Congratulations on the purchase of your state-of-the-art Power
Sports Alarm System. Reading this Installer and Owner’s Guide
prior to using your system will help maximize the use of its many
features. For more information please visit us online (see back cover for URL). For any additional questions please contact your authorized Directed dealer or Directed at 1-800-753-0600. Additional
support is also available at: http://support.directed.com.
Note: This system is equipped with a sleep mode to lower current draw. After 96 hours of no activity, the system’s sleep mode
turns on and RF communication shuts down. If your system is not
responding to remotes, you may need to cycle ignition to wake
the unit up before remotes will control the system again.
3121 (500-10745) Version 1.0
Standard Remote Configuration
FunctionButtonAction
Arm
Press and release
Disarm
Panic
Aux Output
Tilt bypass
All Sensor Bypass
Anti-Jacking (On & Off)
Valet mode
Press and release
Press and hold (any system state)
Press and release (any system state)
+
Press and release within 5 seconds of arming
system
Press and release 2 times within 5 seconds
of arming system
Press and hold (ignition on & system
disarmed)
Cycle ignition on & off twice, then press
+
and release
2-Button Transmitter
Remote Learning
In case the remote is lost, or you want to add another remote (up
to 4 max), perform the following procedure:
1. With the system disarmed, turn the ignition ON & OFF 5
times within 15 seconds, and stay in the ON position on
the fifth time you turn the ignition ON. 3 seconds later the
Siren will chirp 3 times to indicate the system entered remote
learning mode.
2. Press any button on the remote. The siren will chirp the num-
ber of times corresponding to the sequence of the remote
location in the system. For example, the first remote learned
to the system will chirp once, the second two times, and so
on, until a total of 4 remotes are learned to the system.
3. Up to 4 remotes can be learned to the system. If you want to
learn a 5th remote, the 1st remote will be cleared from the
system, and when you learn a 6th remote, the 2nd remote
will be cleared, and so on.
4. To exit learn mode – The system will exit learn mode automat-
ically after 8 seconds or you can manually exit learn mode
by turning the ignition OFF. The siren will emit one long chirp
to indicate that learn mode has been exited.
Note: If your remote is lost or stolen, you can clear old remotes
from the system by simply learning the remaining remotes up to
4 times.
Arming
With the system disarmed and the ignition OFF, press the
once. The siren will chirp once, parking lights will flash once, and
LED will flash quickly. After 8 seconds, the system will fully arm,
and LED will flash slowly and engine will be disabled and all
trigger zones will be active.
Ignition Trigger
In armed mode, if the ignition is turned on, the system will be
triggered and the siren will sound, and the parking lights will flash
30 seconds. The system will repeat this 30 second-cycle of siren
and parking light flashes until the ignition is turned OFF. After the
ignition is turned to OFF, the system will complete the current 30
second cycle before the siren and parking lights stop.
1. Sensitivity for Tilt/Shock sensors are adjustable, see FUNC-
TION SELECT MENU 1&2.
2. If the motorcycle is tilted/moved:
• If the system is in Sleep mode: At first, the siren will
chirp and parking lights will flash 10 times, then the
siren will sound continuously for 30 seconds with parking light flashes.
• If the system is in Wake mode: The siren and parking
lights will trigger continuously for 30 seconds.
Note: Any alarm zone can be triggered up to 8 times per arming
cycle.
Arming and Bypassing Tilt Sensor
After arming the system, press
system will emit one long chirp to indicate that the Tilt sensor is
bypassed. In this mode, the LED will flash twice every 2 seconds.
once within 5 seconds. The
Arming and Bypassing Tilt and Shock Sensor
After arming the system, press
system will emit one long chirp to indicate that the Tilt sensor is
bypassed and then will chirp three more times to indicate that
shock sensor is also bypassed. In this mode, the LED will flash
twice every 2 seconds.
twice within 5 seconds, The
Disarming
In armed mode, press
parking lights will flash twice, and the system will be disarmed.
once. The siren will chirp twice, the
If the alarm was triggered during armed mode, the siren will chirp
4 times when disarming. The parking lights will flash a number of
times to indicate the last zone that was triggered when the system
was armed.
Table of Zones
Parking Light FlashSystem Triggered Zone
4 timesTilt/Shock sensor triggered
5 timesInstant triggered
6 timesLoop wire triggered
7 timesIgnition triggered
Aux
Press and release
as lighting or radio turn on, can be controlled by pressing these
buttons. By default, the aux channel sends a 1-second pulse on
the aux wire. This can change to a latched output that stays on
when the command is sent, and then turns off when the command
is sent again.
and
. An optional auxiliary function, such
Auto Re-Arming
Note: This is an optional feature that needs to be turned on. See
“Feature Settings” on page 8 for more information.
After disarming and no ignition activity, the system will re-arm after
60 seconds. During the 60 second countdown, the LED will flash
quickly. When the system re-arms, the siren will chirp and the
parking lights will flash once.
Panic
If you are threatened near your motorcycle, you can attract attention by triggering the system with your transmitter. Just press
for 2 seconds to enter panic mode. The siren will sound for 10