote Start
1
Shut down Remote Start
1
Unlock
Transmit LED flashes once when transmitting and receiving information.
Press for one second to activate remote start.
Press and hold for 3 seconds to deactivate the remote
start.
Press for one second to unlock. (Will only work if remote
start is active)
Transmit
LED
1
© 2012 Directed. All rights reserved.
3
Basic Commands
Remote Start
Press
and release the button.
Activates the remote starter. The remote responds with the remote start
On tone and the green LED on the remote flashes once. The vehicle's
parking lights turn ON constant to confirm remote start signal has been
received.
The runtime on the remote starter is predetermined based on vehicle
application. The remote starter will shut down when the preset runtime
times out or when any shutdown zone becomes active.
Refer to the Quick Reference Guide for more information.
Note
Unlock
Press
and release the button.
Unlock function will only work when the vehicle is remote started. The
remote responds with 2 short beeps and the green LED on the remote
flashes once. The vehicle responds by flashing the parking lights twice
to confirm unlocking.
4
© 2012 Directed. All rights reserved.
Shut Off the Remote Start
Press
and hold the button for 3 seconds.
The vehicle shuts down from the remote start mode. The remote plays
the remote start shut off tone and the orange LED flashes 1 time.
The remote starter will also shut down when the preset runtime times out
or when any shutdown zone becomes active.
Refer to the Quick Reference Guide for more information.
Note
© 2012 Directed. All rights reserved.
5
Loading...