Viper 4108V, 4208V Owner's Manual

OWNER’S GUIDE
MODEL
Since its inception, Directed has had one pur-
pose, to provide consumers with the finest
vehicle security products and accessories
available. The recipient of nearly 100 pat-
ents and Innovations Awards in the field of
Quality Directed products are sold and ser-
viced throughout North America and around
the world.
Call (800) 876-0800 for more information
about our products and ser vic es.
Vista, Ca 92081
www.directed.com
Directed is committed to delivering world class quality products and services that excite and delight our customers.
®
No oNe Dares Come Close
®
4208V
4108V
©
2012 Directed. All rights reserved. G4208V ML 2012-12
1
© 2012 Directed. All rights reserved.
Contents
Responder LE 2-Way & 1-Way............................................................................. 2
Advanced Remote Control Commands ................................................... 3
Fault Condition Alerts ........................................................................... 3
Basic Commands ................................................................................................. 3
Lock ................................................................................................... 3
Unlock ................................................................................................ 3
Remote Start ........................................................................................ 4
Remote Features ................................................................................. 4
Keypad Lock ....................................................................................... 5
Remote Beeps ...................................................................................... 5
Additional Remotes ............................................................................................. 6
Remote Start Features .......................................................................................... 6
Disabling Remote Start ......................................................................... 6
Remote and System Operations ............................................................................6
Out of Range ...................................................................................... 6
No Remote Output ............................................................................... 7
Battery Information .............................................................................................. 7
Low Battery ......................................................................................... 7
Low Battery Alerts ................................................................................ 7
Battery Life .......................................................................................... 8
Battery Replacement Responder LE 2-Way .............................................. 8
Battery Disposal .................................................................................. 9
Government Regulations .................................................................................... 10
Warning! Safety First ......................................................................................... 10
Limited Lifetime Consumer Warranty ................................................................... 12
2
© 2012 Directed. All rights reserved.
Responder LE 2-Way & 1-Way
AUX
1
2
3
4
5
8
7
6
* Ghost LEDs and 2-way communications are only applicable to the
Responder LE 2-way remote control.
Feature Description
1 Internal Antenna:Used for transmitting and receiving* infor-
mation
2 Transmit LED flashes once when transmitting and receiving*
information.
3 Each button has an associated LED next to it that are active
during related operations. These LEDs are labeled respec­tively as: Lock LED, Unlock LED, Remote Start LED, Aux LED,
and
LED. Ghost LEDs (T
erm denotes that these LEDs are
only visible when On.)
*
4 Press for one second to lock.
5 Press for one second to unlock.
6 Press for one second to activate remote start.
7
Press and hold for 5 seconds to activate optional trunk release or other optional accessory.
8 Allows access to programming and modifies operation of
the other buttons.
3
© 2012 Directed. All rights reserved.
Advanced Remote Control Commands
Refer to the Quick Reference Guide for more information on advanced remote start commands that are specific to each vehicle.
Fault Condition Alerts
If, when performing a command, a condition exists that does not al­low activation of a Remote Start feature*, the
LED and a fault tone
plays to alert of the fault condition**.
* Remote Start feature not available when the Remote Start status is
incorrect upon receiving the command. (Example: Runtime reset command received when remote start is off). Refer to the notes included in the command descriptions that ad­dress these faults or go to Remote Start Faults under the Remote Start Features section for more details.
** Confirmation
LED and tone are only applicable to the Re-
sponder LE 2-way remote control.
Basic Commands
Lock
Press and release The doors lock (if connected) and parking lights flash once. The Lock LED and beeps play to confirm
1
.
Unlock
Press and release The doors unlock (if connected) and parking lights flash twice. The Unlock LED and beeps play to confirm
1
.
4
© 2012 Directed. All rights reserved.
Remote Start
Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the Remote start LED and On tones play
1
, or the engine and parking lights turn Off and the Remote start LED and Off tones play to confirm
1
. The runtime on the remote starter is predetermined based on vehicle application. The remote starter will shut down when the preset runtime times out or when any shutdown zone becomes active.
Note
Refer to the Quick Reference Guide for more information.
AUX/Trunk
Press and hold AUX The Trunk opens (if connected) when this button is pressed for 5 sec­onds. The Aux LED and tones play to confirm
1
.
Remote Features
1. Press and hold the button for 8 seconds, the remote emits one
long beep and the transmit LED turns on.
2. Press the
button to access the remote operation features, 2 transmit LED flashes and 2 beeps indicate the remote features menu is accessed. Press the buttons indicated in the tables below to set the feature option.
Responder LE 2-way remote control The Ghost LEDs next to the button indicate the feature settings. 1-way remote control: The 1-way remote will flash the transmit LED to indicate the setting.
1 Confirmation LEDs, beeps and tones are only applicable to the Responder LE 2-way remote control.
5
© 2012 Directed. All rights reserved.
Feature Button
Press
LED on LED off LED Flash
Keypad Lock
Auto Off
Remote Beeps*
Beeps On Beeps Off Triggers only
* This feature is not available on 1-way remote control.
3. Remote programming will exit by itself after 30 seconds and the transmit LED will turn off.
Keypad Lock
Options: Off, Auto When Off, the buttons do not lock and always perform a command when pressed. When set to Auto, the remote buttons lock after a 20 second lapse between buttons presses to prevent unintentional opera­tions. If a button is pressed when locked the
LED and a fault tone
play as an alert*. To unlock the buttons, press the
button followed
by the
button. The Ghost LEDs flash and tones play to confirm unlocking.* * LED will flash on triggers on the Responder LE 2-way remote con-
trol only.
Remote Beeps*
Options: On, Off, Triggers Only (not available)
The Responder LE will emit a beep as confirmation of button presses and command responses. When set to Off, beeps are not emitted for any operations except programming. * This feature is not available on 1-way remote control.
6
© 2012 Directed. All rights reserved.
Additional Remotes
This device does not support end user programming. To add a new remote, please consult your local 12-volt retailer to have one pro­grammed for you.
Remote Start Features
Refer to the Quick Reference Guide for more information on remote start features that are specific to each vehicle.
Disabling Remote Start
Remote start can be disabled by moving the Toggle Switch to the Off position. If remote start is attempted while Off, the engine will not start. Move the switch back to the On position to resume normal operation.
Note
Consult your local 12-volt retailer for the location of Toggle switch.
Remote and System Operations
These Remote and System Operations are only applicable to Re­sponder LE 2-way remote control.
Out of Range
Each time a command is performed the Responder LE will expect a command confirmation from the system. If a command confirmation is not received the
and transmit LEDs flash and a long fault tone
plays as an alert.
7
© 2012 Directed. All rights reserved.
No Remote Output
Occasionally when a command is performed the remote may not generate a command confirmation output or Out of Range output. This indicates that the system received the command but it was an incomplete command (e.g. Aux button pressed too short to activate the trunk release) or it was an illegal message (e.g. the command was corrupted due to local RF interference). These are temporary nor­mal functions of the system and remote, perform the command again within 10 seconds to return to normal operation.
Battery Information
The Responder LE remote is powered by 2 batteries (PN CR-2016) and the 1-way companion remote by 1 battery (PN CR-2032) that can be purchased at most retailers. When the battery begins to weak­en, the operating range will be reduced. The information and precau­tions in this section can help maximize your battery’s life and usage in providing your Responder LE 2-way and 1-way remote controls with many years of trouble free operation.
Low Battery
After a command is performed the Responder LE 2-way and 1-way remote control check their battery level and, when the level requires attention, will begin generating alerts. Once the alerts begin, the re­mote controls will remain operational for several days but the battery/ batteries should be replaced at the earliest opportunity or failure to control the system may occur.
Low Battery Alerts
After performing a command, several beeps play on the Responder LE 2-way remote control to indicate the battery/batteries need replacing.
8
© 2012 Directed. All rights reserved.
Battery Life
The Responder LE remote control has many features that make it one of the most unique remote controls on the market today. The default fea­ture settings provide for excellent battery life. However, to maximize this battery life, the following suggestion will help:
Turn Beeps off: The Button beeps can be turned off in the Setup Re­mote menu. The command beeps still play normally.
Battery Replacement Responder LE 2-Way
1. Slide the battery cover up by apply­ing equal pressure at its top and bot­tom (the arrow on the cover indicates the direction), remove the cover from the remote control housing.
2. Gently pry up on the battery to re­move it from the holder. Insert a new bat-
tery into the holder and under the clip with the positive (+) side up. Replace the battery cover. The remote control is now ready for use.
Battery
Cover
Battery
Clip
Rear View
+
1
2
9
© 2012 Directed. All rights reserved.
Battery Replacement Responder LE 1-Way
1. Using a small slotted screwdriver, insert into slot lo­cated as shown and carefully pry the front of the unit open until front is completely separated from housing.
2. Turn both the unit front and circuit board over, remove battery from clip and replace.
Note
Verify that the battery polarity is correct when replacing.
3. Reposition all parts and snap together.
Battery Disposal
Directed cares about the environment. If you need to dis­pose of the battery, please do so in accordance with your municipal requirements for battery disposal.
+
+
10
© 2012 Directed. All rights reserved.
Government Regulations
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip­ment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio com­munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
s Reorient or relocate the receiving antenna. s Increase the separation between the equipment and receiver. s Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
s Consult the dealer or an experienced radio / TV technician for help.
This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
Warning! Safety First
Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal.
Installation
Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600.
11
© 2012 Directed. All rights reserved.
Remote Start Capable
When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user’s sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user.
Interference
All radio devices are subject to interference which could affect proper performance.
Upgrades
Any upgrades to this product must be performed by an authorized Directed dealer. Do not attempt to perform any unauthorized modifications to this product.
Water/Heat Resistance
This product is not designed to be water and/or heat-resistant. Please take care to keep this product dry and away from heat sources. Any damage from water or heat will void the warranty.
12
© 2012 Directed. All rights reserved.
Limited Lifetime Consumer Warranty
Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf­ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was profession­ally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All com­ponents other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This warranty is non-transferable and is automatically void if: the unit’s date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what con­stitutes excessive damage and may refuse the return of any unit with excessive damage.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR
13
© 2012 Directed. All rights reserved.
COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.
Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State.
This warranty is only valid for sale of product(s) within the United States of America and in Canada. Product(s) sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied.
For further details relating to warranty information of Directed products, please visit the support section of Directed’s website at: www.directed.com.
This product may be covered by a Guaranteed Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800.
920-10011-01 2011-06
Loading...
+ 33 hidden pages