Viper 9153VL, 9251VL Owner's Manual
Contents
Responder LE 2-Way & 1-Way............................................................................. 3
Advanced Remote Control Commands ................................................... 4
Fault Condition Alerts ........................................................................... 4
Basic Commands ................................................................................................. 5
Remote Start ........................................................................................ 5
Lock ................................................................................................... 5
Unlock ................................................................................................ 5
AUX/Trunk .......................................................................................... 5
Advanced Commands .........................................................................................6
Runtime Reset ...................................................................................... 6
Remote Control Configuration ..............................................................................7
Remote Programming ........................................................................... 7
Remote Pairing ................................................................................... 7
Remote Features ................................................................................. 8
Keypad Lock ....................................................................................... 9
Remote Beeps* .................................................................................... 9
Remote Start Features ........................................................................................ 10
Disabling Remote Start ....................................................................... 10
Remote and System Operations .......................................................................... 11
Out of Range .................................................................................... 11
No Remote Output ............................................................................. 11
Battery Information ............................................................................................12
Low Battery ....................................................................................... 12
Low Battery Alerts .............................................................................. 12
Battery Life ........................................................................................ 13
Battery Replacement Responder LE 2-Way ............................................ 13
Battery Disposal ................................................................................ 14
Government Regulations .................................................................................... 15
Warning! Safety First .........................................................................................17
Limited Lifetime Consumer Warranty ................................................................... 18
9251-9153VL 2012-07-11
Responder LE 2-Way & 1-Way
AUX
AUX
AUX
Internal
Antenna
Transmit
LED
Ghost
LED’s*
AUX
Feature Description
Internal Antenna Used for transmitting and receiving* information
Transmit LED
Ghost LEDs
erm denotes that
(T
these LEDs are only
visible when On.)
1
2
3
4 AUX
5
Transmit LED flashes once when transmitting and receiving*
information.
Each button has an associated LED next to it that are active
during related operations. These LEDs are labeled respectively as: Lock LED, Unlock LED, Remote Start LED, Aux LED,
LED
and
*
Press for one second to lock.
Press for one second to unlock.
Press for one second to activate remote start.
Press and hold for 5 seconds to activate optional trunk
release or other optional accessory.
Allows access to programming and modifies operation of
the other buttons.
* Ghost LEDs and 2-way communications are only applicable to the
Responder LE 2-way remote control.
© 2012 Directed. All rights reserved.
1
2
3
4
5
3
Advanced Remote Control Commands
AUX
AUX
Refer to the Quick Reference Guide for more information
on advanced remote start commands that are specific to
each vehicle.
Fault Condition Alerts
If, when performing a command, a condition exists that does not allow activation of a Remote Start feature*, the
plays to alert of the fault condition**.
* Remote Start feature not available when the Remote Start status is
incorrect upon receiving the command. (Example: Runtime reset
command received when remote start is off).
Refer to the notes included in the command descriptions that address these faults or go to Remote Start Faults under the Remote
Start Features section for more details.
LED and a fault tone
** Confirmation
LED and tone are only applicable to the Re-
sponder LE 2-way remote control.
4
© 2012 Directed. All rights reserved.
Basic Commands
AUX
AUX
Remote Start
Press and release
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn On and the Remote start LED and On tones play
or the engine and parking lights turn Off and the Remote start LED
and Off tones play to confirm
1
. The runtime on the remote starter is
predetermined based on vehicle application. The remote starter will
shut down when the preset runtime times out or when any shutdown
zone becomes active.
Refer to the Quick Reference Guide for more information.
Note
Lock
Press and release
The doors lock (if connected) and parking lights flash once. The Lock
LED and beeps play to confirm
1
.
Unlock
Press and release
The doors unlock (if connected) and parking lights flash twice. The
Unlock LED and beeps play to confirm
1
.
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 5 seconds. The Aux LED and tones play to confirm
1
.
1
,
1 Confirmation LEDs, beeps and tones are only applicable to the Responder LE 2-way
remote control.
© 2012 Directed. All rights reserved.
5
Advanced Commands
AUX
AUX
AUX
Refer to the Quick Reference Guide for more information
on advanced commands that are specific to each vehicle.
Runtime Reset
Press the
Re-starts the remote start runtime counter if remote start is active.
button 1 time and then
.
6
© 2012 Directed. All rights reserved.
Loading...