Viper 501C Owner's Manual

501C Window/Door Sensor

Quick Reference Guide

Congratulations on the purchase of your Viper
Home Security Accessory. This guide walks you
through the process of adding this accessory to your
system and for mounting your accessory.

Note: Make sure you already have a Viper Home
Starter kit or Viper Home Hub installed. Please refer
to the quick reference guides found in these sys­tems, or visit: www.viper.com/home/support.

1. Log into your Viper Home account at:

2. To pair the Window/Door sensor to your
system:

Click on the “Devices” tab
Click “Add New Device”
Click “Add Window/Door sensor”

3. You are then prompted
to insert the batteries
provided within three
minutes. Use a coin to
pry open the sensor and
insert the one AA battery
provided.

4. Once the batteries are
inserted the system auto­matically connects and confi rms the Window/

home.viper.com

Door sensor is paired with your system.

Door or
Window

Align
dots

Door Frame or
Window Frame

5. After the sensor is paired, you can give it a
unique name (i.e. “Front Door”)
In this screen, if you click the “More” button,
you can set up additional options for the de­vice, such as “arm stay”, or “custom arm”, as
well as select what action the sensor performs
when triggered.

6. Once completed, click the “Finish” button.
The sensor is now ready for mounting.

Mounting instructions:

1. Mount the larger part of the sensor (Magnetic
Detector) on the frame side of the door or
window that the sensor is to be used with.

2. Mount the smaller part of the sensor (the Mag­net) on the door or window surface opposite
the Magnetic Detector.

3. Makes sure the align­ment marks (small
dots) on the sensor are
facing each other. The
two parts of the sensor
should not be more
than ¾” apart.

4. The sensor should be
mounted high and out
of reach on either the door or window being
used.

© 2013 Directed. All rights reserved.2