Viper 7250R Owner's Manual
7250R Remote Control
Quick Reference Guide
Congratulations on the purchase of your Viper
Home Security Accessory. This guide walks you
through the process of adding this accessory to your
system.
Note: Make sure you already have a Viper Home
Starter kit or Viper Home Hub installed. Please refer
to the quick reference guides found in these systems, or visit: www.viper.com/home/support.
1. Log into your Viper Home account at:
2. To pair the remote control to your system:
Click on the “Devices” tab
Click “Add New Device”
Click “Add Key Fob”
3. You need to assign an account user to this
remote. Click the “Browse” button and select
the desired user for the remote control.
4. You are then prompted to insert the batter-
ies provided within three minutes. Using a
coin, remove battery cover on the back of the
remote control, and install the CR2450 battery
provided.
home.viper.com
5. Once the battery is inserted the system auto-
matically connects and confi rms the remote
control is paired with your system. If the
remote does not connect when the battery
is installed, remove the battery and press any
button on the remote a few times and then
repeat the pair process.
6. Once completed, click the “Finish” button.
The remote control is now ready for use.
Remote Control:
Arms the system in arm away status.
Disarms the system.
Arms the system in the arm stay status.
Arms the system in the arm custom status.
+ (SOS) – When these buttons are pressed
© 2013 Directed. All rights reserved.2
Loading...